The text presents fundamental principles and analysis of the separation of particulate matter. Analysis and reduction of air pollution involve a variety of technical disciplines. The effective way to control air pollution is to prevent the release of pollutants at the source. The treatment can involve intimately contacting the effluent gases with liquids or solids capable of selectively removing gaseous pollutants or, in the case of particulate contaminants, directing the effluent flow through a device in which the particles are captured on surfaces.

This book:

Introduces the principle of separation methods of particulate matter (PM), common control equipment of PM, and collection or removal efficiency of the equipment
Describes the concept of separation of particles by sieving/screening, the basic principles of screening equipment, and the screen's effectiveness
Present the fundamental theories of removing particulate and gaseous pollutants from effluent streams by pollution control operations, such as gravitational (gravity chambers) and centrifugal deposition (cyclone separator), electrostatic precipitation, filtration, and wet scrubbing and covers fundamental principles of membrane separation, membrane modules, process design, applications, and governing equations of plate and frame filter press and rotary drum filter
Deals with the basic understanding of reverse osmosis and its theoretical analysis by different total flux and capacity models and explains the basic understanding of adsorption onto the solid surface and their isotherm and kinetics
Includes ancillary material such as numerical problems, review questions, multiple choice questions, and exercises at the end of each chapter

It is primarily written for senior undergraduates, graduate students, and academic researchers in chemical engineering, mechanical engineering, environmental engineering, industrial engineering, manufacturing engineering, and chemistry.

About the Author

Subrata Kumar Majumder is a professor in the Chemical Engineering Department at the Indian Institute of Technology Guwahati, India. He completed his Ph.D. in Chemical Engineering from the Indian Institute of Technology Kharagpur. His research interests include applied multiphase flow and reactor development, mineral processing, extraction, micronano bubble science and technology, and its applications in wastewater treatment and enhanced oil recovery. He is a Fellow of the Council of Engineering and Technology (India), a Fellow of the International Society for Research and Development, London, a Fellow of the Indian Institute of Chemical Engineers, and a Fellow of the Association of Researchers & Academicians (India). He is a member of the Indian Institute of Mineral Engineers, a life member of the Institute of Engineers (India), a member of the Asia-Pacific Chemical, Biological & Environmental Engineering Society (PCBEE), and a member of the International Association of Engineers (IAE), Japan. He was the Editor of the Journal of Chemical Engineering Research Studies, Guest editor of the American Journal of Fluid Dynamics, Scientific & Academic Publishing Co., USA, Editorial board member of the Scientific Journal of Materials Science, an Editorial Board Member of the Journal of Science and Technology, Scientific and Academic Publishing, USA, Advisory board member of Excelling Tech Publishers (ETP), London. He is a recipient of Dr. A.V. Rama Rao best research award in 2022 by the Indian Institute of Chemical Engineers and the IIME Award on mineral beneficiation in 2008 from the Indian Institute of Mineral Engineers (IIME). He authored five other books and has over 120 publications in several reputed international journals. He has completed several sponsored and consultancy projects. He collaborates with Aalborg University, Denmark; University of Los Andes, Colombia; Curtin University, Australia; and Edith Cowan University, Australia. He has developed six massive open online courses (including the subject of this book) sponsored by Govt. of India. He has more than 20 years of experience in teaching, research and development.

For more details: https://www.iitg.ac.in/chemeng/faculty_profile.php?name=skm

"About this title" may belong to another edition of this title.

Store Description

Online Handel nur mit Neub�chern

Visit Seller's Storefront

Seller's business information

Moluna GmbH
Engberdingdamm 27, Greven, 48268, Germany

Sale & Shipping Terms

Terms of Sale

Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration

Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...

More Information

Right of withdrawal

If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

Information regarding the right of withdrawal

Statutory right to withdraw

You have the right to withdraw from this contract within 14 days without giving any reason.

The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.

To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.

To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.

Effects of withdrawal

If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to moluna, Greven, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of withdrawal

The right of withdrawal does not apply to:

The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.

Shipping Terms

II. Kundeninformationen

Identit�t des Verk�ufers

Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de

Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.

Informationen zum Zustandekommen des Vertrages

Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturm�glichkeiten erfolgen nach Ma�gabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Gesch�ftsbedingungen (Teil I.).

Vertragssprache, Vertragstextspeicherung

3.1. Vertragssprache ist deutsch .

3.2. Der vollst�ndige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung k�nnen die Vertragsdaten �ber die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzvertr�gen und die Allgemeinen Gesch�ftsbedingungen nochmals per E-Mail an Sie �bersandt.

Wesentliche Merkmale der Ware oder Dienstleistung

Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.

Preise und Zahlungsmodalit�ten

5.1. Die in den jeweiligen Angeboten angef�hrten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschlie�lich aller anfallenden Steuern.

5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind �ber eine entsprechend bezeichnete Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zus�tzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.

5.3. Die Ihnen zur Verf�gung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot ausgewiesen.

5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsanspr�che aus dem geschlossenen Vertrag sofort zur Zahlung f�llig.

Lieferbedingungen

6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschr�nkungen finden sich unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot.

Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfl�che keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).

6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zuf�lligen Untergangs und der zuf�lligen Verschlechterung der verkauften Sache w�hrend der Versendung erst mit der �bergabe der Ware an Sie �bergeht, unabh�ngig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenst�ndig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausf�hrung der Versendung bestimmte Person beauftragt haben.

Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.

Gesetzliches M�ngelhaftungsrecht

Die M�ngelhaftung richtet sich nach der Regelung "Gew�hrleistung" in unseren Allgemeinen Gesch�ftsbedingungen (Teil I).

letzte Aktualisierung: 23.10.2019

Shipping rates from Germany to U.S.A.

Shipping rates from Germany to U.S.A.
Order quantity	26 to 60 business days	26 to 60 business days
First item	� 41.78	� 41.78

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.

Detailed Seller Information