Metal Matrix Composites : Wetting and Infiltration
Antonio Contreras Cuevas
Sold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
New - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: 1 available
Add to basketSold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
Condition: New
Quantity: 1 available
Add to basketDruck auf Anfrage Neuware - Printed after ordering - This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well.Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
Seller Inventory # 9783319918532
This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
Dr. José Egberto Bedolla Becerril obtained his Bachelor´s degree in Electrical Engineering (1974)at Universidad Michoacana in Mexico. He obtained his Ph.D. in Materials Science from Newcastle University, U.K. in 1980. He has published more than 120 scientific papers in international journals and symposia proceedings. His areas of expertise include pyrometallurgical processing and the synthesis and characterization of composites materials. He is a member of the Mexican Materials Society, and he belongs to the National Research System Level 2. He is a Lecturer and Researcher at the Institute of Metallurgical and Materials Research at Universidad Michoacana, México.
Dr. Melchor Salazar Martínez obtained his Master’s degree and Ph.D. in metallurgy and materials science at the Metallurgy and Materials Research Institute of Universidad Michoacana, México, in 1997 and 2002 respectively. He carried out postdoctoral work in at the Mexican Petroleum Institute. Since 2003, he has been a researcher at Mexican Petroleum Institute in a number of programs including Pipeline Integrity and the Exploitation of Fields in Deep Waters. His research areas are materials for offshore and deep-water applications, sulphide stress corrosion cracking (SSCC), hydrogen induced cracking (HIC), and prevention and analysis of failure. He is the author of more than 25 scientific papers.
Dr. José Lemus-Ruiz obtained his Bachelor´s degree in Physics and Mathematics (1991) and Master degree in Metallurgy and Materials Science (1994), both at Universidad Michoacana in Mexico. He received his Ph.D. in Materials Science at McGill University, Canada in 2000. Topics of expertise include: similar and dissimilar joining by liquid and solid diffusion bonding, metal/ceramic interactions, synthesis and characterization of ceramics, and metal matrix composites. He is a Lecturer and Researcher at the Institute of Metallurgical and Materials Research at Universidad Michoacana, and currently he is making a visting researcher at Concordia University in Montreal, Canada. He has published more than 70 scientific papers in international journals and symposia proceedings.
"About this title" may belong to another edition of this title.
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes...
**Right of withdrawal for consumers **
(A consumer is any natural person who concludes a legal transaction for purposes that can predominantly be attributed neither to their commercial nor their independent professional activity.)
Cancellation
Withdrawal
You have the right to revoke this contract within fourteen days without giving reasons.
The revocation period is fourteen days from the day,
on which you or a third party named by you, who is not the carrier, has taken possession of the goods, provided that you have ordered one or more goods within the framework of a uniform order and these are or will be delivered uniformly;
on which you or a third party named by you, who is not the carrier, has taken possession of the last goods, provided that you have ordered several goods within the framework of a single order and these are delivered separately;
on which you or a third party named by you, who is not the carrier, has taken possession of the last partial shipment or the last piece, provided that you have ordered goods that are delivered in several partial shipments or pieces;
In order to exercise your right of withdrawal, you must inform us (AHA-BUCH GmbH, Garlebsen 48, 37574 Einbeck, telephone number: 05563 9996039, fax number: 05563 9995974, e-mail address: service@aha-buch.de) of your decision to revoke this contract by means of a clear declaration (e.B. a letter sent by post, fax or e-mail). You can use the attached model withdrawal form, but this is not mandatory.
To comply with the revocation period, it is sufficient that you send the notification of the exercise of the right of revocation before the expiry of the revocation period.
Consequences of revocation
If you withdraw from this contract, we shall reimburse you all payments that we have received from you, including delivery costs (with the exception of the additional costs resulting from the fact that you have chosen a different type of delivery than the cheapest standard delivery offered by us), immediately and at the latest within fourteen days from the day on which we received the notification of your revocation of this contract.
For this repayment, we will use the same means of payment that you used for the original transaction, unless expressly agreed otherwise with you; in no case will you be charged any fees for this repayment.
We may withhold reimbursement until we have received the goods back or until you have provided proof that you have returned the goods, whichever is the earlier.
You must return or hand over the goods to us immediately and in any case at the latest within fourteen days from the day on which you inform us of the revocation of this contract. The deadline is met if you send the goods before the expiry of the period of fourteen days.
You bear the direct costs of returning the goods.
You only have to pay for any loss of value of the goods if this loss of value is due to handling of the goods that is not necessary to check the nature, characteristics and functioning of the goods.
Reasons for exclusion or extinction
The right of revocation does not apply to contracts
The right of revocation expires prematurely in the case of contracts
Sample withdrawal form
(If you want to cancel the contract, please fill out this form and send it back.)
To AHA-BUCH GmbH, Garlebsen 48, 37574 Einbeck, fax number: 05563 9995974, e-mail address: service@aha-buch.de :
I/we () hereby revoke the contract concluded by me/us () for the purchase of the following goods ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of notification on paper)
Date
(*) Delete as appropriate.
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.
| Order quantity | 30 to 40 business days | 7 to 14 business days |
|---|---|---|
| First item | £ 54.65 | £ 63.28 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.