Micro-electrode-dot-array Digital Micro
Li Zipeng
Sold by Kennys Bookstore, Olney, MD, U.S.A.
AbeBooks Seller since 9 October 2009
New - Hardcover
Condition: New
Ships within U.S.A.
Quantity: 15 available
Add to basketSold by Kennys Bookstore, Olney, MD, U.S.A.
AbeBooks Seller since 9 October 2009
Condition: New
Quantity: 15 available
Add to basketThis book provides an insightful guide to the design, testing and optimization of micro-electrode-dot-array (MEDA) digital microfluidic biochips. The authors focus on the characteristics specific for MEDA biochips, e.g., real-time sensing and advanced microfluidic operations like lamination mixing and droplet shape morphing. Readers will be enabled to enhance the automated design and use of MEDA and to develop a set of solutions to facilitate the full exploitation of design complexities that are possible with standard CMOS fabrication techniques. The book provides the first set of design automation and test techniques for MEDA biochips. The methods described in this book have been validated using fabricated MEDA biochips in the laboratory. Readers will benefit from an in-depth look at the MEDA platform and how to combine microfluidics with software, e.g., applying biomolecular protocols to software-controlled and cyberphysical microfluidic biochips.
Zipeng Li received the bachelor’s degree in microelectronics from the Harbin Institute of Technology, Harbin, China, in 2013, and the master’s and Ph.D. degrees in computer engineering from Duke University, Durham, NC, USA, in 2015 and 2017, respectively. Dr. Li is currently a Senior DFT Engineer with Intel Corporation, Santa Clara, CA, USA. His current research interests include design automation for biochips, design-for-test, 2.5-D/3-D ICs, and mixed-technology microsystems.
Krishnendu Chakrabarty received the B. Tech. degree from the Indian Institute of Technology, Kharagpur, in 1990, and the M.S.E. and Ph.D. degrees from the University of Michigan, Ann Arbor, in 1992 and 1995, respectively. He is now the William H. Younger Distinguished Professor and Department Chair of Electrical and Computer Engineering, and Professor of Computer Science, at Duke University.
Prof. Chakrabarty is a recipient of the National Science Foundation CAREER award, the Office of Naval Research Young Investigator Award, the Humboldt Research Award from the Alexander von HumboldtFoundation, Germany, the IEEE Transactions on CAD Donald O. Pederson Best Paper Award (2015), the ACM Transactions on Design Automation of Electronic Systems Best Paper Award (2017), and over a dozen best paper awards at major conferences. He is also a recipient of the IEEE Computer Society Technical Achievement Award (2015), the IEEE Circuits and Systems Society Charles A. Desoer Technical Achievement Award (2017), the Semiconductor Research Corporation Technical Excellence Award (2018), and the Distinguished Alumnus Award from the Indian Institute of Technology, Kharagpur (2014). He is a Hans Fischer Senior Fellow at the Institute for Advanced Study, Technical University of Munich, Germany. He is a 2018 recipient of the Japan Society for the Promotion of Science (JSPS) Fellowship in the “Short Term S: Nobel Prize Level” category.
Tsung-Yi Ho received the Ph.D. degree in electrical engineering from National Taiwan University, Taipei, Taiwan, in 2005. He is a Professor with the Department of Computer Science, National Tsing Hua University, Hsinchu, Taiwan. His current research interests include design automation and test for microfluidic biochips and nanometer integrated circuits. He has presented 10 tutorials and contributed 11 special sessions in ACM/IEEE conferences, all in design automation for microfluidic biochips.
Prof. Ho was a recipient of the Invitational Fellowship of the Japan Society for the Promotion of Science, the Humboldt Research Fellowship by the Alexander von Humboldt Foundation, the Hans Fischer Fellow by the Institute of Advanced Study of the Technical University of Munich, the best paper awards at the VLSI Test Symposium in 2013, and the IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITSAND SYSTEMS in 2015. He is an Associate Editor of the ACM Journal on Emerging Technologies in Computing Systems, ACM Transactions on Design Automation of Electronic Systems, ACM Transactions on Embedded Computing Systems, the IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, and the IEEE TRANSACTIONS ON VERY LARGE SCALE INTEGRATION SYSTEMS. He served as a Distinguished Visitor of the IEEE Computer Society for 2013 to 2015, the Chair of the IEEE Computer Society Tainan Chapter for 2013 to 2015, and the Chair of the ACM SIGDA Taiwan Chapter for 2014 to 2015. He currently serves as an ACM Distinguished Speaker, a Distinguished Lecturer of the IEEE Circuits and Systems Society, and the Technical Program Committees of major conferences, including DAC, International Conference on Computer-Aided Design, Design, Automation & Test in Europe Conference, Asia and South Pacific Design Automation Conference, International Symposium on Physical Design, and International Conference on Computer Design.
Chen-Yi Lee received the B.S. degree in electrical engineering from National Chiao Tung University (NCTU), Hsinchu, Taiwan, in 1982 and the M.S. and Ph.D. degrees in electrical engineering from Katholieke University Leuven, Leuven, Belgium, in 1986 and 1990, respectively. From 1986 to 1990, he was with IMEC/VSDM, Leuven, researching in the area of architecture syn- thesis for DSP. In 1991, he joined the Department of Electronics Engineering and from 2003 to 2006. From 2000 to 2003, hewas the Director of National CHIP Implementation Center and the Co-Ordinator of Microelectronics Program of Engineering Division, National Security Council, Taipei, Taiwan. He was the Dean of office of research and development from 2007 to 2010, NCTU. He currently serves as the Co-Program Director of National Program of Intelligent Electronics and a Professor of the Department of Electronics Engineering, NCTU. His current research interests include very large scale integration (VLSI) algorithms and architectures for high- throughput DSP applications. He is also active in various aspects of micro sensing, low-power system-on-chip, and deep learning.
Prof. Lee was a recipient of the Outstanding Technology Licensing Award from National Science Council in 2007 and 2008, the Industry Contribution Award from Ministry of Economic Affairs, and the Outstanding Research Award from National Science Council in 2009. He served as the Program Committee Member of IEEE International Solid-State Circuits Conference in 2004–2006, Design, Automation & Test in Europe Conference TPC Member in 2006 and 2007, IEEE Asian Solid-State Circuits Conference TPC Member in 2006–2014, IEEE VLSI Symposium Committee Member in 2010–2014, IEEE Transactions on Circuits and Systems-II Associate Editor in 2010 and 2011, and the Past-Chair of Taipei Chapter of IEEE Circuits and Systems Society.
"About this title" may belong to another edition of this title.
We guarantee the condition of every book as it's described on the Abebooks websites.
If you're dissatisfied with your purchase (Incorrect Book/Not as Described/Damaged) or if the order hasn't arrived, you're eligible for a refund within 30 days of the estimated delivery date.
For any queries please use the contact seller link or send an email to books@kennys.ie
Conor Kenny
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to Kennys Bookstore, Olney, Maryland, U.S.A., without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
All books securely packaged. Some books ship from Ireland.
| Order quantity | 14 to 20 business days | 13 to 14 business days |
|---|---|---|
| First item | £ 7.94 | £ 15.87 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.