Nanoelectronics
Balwinder Raj
Sold by PBShop.store US, Wood Dale, IL, U.S.A.
AbeBooks Seller since 7 April 2005
New - Hardcover
Condition: New
Ships within U.S.A.
Quantity: Over 20 available
Add to basketSold by PBShop.store US, Wood Dale, IL, U.S.A.
AbeBooks Seller since 7 April 2005
Condition: New
Quantity: Over 20 available
Add to basketNew Book. Shipped from UK. Established seller since 2000.
Seller Inventory # L2-9781032745985
This book exhibits a unique way of explaining nanomaterials and devices and analyzing their design parameters to meet the sub-nanoregime challenges for low-power chip design. Since process variability, device sizing, and power supply scaling are ongoing challenges in very large-scale integration (VLSI) circuit designs, this book highlights the conventional and novel nanomaterials, devices and circuits, leakage current mitigation techniques, and other important trade-offs along with exhaustive analysis. More focus has been placed throughout the book on various trade-offs for high-speed and low-power VLSI devices and circuits co-design.
This book:
It is primarily written for senior undergraduates, graduate students, and academic researchers in the fields of electrical engineering, electronics and communications engineering, materials science, nanoscience, and nanotechnology.
Balwinder Raj (MIEEE’2006) is currently working as Associate Professor at the National Institute of Technology Jalandhar, India. He has more than 15 years of teaching and research experience. He did BTech in Electronics Engineering (PTU Jalandhar), MTech in Microelectronics (PU Chandigarh), and PhD in VLSI Design (IIT Roorkee), India, in 2004, 2006, and 2010, respectively. For further research work, the European Commission awarded him the “Erasmus Mundus” Mobility of Life research fellowship for postdoc research work at the University of Rome, Tor Vergata, Italy, in 2010–2011. Dr Raj received India4EU (India for European Commission) Fellowship and worked as visiting researcher at KTH University, Stockholm, Sweden, October–November 2013. He also visited Aalto University in Finland as visiting researcher during June 2017.
He had received Best Teacher Award from the Indian Society for Technical Education (ISTE), New Delhi, in 26 July 2013. Dr Raj received the Young Scientist Award from the Punjab Academy of Sciences during 18th Punjab Science Congress held on 9 February 2015. He has also received research paper award in the International Conference on Electrical and Electronics Engineering held at Pattaya, Thailand, from 11 to 12 July 2015. Dr Raj has authored/co-authored 8 books, 15 book chapters, and more than 150 research papers in peer-reviewed international/national journals and conferences. His areas of interest in research are classical/non-classical nanoscale semiconductor device modeling; nanoelectronics and their applications in hardware security; sensors and circuit design; FinFET-based memory design; low-power VLSI design; digital/analog VLSI design; and FPGA implementation.
Suman Lata Tripathi is working as Professor in Lovely Professional University with more than 21 years of experience in academics and research. She has completed her PhD in the area of microelectronics and VLSI design from MNNIT, Allahabad, India. She did her MTech in Electronics Engineering from UP Technical University, Lucknow, and BTech in Electrical Engineering from Purvanchal University, Jaunpur, India. She is also a remote post-doc researcher at Nottingham Trent University, London, UK, in the year 2022. She has published more than 102 research papers in refereed Springer, Elsevier, IEEE, and IOP science journals; conference proceeding; and e-books. She has also published 13 Indian patents and 4 copyrights. She has guided four PhD scholars and four are under submission stage. She has organized several workshops, summer internships, and expert lectures for students. She has worked as a session chair, conference steering committee member, editorial board member, and peer reviewer in international/national IEEE, Springer, Wiley, etc., journal and conferences. She has received the “Research Excellence Award” in 2019 and “Research Appreciation Award” in 2020 and 2021 at Lovely Professional University, India. She is recipient of IGEN Women’s for Green Technology “Women’s Achievers Award” on International Women’s Day, 8 March 2023. She had received the best paper at IEEE ICICS-2018. She has also received funded project from SERB DST under the scheme TARE in the area of microelectronic devices. She has edited and authored more than 19 books in different areas of Electronics and Electrical Engineering. She is associated for editing work with top publishers like Elsevier, CRC Taylor and Francis, Wiley-IEEE, SP Wiley, Nova Science, and Apple Academic Press. She is also working as book series editor for title, “Smart Engineering Systems” CRC Press, “Engineering System Design for Sustainable Developments”, and “Decentralized Systems & Next Generation Internet” Wiley-Scrivener, and conference series editor for “Conference Proceedings Series on Intelligent Systems for Engineering Designs” CRC Press Taylor & Francis. She is serving as academic editor of Journal of Electrical and Computer Engineering (Scopus/WoS, Q2), International Journal of Reconfigurable Computing (Scopus, Q3), and Active and Passive Electronic Component (Scopus, Q4), Hindawi. She is associated as senior member IEEE, Fellow IETE, and Life member ISC and is continuously involved in different professional activities along with academic work. Her area of expertise includes microelectronics device modeling and characterization, low-power VLSI circuit design, VLSI design of testing, and advanced FET design for IoT, embedded system design, reconfigurable architecture with FPGAs, and biomedical applications.
Tarun Chaudhary did her BTech in Electronics and Communication Engineering from UIET, Panjab University, Chandigarh, in 2010; MTech. in VDAT (ECE) from NIT Hamirpur, Himachal Pradesh, in 2012; and PhD from NIT Hamirpur, Himanchal Pradesh, India, in the year 2017. During her PhD she has worked on the designing and mathematical modeling of vertical FET. She is currently working as Assistant Professor in ECE Department, Dr B R Ambedkar National Institute of Technology Jalandhar, India. She has worked as a faculty member under SMDP C2SD Project from October 2017 till November 2019. She is guiding PhD and PG scholars in the areas of nanoscale devices and circuits, and FPGAbased design. She has 5 book chapters and more than 25 research papers in peer-reviewed international/national journals and conferences. She has organized several STCs and workshops in the domain of VLSI design. Of the three students who are pursuing their PhD under her supervision, all are working on TFETs, NCFETs, and nanowire-based sensors. Her present research is largely focused on the design and modeling of nanoscale devices, TFETs, junctionless devices, and low-power VLSI design circuits.
Mandeep Singh has done his BTech in Electronics and Communication Engineering, MTech ECE (VLSI DESIGN) from Punjabi University, Patiala, and PhD from NIT Jalandhar, Punjab, India. He has eight-year teaching experience to teach undergraduate and master students in Punjab Technical University, India; the National Institute of Technology Uttarakhand, India; and Chaudhary Charan Singh University, Meerut, UP, India. Currently he is working as Postdoc Researcher in the Indian Institute of Technology Kanpur, UP, India. He has published various research papers in the domain of VLSI design and circuit. His areas of research are semiconductor device modeling, memory designs, CNT and nanowires, and low-power VLSI designs.
"About this title" may belong to another edition of this title.
Returns Policy
We ask all customers to contact us for authorisation should they wish to return their order. Orders returned without authorisation may not be credited.
If you wish to return, please contact us within 14 days of receiving your order to obtain authorisation.
Returns requested beyond this time will not be authorised.
Our team will provide full instructions on how to return your order and once received our returns department will process your refund.
Please note the cost to return any...
If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
INFORMATION REGARDING THE RIGHT OF CANCELLATION
Statutory Right to cancel
You have the right to cancel this contract within 14 days without giving any reason.
The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.
To exercise the right to cancel, you must inform us, Paperbackshop-US, 901 Penhorn Avenue, Unit 6, 07094, Secaucus, New Jersey, U.S.A., 44 1285 712917, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.
To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.
Effects of cancellation
If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to us or Paperbackshop-US, PaperbackShopUS, 801 Penhorn Avenue Unit 5, 07094, Secaucus, New Jersey, U.S.A., 44 1285 712917, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of cancellation
The right of cancellation does not apply to:
Model withdrawal form
(complete and return this form only if you wish to withdraw from the contract)
To: (Paperbackshop-US, 901 Penhorn Avenue, Unit 6, 07094, Secaucus, New Jersey, U.S.A., 44 1285 712917)
I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),
Ordered on (*)/received on (*)
Name of consumer(s)
Address of consumer(s)
Signature of consumer(s) (only if this form is notified on paper)
Date
* Delete as appropriate.
Books are shipped from our US or UK warehouses. Delivery estimates allow for delivery from either location.
| Order quantity | 7 to 14 business days | 7 to 14 business days |
|---|---|---|
| First item | £ 0.00 | £ 0.00 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.