Mass Spectrometry
Johnstone, R. A. W.
New - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketReflecting the growing volume of published work in this field, researchers will find this book an invaluable source of information on current methods and applications.KlappentextrnrnReflecting the growing volume of published work in this fie.
Seller Inventory # 595095652
Reflecting the growing volume of published work in this field, researchers will find this book an invaluable source of information on current methods and applications.
Chapter 1 Ionization Processes and Ion Dynamics By I. Powis,
Chapter 2 Structures and Dynamics of Gas-phase Ions - A Theoretical Approach By J. C. Lorquet,
Chapter 3 Ion/Molecular Beams Chemistry By S. A. Safron,
Chapter 4 Structures and Reactions of Gas-phase Organic Ions By T. Howe,
Chapter 5 Reactions of Negative Ions in the Gas Phase By J. H. Bowie,
Chapter 6 Developments and Trends in Instrumentation By T. R. Kemp,
Chapter 7 Gas Chromatography-Mass Spectrometry and High-performance Liquid Chromatography-Mass Spectrometry By M. E. Rose,
Chapter 8 The Use of Mass Spectrometry in Pharmacokinetic and Drug-metabolism Studies By D. J. Harvey,
Chapter 9 Natural Products By D. E. Games,
Chapter 10 Organometallic, Co-ordination, and Inorganic Compounds Investigated by Mass Spectrometry By R. H. Cragg,
Ionization Processes and Ion Dynamics
BY I. POWIS
1 Introduction
Compared with previous volumes in the series this first chapter will be found to exclude coverage of simple determinations of thermochemical quantities. Nevertheless the field to be surveyed remains broad with many new developments, and the necessity for selective reporting remains. In choosing material, I have been guided by the desire to present work that advances our understanding of the fundamental processes experienced by ionized molecules.
2 Ionization Processes
Photoionization.- Methods for the calculation of molecular photoionization cross-sections are being actively developed and evaluated. The partial-channel cross-section for ionization to a given final state is given by equation (1) where [??] is the dipole-moment operator, ω the photon frequency, and Ψi and Ψf the initial-state and final-state (ion plus electron) wavefunctions. The function Ψi may be evaluated with the Born-Oppenheimer approximation by means of standard computational methodology; usually ab initio single-configuration functions are used, although semi-empirical and correlated initial-state functions have also been employed. The principal difficulties lie in constructing the final-state wavefunction, Ψf, which can be treated as the product of a bound ionic core and a continuum orbital for the ejected electron. A 'frozen-core' approximation may be invoked and the initial-state orbitals used to generate the ionic hole-state. In view of Koopman's theorem this is acceptable, at least for the outer-valence-shell ionizations. It is the treatment of the continuum function that serves to characterize most usefully the various calculational schemes. Early approaches made use of plane waves (with or without orthogonalization to the remaining orbitals), coulomb waves, and single-centre pseudo-potential methods.
The continuum orbital may in principle be obtained as a solution to the Schrödinger equation (2) where ε is the electron kinetic energy and V2-1 is the static-exchange potential of the N-1 orbitals in the ion core. In general, the non-central nature of the static-exchange potential makes the solution of equation (2) difficult, but single-centre expansion techniques applicable to diatomic and linear polyatomic species such as HCl, HF, N2, O2 and CO2 have been described. The main problem is to ensure convergence in the calculations, but the use of the Schwinger variational method in particular seems to be well behaved and to provide solutions of Hartree-Fock accuracy. Single-centre expansions with a simpler static potential approximation have also been employed.
A more tractable and generally applicable method involves replacing the non-local static-exchange potential with localized model potentials; typically the Xα local-exchange scheme is used in which a parameterized, statistically averaged exchange term, based upon the electron density, is used in the Hamiltonian. Several local-exchange schemes have been compared against static-exchange calculations for atomic photionization and found to be fairly accurate, result that is also said to be relevant to molecular systems. In the multiple-scattering method (MSM) for molecules, the non-central potential is partitioned into spherical regions and localized model potentials, the so-called muffin tin potential, employed for each region. Photoionization cross-sections are then readily calculated. Although less accurate than single-centre expansion techniques, MSM calculations may be applied routinely to polyatomics such as BF3, H2O, and H2S. The general reliability of such calculations appears to be fairly good, although in a comparison with experimental results for CS2 and COS it has been noted that the results for the polar COS molecule and the inner-valence orbitals of CS2 are less good than for the outer-valence orbitals.
In solving equation (1), either a length or velocity form of the dipole operator may be used; when ψi and ψf are exact eigenfunctions of the electronic Hamiltonian these are entirely equivalent, but when only approximate wavefunctions are available different results are obtained. It has been proposed that the discrepancy between the two forms of the calculation may be used as an indication of the quality of the approximations being used. Thiel has compared the use of both forms with MSM calculations for a number of diatomics and concludes that the dipole-length form is to be preferred. This result has since been adopted for MSM calculations of HCN photoionization.
A third major category of calculations is available that avoids the use of model potentials and yet circumvents the problems associated with obtaining a continuum wave in a non-central non-local molecular-ion potential. In this approach the system Hamiltonian is diagonalized over a very large basis set of both compact and diffuse functions. The bound-state, so-called improved virtual orbitals (IVO) that result are used to generate a pseudo-spectrum of discrete transitions. The photoionization cross-section may then be obtained by smoothing the pseudo-spectrum oscillator strengths using Stieltjes-Tchebycheff moment theory (STMT). The virtual orbitals in this STMT approach are usually computed at the Hartree-Fock level by the use of a static-exchange Hamiltonian. As such, the calculations are potentially more accurate than the MSM method but have the drawback that, since the continuum wavefunction is never generated, information on angular distributions and so on can not be obtained. Like MSM, this method can be applied to non-linear polyatomics such as H2O.
Explicit comparisons of the Schwinger single-centre expansion method with both MSM and STMT calculations have been made by Lucchese et al. Their results suggest that STMT calculations may depend critically on there being an appropriate distribution of bound virtual orbitals in order to avoid oversmoothing of the oscillator-strength distribution with a consequent loss or distortion of detailed structure in the photoionization cross-section. Implicit comparisons of these methods are also contained in the many results discussed below. To summarize the present position, it seems that for the most accurate calculations single-centre expansion techniques are preferred, where such methods are applicable. Otherwise, STMT calculations can provide detailed quantitative cross-sections. MSM calculations generate semi-quantitative cross-sections, are widely applicable, and, unlike STMT, can be used to investigate angular distributions and so on.
Much interest focuses on the ability of calculations to predict shape resonances in photoionization. A shape resonance arises when the outgoing electron is excited to a quasi-bound electronic state supported by a centrifugal barrier generated by the electron's angular momentum. It is a purely one-electron phenomenon and should be reproducible by the above calculations. Methods for the graphical representation of the continuum electron waves have been developed. Figure 1 shows the f (l = 3) partial-wave component of the σu channel in the [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] ionization at the resonant energy. The f-like nature is evident from the nodal structure. Significantly, there is a dramatic increase in electronic amplitude near the nuclei, which gives the enhanced ionization probability. This also means that the resonance is very sensitive to the internuclear separation, R, and can result in non-Franck-Condon vibrational distributions. Anisotropic effects arise because the resonances occur in specific channels, i.e. for a continuum orbital of given symmetry. Consequently, when a given symmetry channel is preferentially enhanced by resonance, one expects to see this reflected in the photoelectron angular distribution. Recently, Poliakoff et al. demonstrated that the degree of polarization of the photoionized B2Σ+uN2+ fluorescence also reflects contributions from different ionization channels and so will be sensitive to shape resonances. Finally, shape resonances may be of value in achieving specific molecular-orientation effects in photoionization processes, e.g. of absorbed molecules.
Experimental photoelectron asymmetry parameters, β, have been measured for a range of small molecules of interest in the theory of photoionization, including H2O and H2S. Possibly the most dramatic example of a shape resonance is found in the ionization of C2Σ+gCO2+, where the experimentally determined β parameter dips sharply at around 42 eV. STMT calculations predict such a resonance in the σu channel, but at a photon energy of around 35 eV, whereas Schwinger variational calculations of the photoionization cross-section do place the resonance at ~42 eV. MSM-Xα calculations are also found to be broadly in agreement with experiment and to predict resonances for the first four ionic states. However, the C-state β dip is predicted to be too narrow and too deep. This may be a vibrational effect as the discrepancy with R-averaged calculations is less marked. Vibrationally resolved measurements of the A2Πu ionization show that g decreases with increasing vibrational quantum number, again in accordance with calculations.
Vibrationally resolved photoelectron angular distributions have been reported for X2Σ+uN2+. In those regions that are free of autoionization β(υ = 1) is found to be 0.4 - 0.8 units greater than β(υ = 0), a phenomenon that can be interpreted in terms of shape resonance. Although Grimm has suggested that, for the υ = 2 level, autoionization may contribute to the variations of β, the shape resonances have been widely studied. Raseev et al. and Lucchese have performed single-centre, frozen-core, static-exchange calculations for σ-1g ionization via σu and πu channels that indicate a σu-channel shape resonance. Using the Schwinger variational method, Lucchese has further improved and extended these calculations and claims considerably better results than are achieved with MSM or STMT methods. One feature of the Schwinger calculation is that correlation was considered in the initial-state wavefunction. The STMT method has been extended to allow for coupling of the continuum states by replacing the separated-channel, static-exchange calculation of virtual orbitals with the time-dependent Hartree-Fock (RPAE) approximation. The theoretical treatment of inner-shell ionizations has been tackled for N2 (and CO) by the use of c.i. calculations of ionic hole-states in the static-exchange approximation. Very similar behaviour, displaying a o-channel resonance, is found for the ionization of X2Σ+CO+.
Gustafsson has reported cross-sections for O2 ionization in the 20 - 45 eV region. The b,B4,2Σ-g states in particular show evidence of resonances, the former at around 21 eV. However, a higher-resolution study claims that the resonance structure lies at ~19 eV, and vibrational branching ratios also indicate some sort of resonance at this energy. The 19 eV structure is only 0.4 eV wide, unusually narrow for a shape resonance but rather broad for an autoionization resonance. Various calculations predict a shape resonance in the σu channel, but at around 21 eV photon energies, and the exact nature of the σ-1g ionization remains uncertain. The ionization of both X3Σ-g and a 1Δg neutral O2 to the 2Πg ionic state has been treated in different calculations using an orthogonalized coulomb-wave continuum function.
Like O2, NO is an open-shell molecule whose ionization is perhaps less well understood than that of N2 and CO. Both MSM and STMT calculations have been performed for these ionizations with only moderate agreement with experimental data; in particular, the exact position of the σ-channel resonance for the ionization to c3Π is uncertain.
Of prime importance in the development of our understanding of ionization processes is the system represented in equation (3).
Measurements of the overall photoelectron angular distribution over a wide range of photon energies produced β values of around 1.7, somewhat lower than predicted by many previous calculations. However, it is known that asymmetry parameters for those ionizations in which the rotational angular momentum, N', changes by 2 units are very different from those transitions in which ΔN = 0 and are much more sensitive to the details of calculation. Pollard et al. have measured IβΔN = 2 values for υ' = 0 from rotationally resolved photoelectron spectra, and they compared their results with the theoretical values of Itikawa (see the Table). Unlike most previous calculations, these allow for the inclusion of l = 1 and l = 3 waves for the outgoing electron, and this clearly produces better agreement at 584 Å. The converse may seem to be true at 736 Å, although the discrepancies might be attributable to autoionization effects at this wavelength. Jungen and co-workers have performed calculations that allow for autoionization with the results included in the Table. So far these calculations only treat a pure p-electron wave (l = 1). Clearly more work is needed to understand results of this type.
The work of Jungen is part of a general development of multi-channel quantum defect theory (MQDT) to treat the phenomenon of vibrational and/or rotational autoionization in the hydrogen molecule. The initial application was to autoionization of rotationally cold para-hydrogen (J'' = 0) just above the υ' = 0, N' = 0 ionization threshold, and excellent agreement with experimental data was claimed. Subsequently, vibrational autoionization in the 790 - 760 Å region has been investigated.
Other developments of MQDT have been reported, but our general level of understanding of autoionization phenomena in molecules other than hydrogen remains on a much less quantitative basis. Eland has discussed the position regarding electronic autoionization in a review-type article. A number of papers have reported and assigned Rydberg series in the autoionization structure of SO2, NO, and acetonitrile, and examples of autoionization in the production of various electronic states of O2+ have appeared.
The question of how autoionization affects vibrational-level populations in ions has been tackled by determining branching ratios at photon wavelengths corresponding to autoionizing resonances in N2 and O2. The Fano configuration interaction theory of the Rydberg-continuum coupling can be extended to provide detailed branching ratios in the region of a resonance, with information on the coupling being derived from the autoionization peak shapes, although at the peak of a resonance a simplified equation is applicable. The full theory has yet to be evaluated fully. In studies of N2O and CS2 Eland notes that the influence of autoionization on the vibrational branching may be observed well outside the resonance peak.
Excerpted from Mass Spectrometry Volume 7 by R. A. W. Johnstone. Copyright © 1984 The Royal Society of Chemistry. Excerpted by permission of The Royal Society of Chemistry.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
In order to exercise your revocation right, you must inform us (Moluna GmbH, Münsterstr. 105, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.
The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
To Moluna GmbH, Engberdingdamm 27, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date
(*) Cross out the incorrect option.
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 26 to 60 business days | 26 to 60 business days |
|---|---|---|
| First item | £ 42.43 | £ 42.43 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.