Methane Combustion over Lanthanum-based Perovskite Mixed Oxides
Language: English
Published by Springer, 2015
- Hardcover
- New

Seller: AHA-BUCH GmbH, Einbeck, GermanyAHA-BUCH GmbH
AbeBooks seller since August 14, 2006
Condition: New
£ 108.51
Quantity: 1 available
Add to basketItem description from seller
Druck auf Anfrage Neuware - Printed after ordering - This book presents current research into the catalytic combustion of methane using perovskite-type oxides (ABO 3 ). Catalytic combustion has been developed as a method of promoting efficient combustion with minimum pollutant formation as compared to conventional catalytic combustion. Recent theoretical and experimental studies have recommended that noble metals supported on (ABO 3 ) with well-ordered porous networks show promising redox properties. Three-dimensionally ordered macroporous (3DOM) materials with interpenetrated and regular mesoporous systems have recently triggered enormous research activity due to their high surface areas, large pore volumes, uniform pore sizes, low cost, environmental benignity, and good chemical stability. These are all highly relevant in terms of the utilization of natural gas in light of recent catalytic innovations and technological advances. The book is of interest to all researchers active in utilization of natural gas with novel catalysts. The research covered comes from the most important industries and research centers in the field. The book serves not only as a text for researcher into catalytic combustion of methane, 3DOM perovskite mixed oxide, but also explores the field of green technologies by experts in academia and industry. This book will appeal to those interested in research on the environmental impact of combustion, materials and catalysis.…
Seller Inventory # 9783662469903
- Title
- Methane Combustion over Lanthanum-based Perovskite Mixed Oxides
- Author
- Hamidreza Arandiyan
- Publisher
- Springer
- Publication year
- 2015
- Condition
- Neu
- Binding
- Buch
- Language
- English
- ISBN 10
- 3662469901
- ISBN 13
- 9783662469903
- Item weight
- 313 grams
- Dimensions
- 241x160x13 mm
This book presents current research into the catalytic combustion of methane using perovskite-type oxides (ABO3). Catalytic combustion has been developed as a method of promoting efficient combustion with minimum pollutant formation as compared to conventional catalytic combustion. Recent theoretical and experimental studies have recommended that noble metals supported on (ABO3) with well-ordered porous networks show promising redox properties. Three-dimensionally ordered macroporous (3DOM) materials with interpenetrated and regular mesoporous systems have recently triggered enormous research activity due to their high surface areas, large pore volumes, uniform pore sizes, low cost, environmental benignity, and good chemical stability. These are all highly relevant in terms of the utilization of natural gas in light of recent catalytic innovations and technological advances. The book is of interest to all researchers active in utilization of natural gas with novel catalysts. The research covered comes from the most important industries and research centers in the field. The book serves not only as a text for researcher into catalytic combustion of methane, 3DOM perovskite mixed oxide, but also explores the field of green technologies by experts in academia and industry. This book will appeal to those interested in research on the environmental impact of combustion, materials and catalysis.
"Synopsis" may belong to another edition of this title.
About the Author
His PhD work was undertaken in a world-top research group in the field of heterogeneous catalysis with a focus on pollution control technologies, environmental protection, and perovskite materials. The group houses the state-of-the-art instruments including well-established in-situ FT-IR and cutting-edge analytical electron microscopy enabling the monitoring of catalysts and reactions. The group was sustained by 16 interdisciplinary members of faculty at the THU and Chinese Academy of Sciences (CAS) which also part of the Hi-Tech Research and Development Program of China (863), financed by National Natural Science Foundation of China (NSFC), Sino-Japan Collaboration Project funded by Toyota Motor Inc. and Ford Motor Co. in Michigan (USA) where Dr Arandiyan got the prestigious doctoral fellowship.
He actively involved in research in the advancedanalysis on developing noble 3D catalysts for vehicle emissions control which is cutting edge in nature and will be the foundation for developing 3D hybrid perovskite structures for VOCs oxidation. It can be demonstrated through his excellent research track record (1 Scholarly Book Chapter, 38 relevant peer-reviewed articles, 18 Intl. Conference papers, and 3 Patents in research filed of the proposed book publishing). He had two semesters teaching experience in School of Chemical Engineering at Azad University. He also has been invited to be a reviewer for more than 20 referred international journals.
During last years, most of his time is allocated for research. Besides this he has been achieved several scientific awards for instance: he won 2013 First Grand Prize “American Dow Sustainability Innovation Challenge Award”, which is highly competitive and funds top (US$ 10K) new investigator scientists from USA and Europe. He has also awarded “Outstanding PhD Dissertation” (2014), “Young Scientist Award” Taiwan (2013), “Certificate of Appreciation Research” by Iran’s Ambassador in China (2014).
It was an honour when he was appointed the youngest ever Top 10 Student of Tsinghua University Award for 2013. It's not hard to see how tough it is to stand out from the more than 40,000 students from dozens of departments. Among all 4-5th year talented PhD students, second year PhD candidate (Dr. Arandiyan) became the first foreign student to accomplish this award in 102 years. He takes great satisfaction in being a significant role model for international students at Tsinghua University, which is considered to be a Top Chinese University.
Furthermore, a number of other honours have followed including: Received “Chinese Government Scholarship-CSC” Ministry of Education of China (2012-2014), “Comprehensive Postgraduate Scholarship” at THU (2013), “Outstanding Publication PhD Candidate” (2013), “Outstanding Qualifying DoctoralExamination” (2012), and “Chinese Scholarship Council” (2011). In the last 3 years, he has obtained outstanding experiences in new synthesis 3D hybrid catalysts. Develop colloidal syntheses strategies to synthesize nanoparticles of transition metals and application to heterogeneous transformations of a wide range of pure and multi-component metal nanoparticles.
Significant research outputs
IF: 2015 (5-years Impact Factor)
ERA: 2010 Excellence in Research for Australia
*: Belongs to corresponded author
300 citations and an h-index of 12(Google Scholar)
i) Scholarly Book Chapters;
1) Arandiyan, H., Li, J., 2012, Catalytic CO2 reforming of methane over perovskite noble metals, in Li, H; Xu, QJ; Zhang, D, Advanced Materials Research, pp. 1070–4 TRANS TECH PUBLICATIONS LTD, LAUBLSRUTISTR 24, CH-8717 STAFA, ZURICH, SWITZERLAND.
ii) Refereed Journal Articles;
2) Arandiyan, H.*; Dai, H.; Li, J.; et al., Pt Nanoparticles Embedded in Colloidal Crystal Templating Derived 3D Ordered Macroporous Ce0.6Zr0.3Y0.1O2: Highly Efficient Catalysts for Methane Combustion. Accepted-Feb. 2015, ACS Catalysis, DOI: 10.1021/cs501773h, (IF: 7.572, ERA=N/A)
3) Arandiyan, H.*; Dai, H.; Li, J. et al., Enhanced catalytic efficiency of Pt nanoparticles supported on three-dimensionally ordered macro-/mesoporous Ce0.6Zr0.3Y0.1O2 for methane combustion. Accepted-Jan. 2015, Small, DOI: 10.1002/smll.201402951 (IF: 7.823, ERA=A*)
4) Zhao, Y.; Sun, H.*; Arandiyan, H.; et al., Well-Constructed Single-Layer Molybdenum Disulfide Nanorose Cross-Linked by 3D-Reduced Graphene Oxide Network for Superior Water Splitting and Lithium Storage Property. Accepted-Jan. 2015, Scientific Reports, DOI: 10.1038/srep08722, (IF: 5.078, ERA=N/A)
5) Fattah, Z.; Rezaei, M.*; Arandiyan, H., et al., Synthesis and Application of Co-MgO Mixed Oxides in Oxidation of Carbon Monoxide. Chemical Engineering Communications, Accepted-Jan. 2015DOI:10.1080/00986445. 2014.983269 (IF: 1.052, ERA=B)
6) Xie, S.; Dai, H.*; Arandiyan, H.; et al., Au–Pd/3DOM Co3O4: Highly active and stable nanocatalysts for toluene oxidation. Journal of Catalysis 2015, 322, 38-48. (IF: 6.423, ERA=A*)
7) Ji, K.; Dai, H.*; Arandiyan, H.; et al., 3DOM BiVO4 supported silver bromide and noble metals: High-performance photocatalysts for the visible-light-driven degradation of 4-chlorophenol. Applied Catalysis B: Environmental, 2015, 168, 274-282 (IF: 6.423, ERA=A)
8) Liu, Y.; Sun, H.*; Arandiyan, H.; et al., Mesoporous Co3O4 sheets/3D graphene nanohybrids for high-performance sodium-ion battery anode. J. Power Sources 2015, 273, 878-84. (IF: 5.257, ERA=B)
9) Ji, K.; Dai, H.*; Arandiyan, H.; et al., Fabrication and high photocatalytic performance of noble metal nanoparticles supported on 3DOM InVO4–BiVO4 for visible-light-driven degradation of rhodamine B and methylene blue. Applied Catalysis B: Environmental 2015, 165, 285-295. (IF: 6.423, ERA=A)
10) Arandiyan, H.; Dai, H.; Li, J.*, et al., Three-Dimensionally Ordered Macroporous La0.6Sr0.4MnO3 Supported Ag Nanoparticles for the Combustion of Methane. Journal of Physical Chemistry C 2014, 118, 14913-14928. (IF: 4.835, ERA=A*) Journal Front Cover Page.
11) Arandiyan, H.; Peng, Y.; Li, J.*, et al., Effects of noble metals doped on mesoporous LaAlNi mixed oxide catalyst and identification of carbon deposit for reforming CH4 with CO2. Journal of Chemical Technology & Biotechnology 2014, 89, 372-381. (IF: 2.494, ERA=B)
12) Xie, S.; Dai, H.*; Arandiyan, H.; et al., Preparation and high catalytic performance of Au/3DOM Mn2O3 for the oxidation of carbon monoxide and toluene. Journal of Hazardous Materials 2014, 279, 392-401. (IF: 5.123, ERA=A)
13) Akia, M.*; Yazdani, F.; Arandiyan, H., et al., A review on conversion of biomass to biofuel by nanocatalysts, Biofuel Research Journal 2014, 1, 16-25.( ERA=N/A)
14) Arandiyan, H.; Chang,H.; Li, J.*, et al., Dextrose-aided hydrothermal preparation with large surface area on 1D single-crystalline perovskite La0.5Sr0.5CoO3 nanowires without template: Highly catalytic activity for methane combustion. Journal of Molecular Catalysis A: Chemical 2013, 378, 299-306. (IF: 3.356, ERA=B)
15) Bai, B.; Arandiyan, H.; Li, J.*, Comparison of the performance for oxidation of formaldehyde on nano-Co3O4, 2D-Co3O4, and 3D-Co3O4 catalysts. Applied Catalysis B: Environmental 2013, 142–143, 677-683. (IF: 6.423, ERA=A)
16) Chang, H.; Li, J.*; Arandiyan, H.; et al., Ge, Mn-doped CeO2-WO3 catalysts for NH 3-SCR of NOx: Effects of SO2 and H2 regeneration. Catalysis Today 2013, 201, 139-144. (IF: 3.420, ERA=A)
17) Arandiyan, H.; Dai, H.; Li, J.*, et al., Three-dimensionally ordered macroporous La0.6Sr0.4MnO3 with high surface areas: Active catalysts for the combustion of methane. Journal of Catalysis 2013, 307, 327-339. (IF: 6.423, ERA=A*)
18) Liu, C.; Li, J.*; Arandiyan, H.; et al., Characterization of CeO2–WO3 catalysts prepared by different methods for selective catalytic reduction of NOx with NH3. Catalysis Communications 2013, 40, 145-148. (IF: 3.366, ERA=A)
19) Chen, J.; Li, J.*, Arandiyan, H.; et al., Low temperature complete combustion of methane over cobalt chromium oxides catalysts. Catalysis Today 2013, 201, 12-18. (IF: 3.420, ERA=A)
20) Liu, C.; Li, J.*, Arandiyan, H.; et al., Comparison on the Performance of α-Fe2O3 and γ-Fe2O3 for Selective Catalytic Reduction of Nitrogen Oxides. Catalysis Letters 2013, 1-8. (IF: 2.291, ERA=B)
21) Wang, Y.; Dai, H.*; Arandiyan, H., et al., Three-dimensionally ordered macroporous InVO4: Fabrication and excellent visible-light-driven photocatalytic performance for methylene blue degradation. Chemical Engineering Journal 2013, 226, 87-94. (IF: 4.181, ERA=A*)
22) Arandiyan, H.; Dai, H.*; Li, J., et al., Dual-templating synthesis of three-dimensionally ordered macroporousLa0.6Sr0.4MnO3-supported Ag nanoparticles: controllable alignments and super performance for the catalytic combustion of methane. Chemical Communications 2013, 49, 10748-10750. (IF: 6.718, ERA=A*)
23) Liu, Y.; Dai, H.*; Arandiyan, H.; et al., Au/3DOM La0.6Sr0.4MnO3: Highly active nanocatalysts for the oxidation of carbon monoxide. Journal of Catalysis 2013, 305, 146-153. (IF: 6.423, ERA=A*)
24) Wang, Y.; Dai, H.*; Arandiyan, H.; et al., 3DOM InVO4-supported chromia for the visible-light-driven photodegradation of rhodamine B. Solid State Sciences 2013, 24, 62. (IF: 1.883, ERA=B)
25) Li, X.; Dai, H.*; Arandiyan, H.; et al., Au/3DOM LaCoO3: High-performance catalysts for the oxidation of CO/toluene. Chemical Engineering Journal 2013, 228, 965-975. (IF: 4.181, ERA=A*)
26) Arandiyan, H.; Li, J.*; Ma, L.; et al., Methane reforming to syngas over LaNixFe1-xO3 (0≤x≤1) mixed-oxide perovskites in the presence of CO2 and O2. Journal of Industrial and Engineering Chemistry 2012, 18, 2103-2114. (IF: 2.011, ERA=A)
27) Ma, L.; Li, J.*; Arandiyan, H.; et al., Influence of calcination temperature on Fe/HBEA catalyst for SCR of NOx with NH3. Catalysis Today 2012, 184, 145-152. (IF: 3.420, ERA=A)
28) Liu, C.; Li, J.*; Arandiyan, H.; et al., Enhancement of Activity and Sulfur Resistance of CeO2 Supported on TiO2–SiO2 for the Selective Catalytic Reduction of NO by NH3. Environmental Science & Technology 2012, 46, 6182-6189. (IF: 5.481, ERA=A*)
29) Chen, J.; Li, J.*, Arandiyan, H.; et al., Distinguished Roles with Various Vanadium Loadings of CoCr2–xVxO4 (x = 0–0.20) for Methane Combustion. Journal of Physical Chemistry C 2011, 115, 17400-17408. (IF: 4.835, ERA=A*)
30) Chen, J.; Li, J.*, Arandiyan, H.; et al., Roles of Li+ and Zr4+ Cations in the Catalytic Performances of Co1–xMxCr2O4 (M = Li, Zr; x = 0–0.2) for Methane Combustion. Environmental Science & Technology 2011, 45, 8491-8497. (IF: 5.481, ERA=A*) 31)Chen, L.; Li, J.*; Arandiyan, H., et al., CeO–WO Mixed Oxides for the Selective Catalytic Reduction of NO over a Wide Temperature Range. Catalysis Letters 2011, 141, 1859-1864. (IF: 2.291, ERA=B)
32) Khalesi, A.; Arandiyan, H.; Parvari, M.*, Effects of Lanthanum Substitution by Sr/Cl in La-Ni-Al Perovskite Oxides in Dry Reforming. Chinese Journal of Catalysis 2008, 29, 960-968. (IF: 1.552, ERA=N/A)
33) Khalesi, A.; Arandiyan, H.; Parvari, M.*, Production of Syngas by CO2 Reforming on MxLa1-xNi0.3Al0.7O3-d (M = Li, Na, K) Catalysts. Industrial & Engineering Chemistry Research 2008, 47, 5892-5898. (IF: 2.235, ERA=A)
34) Arandiyan, H.; Parvari, M.*, Studies on mixed metal oxides solid solutions as heterogeneous catalysts. Brazilian Journal of Chemical Engineering 2009, 26, 63-74. (IF: 2.174, ERA=N/A)
35) Arandiyan, H.; Parvari, M.*, Preparation of La-Mo-V mixed-oxide systems and their application in the direct synthesis of acetic acid. Journal of Natural Gas Chemistry 2008, 17, 213-224. (IF: 1.042, ERA=N/A).
iii) Conference Submissions (e.g. Papers, Invited Presentations and Posters)
36) Arandiyan, H.*; Dai, H.; Li, J.; Amal, R.; Highly ordered Pt/3DOM Ce0.6Zr0.3Y0.1O2 with crystalline framework for the combustion of methane. Energy Future Conference, Australia, 2014.
37) Arandiyan, H.*; Dai, H.; Li, J. 3DOM La0.6Sr0.4MnO3-supported Ag NPs: catalytic performance for methane combustion. 17th National Conference on Catalysis of China, China, 2014.
38) Arandiyan, H.*; Li, J. Influence of the carbon on catalytic activity of noble metal perovskite-type mixed oxide for CO2 reforming of methane. 15th International Congress on Catalysis, Germany, 2012.
39) Arandiyan, H.*; Li, J. Template-free synthesis of single-crystalline perovskite LaSrMn nanowires: highly catalytic activity for methane combustion. 23th North American Catalyst Meeting, USA, 2013.
40) Arandiyan, H.*; Li, J. Dai, H.; Ag NPs embedded in3DOM La0.6Sr0.4MnO3 derived from the colloidal crystal templating strategy. 6th Asia-Pacific Congress on Catalysis, Taiwan, 2013.
41) Arandiyan, H.*; Dai, H.; Li, J. DMOTEG-PMMA dual-templating generation of 3DOM LSMO supported silver nanoparticle. 6th Japan-China Workshop on Environmental Catalysis, Japan, 2013.
42) Arandiyan, H.*; Liu, C., Enhancement on activity over novel CeO2 supported on TiO2-SiO2 binary metal oxide for NH3-SCR of NO. 15th International Congress on Catalysis, Germany, 2012.
43) Arandiyan, H.*; Liu, C. Characterization of CeO2-WO3 catalysts for selective catalytic reduction of NOx with NH3. International Conference on Environment Pollution Control, China, 2011.
44) Arandiyan, H.*; Li, J., Dry reforming of methane over LaNixFe(1-x)O3 mixed-oxide perovskites as catalysts precursors. 22nd North American Catalysis Society Meeting, USA, 2011.
45) Arandiyan, H.*; Li, J. Structural features of perovskites as catalysts precursors for CO2 reforming of CH4 on La0.4Al0.2Ni0.8M0.6O3.5th China-Japan Environmental Catalysis, China, 2011.
46) Arandiyan, H.*; Mahdi D.; Kazemian, H., Synthesis of SAPO-34 Molecular Sieves; effects of Operating Conditions on Final Products. Iran International Zeolite Conference, Iran, 2010.
47) Arandiyan, H.*; Kazemian, H., Prediction of breakthrough curves for dehydration of tetrahydrofuran by zeolite 4A in a fixed bed. Iran International Zeolite Conference, Iran, 2010.
48) Arandiyan, H.*; Parvari, M., Characterization and catalytic properties of LaMoxV1-xOn perovskites for direct formation of Acetic acid. 5th International Chemical Engineering Congress, Iran, 2008.
49) Arandiyan, H.*; Parvari, M., Effects of alkali and alkali-earth metals in catalyst of methane reforming. 5th International Chemical Engineering Congress, Iran, 2008.
50) Arandiyan, H.*; Parvari, M., Characterization and catalytic activity of (Sr, Ca)-La-Ni-Al perovskite oxide for production of syngas. 14th International Congress on Catalysis, South Korea, 2008.
51) Arandiyan, H.*; Parvari, M., Preparation, characterization and catalytic potentiality of perovskite structure for synthesis of acetic acid. 14th International Congress on Catalysis, South Korea, 2008.
52) Arandiyan, H.*, Parvari, M., Effect of preparation method on perovskite catalyst structure for synthesis of Acetic acid. European Congress of Chemical Engineering-6, Denmark, 2007.
53) Arandiyan, H.*, Parvari, M., A new Perovskite Catalytic System Consisting of LaMoV for Acetic Acid Synthesis from Ethane. European Congress of Chemical Engineering-6, Denmark, 2007.
iv) Other (e.g. major exhibitions, compositions or performances).
Thesis / Dissertations
54) Arandiyan, H.*, 2014, Methane Combustion over Lanthanum-based Perovskite Mixed Oxides, PhD Thesis (Outstanding PhD Dissertation).Dissertation).Dissertation).Dissertation).
55) Arandiyan, H.*, 2007, Investigation of Noble Metals Catalytic Effect on the Direct Synthesis Acetic acid from Natural Gas., Master Thesis.
56) Arandiyan, H.*, 2003, Study of Various Refining Stage and Unit Operation in Tehran Refinery, Undergraduate Dissertation.
Scientific Publications (Persian Language)
57) Arandiyan, H.*, Parvari, M., Comparison Study of Acetic acid Production Process. Iran Chemical Engineering Journal No. 26, February 2007. ISSN: 1735-5400.
58) Arandiyan, H.*, Parvari, M., Study of application of nano in oil, gas and petrochemicals industry. Iran Oil, Gas and Petrochemicals Magazine. No. 41, 2006.
59) Arandiyan, H.*, Parvari, M., Natural gas and economic evaluation in global market. Iran Oil, Gas and Petrochemicals Magazine 2006.
60) Arandiyan, H.*, Parvari, M., A recent advance of global and domestic’s supply/demand analysis of Acetic acid. Iran Oil, Gas and Petrochemicals Magazine. No. 42, October 2006.
61) Arandiyan, H.*, Parvari, M., The strategy and tactics of naturalgas in Western Europe. Iran Oil, Gas and Petrochemicals Magazine. No. 39, July 2006.
62) Arandiyan, H.*, Parvari, M., Study of application of nano in oil, gas and petrochemicals industry. Iran Oil, Gas and Petrochemicals Magazine. No. 41, 2006.
63) Arandiyan, H.*, Changalvayi, B., Types of Drilling mud. Iran Oil, Gas and Petrochemicals Magazine. No. 18, 2003.
64) Arandiyan, H.*, Changalvayi, B., Replace CNG with natural gas. Iran Oil, Gas and Petrochemicals Magazine. No. 22, 2003.
Patents
65) Arandiyan, H.*; Parvari, M., Study of Shaping, Design and Preparation of Mould Single Pore, Two Pore and Four Pore for Shaping Catalyst Nickel. Patent No. 39733.
66) Arandiyan, H.*; Parvari, M., Synthesis of Perovskite Catalyst Lanthanum-Molybdenum-Vanadium. Patent No. 39236.
67) Arandiyan, H.*; Parvari, M., Synthesis of Perovskite Catalyst Nickel-Aluminum-Lanthanum for Convert Natural Gas to Syn Gas. Patent No. 39732.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 7 to 10 business days | 5 to 7 business days |
|---|---|---|
| First item | £ 29.34 | £ 37.72 |
Payment methods
- Bank Wire Transfer
- Check
- Paypal
Store description
Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.
Specialty
Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & StudiumSeller's business information
AHA-BUCH GmbH
Garlebsen 48
Einbeck, Germany 37574
Imprint
Seller Info:
AHA-BUCH GmbH
represented by the managing director Christel Glass
Garlebsen 48
37574 Einbeck
Deutschland
Telefon: 055639996039
Telefax: 055639995974
E-Mail: abebooks@aha-buch.de
USt-IdNr.: DE261904229
registered at Commercial register Amtsgerichtes Göttingen
Handelsregisternummer HRB 200691
Alternative dispute resolution:
The European Commission provides a platform for out-of-court online dispute resolution (ODR platform), which can be accessed under https://ec.europa.eu/odr.
We have been a member of the "FairCommerce" initiative since 25.05.2018.
For more information, see www.fair-commerce.de.
Terms of sale
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes a legal transaction for purposes that can predominantly be attributed neither to their commercial nor their independent professional activity. An entrepreneur is any natural or legal person or a partnership with legal capacity who, when concluding a legal transaction, acts in the exercise of his independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The object of the contract is the sale of goods.
(2) If an article is listed by us at AbeBooks or ZVAB, the activation of the offer page at AbeBooks or ZVAB constitutes the binding offer to conclude a contract under the conditions contained in the article page.
(3) The contract is concluded via the online shopping cart system as follows:
The goods intended for purchase are stored in the "shopping cart". Via the corresponding button in the navigation bar you can call up the "shopping cart" and make changes there at any time.
After calling up the "Checkout" page and entering the personal data as well as the payment and shipping conditions, all order data will be displayed again on the order overview page.
Before sending the order, you have the option of checking all information again, changing it (also via the "back" function of the Internet browser) or cancelling the purchase.
By submitting the order via the "Buy now" button, you declare the acceptance of the offer in a legally binding manner, whereby the contract is concluded.
(4) The processing of the order and transmission of all information required in connection with the conclusion of the contract is partly automated by e-mail. You must therefore ensure that the e-mail address you have stored with us is correct, that the receipt of the e-mails is technically ensured and, in particular, that spam filters do not prevent it.
§ 3 Right of retention, retention of title
(1) You can only exercise a right of retention if it concerns claims from the same contractual relationship.
(2) The goods remain our property until full payment of the purchase price.
§ 4 Warranty
(1) The statutory warranty rights exist.
(2) In the case of used goods, the warranty period is one year from delivery of the item, deviating from the statutory regulation. The shortening of the deadline does not apply:
- culpably caused damages attributable to us from injury to life, limb or health and in the case of other damages caused intentionally or through gross negligence;
- insofar as we have fraudulently concealed the defect or have assumed a guarantee for the quality of the item.
(3) As a consumer, you are requested to check the item immediately upon delivery for completeness, obvious defects and transport damage and to inform us and the freight forwarder of any complaints as soon as possible. If you do not comply with this, this will have no effect on your statutory warranty claims.
§ 5 Choice of law, place of performance, place of jurisdiction
(1) German law shall apply. In the case of consumers, this choice of law shall only apply insofar as this does not withdraw the protection afforded by mandatory provisions of the law of the state of the consumer's habitual residence (principle of favourability).
(2) The place of performance for all services arising from the existing business relationships with us as well as the place of jurisdiction is our registered office, insofar as you are not a consumer, but a merchant, a legal entity under public law or a special fund under public law. The same applies if you do not have a general place of jurisdiction in Germany or the EU or if the domicile or habitual residence is not known at the time the action is brought. The right to appeal to the court at another statutory place of jurisdiction remains unaffected by this.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods shall expressly not apply.
II. Customer Information
- Identity of the Seller
AHA-BUCH GmbH
Garlebsen 48
D-37574 Einbeck
Germany
Telephone: 055639996039
E-mail: abebooks@aha-buch.de.
Alternative dispute resolution:
The European Commission provides a platform for out-of-court online dispute resolution (ODR platform), which can be accessed under https://ec.europa.eu/odr.
- Information on the conclusion of the contract
The technical steps for the conclusion of the contract, the conclusion of the contract itself and the correction options are carried out in accordance with the provisions "Conclusion of the contract" of our General Terms and Conditions (Part I.).
- Contract language, contract text storage
3.1. The contract language is german.
3.2. The complete text of the contract will not be stored by us. Before sending the order, the contract data can be printed out or electronically saved via the print function of the browser. After receipt of the order by us, the order data, the legally prescribed information for distance contracts and the General Terms and Conditions will be sent to you again by e-mail.
- Essential characteristics of the goods or services
The essential characteristics of the goods and/or services can be found in the respective offer.
- Prices and terms of payment
5.1. The prices stated in the respective offers as well as the shipping costs represent total prices. They include all price components including all applicable taxes.
5.2. The shipping costs incurred are not included in the purchase price. They can be called up via a correspondingly designated button on our website or in the respective offer, are shown separately in the course of the ordering process and are to be borne by you in addition, unless free shipping has been promised.
5.3. If the delivery is made to countries outside the European Union, we may incur additional costs for which we are not responsible, such as.B customs duties, taxes or money transfer fees (transfer or exchange rate fees of the credit institutions), which are to be borne by you. Any costs incurred for the transfer of money shall also be borne by you in cases where the delivery is made to an EU member state, but the payment was initiated outside the European Union.
5.4. The payment methods available to you are indicated under a corresponding button on our website or in the respective offer.
5.5. Unless otherwise stated for the individual payment methods, the payment claims from the concluded contract are due for payment immediately.
- Terms of delivery
6.1. The terms of delivery, the delivery date and, if applicable, existing delivery restrictions can be found under a correspondingly designated button on our website or in the respective offer.
Insofar as no other deadline is specified in the respective offer or under the correspondingly designated button, the delivery of the goods will take place within 3-5 days after conclusion of the contract (in the case of agreed advance payment, however, only after the time of your payment instruction).
6.2. Insofar as you are a consumer, it is regulated by law that the risk of accidental loss and accidental deterioration of the sold item during dispatch shall only pass to you upon handover of the goods, regardless of whether the shipment is insured or uninsured. This does not apply if you have independently commissioned a transport company not named by the entrepreneur or a person otherwise designated to carry out the shipment.
- Statutory liability for defects
Liability for defects is governed by the "Warranty" provision in our General Terms and Conditions (Part I).
last update: 01/06/2022
Privacy policy
Unless otherwise stated below, the provision of your personal data is neither required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide this will have no consequences. This only applies if no other information is provided in the subsequent processing operations.
Collection, processing and disclosure of personal data when placing orders
When ordering, we collect and process your personal data only to the extent necessary to fulfil and process your order and to process your enquiries. The provision of the data is necessary for the conclusion of the contract. Failure to provide this provision means that no contract can be concluded. The processing takes place on the basis of Art. 6 para. 1 lit.b GDPR and is necessary for the performance of a contract with you.
Your data will be passed on, for example, to the shipping companies and dropshipping providers selected by you, payment service providers, service providers for order processing and IT service providers.
In all cases, we strictly observe the legal requirements. The scope of data transmission is limited to a minimum.
Duration of storage
After completion of the contract, the data will first be stored for the duration of the warranty period, then taking into account legal, in particular tax and commercial retention periods and then deleted after expiry of the period, unless you have consented to further processing and use.
Rights of the data subject
If the legal requirements are met, you have the following rights under Articles 15 to 20 GDPR: Right to information, to correction, to erasure, to restriction of processing, to data portability.
In addition, pursuant to Article 21 (1) GDPR, you have the right to object to processing based on Article 6 (1) f GDPR and to processing for direct marketing purposes.
Contact us on request. The contact details can be found in our imprint.
Right to lodge a complaint with the supervisory authority
In accordance with Article 77 GDPR, you have the right to complain to the supervisory authority if you believe that the processing of your personal data is not lawful.
Right to object
If the personal data processing listed here is based on our legitimate interest pursuant to Art. 6 para. 1 lit. f GDPR, you have the right to object to this processing at any time with effect for the future for reasons arising from your particular situation.
Right of withdrawal
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to AHA-BUCH GmbH, Einbeck, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
- The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
- The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.
Shipping terms
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.
Privacy and security
Privacy policy
Unless otherwise stated below, the provision of your personal data is neither required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide this will have no consequences. This only applies if no other information is provided in the subsequent processing operations.
Collection, processing and use of personal data for orders
When ordering, we collect and use your personal data only to the extent necessary to fulfill and process your order and to process your inquiries. The provision of the data is necessary for the conclusion of the contract. Failure to provide this provision means that no contract can be concluded. The processing takes place on the basis of Art. 6 (1) lit.b GDPR and is necessary for the performance of a contract with you. Your data will not be passed on to third parties without your express consent. Excluded from this are only our service partners, which we need to process the contractual relationship or service providers whom we use in the context of order processing. In addition to the recipients named in the respective clauses of this data protection declaration, these are, for example, recipients of the following categories: shipping service providers, payment service providers, merchandise management service providers, service providers for order processing, web hosts, IT service providers and dropshipping merchants. In all cases, we strictly observe the legal requirements. The scope of data transmission is limited to a minimum.
Duration of storage
After completion of the contract, the data will first be stored for the duration of the warranty period, then taking into account legal, in particular tax and commercial retention periods and then deleted after expiry of the period, unless you have consented to further processing and use.
Rights of the data subject
If the legal requirements are met, you have the following rights under Articles 15 to 20 GDPR: Right to information, to correction, to erasure, to restriction of processing, to data portability. In addition, pursuant to Article 21 (1) GDPR, you have the right to object to processing based on Article 6 (1) f GDPR and to processing for direct marketing purposes.
Contact us on request. The contact details can be found in our imprint.
Right to lodge a complaint with the supervisory authority
In accordance with Article 77 GDPR, you have the right to complain to the supervisory authority if you believe that the processing of your personal data is not lawful.
last updated: 01/06/2022