Machining Cost in Conventional and Hot Machining: Comparison and Modeling | Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling
Mohamed Elhadie (u. a.)
ISBN 10: 3844317031 ISBN 13: 9783844317039
Published by LAP LAMBERT Academic Publishing, 2011
New
Taschenbuch
From
preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
AbeBooks Seller since 5 August 2024
This specific item is no longer available.
About this Item
Description:
Machining Cost in Conventional and Hot Machining: Comparison and Modeling | Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling | Mohamed Elhadie (u. a.) | Taschenbuch | 144 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783844317039 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 106760520
Synopsis:
Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive –besides being better in the context of machinability–. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students.
About the Author: Mohamed Elhadie, with masters degree in manufacturingengineering, from the International Islamic University Malaysia(IIUM), 2011. A.N. Mustafizul Karim, an associate professor in the departmentof manufacturing and materials engineering, IIUM. A.K.M. Nurul Amin, a professor in the department of manufacturingand materials engineering, IIUM.
"About this title" may belong to another edition of this title.
Bibliographic Details
Title: Machining Cost in Conventional and Hot ...
Publisher: LAP LAMBERT Academic Publishing
Publication Date: 2011
Binding: Taschenbuch
Condition: Neu
Top Search Results from the AbeBooks Marketplace
Seller Image
Machining Cost in Conventional and Hot Machining: Comparison and Modeling
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844317031
ISBN 13: 9783844317039
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Elhadie MohamedMohamed Elhadie, with masters degree in manufacturingengineering, from the International Islamic University Malaysia(IIUM), 2011. A.N. Mustafizul Karim, an associate professor in the departmentof manufacturing and mate. Seller Inventory # 5472159
Buy New
£ 43.12
£ 42.28 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Machining Cost in Conventional and Hot Machining: Comparison and Modeling | Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844317031
ISBN 13: 9783844317039
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Machining Cost in Conventional and Hot Machining: Comparison and Modeling | Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling | Mohamed Elhadie (u. a.) | Taschenbuch | 144 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783844317039 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 106760520
Seller Image
Machining Cost in Conventional and Hot Machining: Comparison and Modeling
Published by
LAP LAMBERT Academic Publishing Feb 2011, 2011
ISBN 10: 3844317031
ISBN 13: 9783844317039
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive besides being better in the context of machinability . In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. 144 pp. Englisch. Seller Inventory # 9783844317039
Seller Image
Machining Cost in Conventional and Hot Machining: Comparison and Modeling : Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844317031
ISBN 13: 9783844317039
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive besides being better in the context of machinability . In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students. Seller Inventory # 9783844317039
Seller Image
Machining Cost in Conventional and Hot Machining: Comparison and Modeling
Published by
LAP LAMBERT Academic Publishing Feb 2011, 2011
ISBN 10: 3844317031
ISBN 13: 9783844317039
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Preheated (hot) machining was found to enhance the machinability of the AISI D2 tool steel, for instance, longer tool life and lower surface roughness were obtained. For preheated machining (PHM) to be more preferred than room temperature machining (RTM), it has to be economically more attractive -besides being better in the context of machinability-. In this research, a thorough investigation was conducted to determine the conditions under which; PHM would yield lower machining cost. The conditions under which; RTM would yield lower machining cost were determined as well. User-friendly and accurate mathematical models to estimate the cost of machining in terms of the machining parameters were developed. This research work is particularly useful for metal cutting industries, as well as industrial engineering students.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 144 pp. Englisch. Seller Inventory # 9783844317039
Stock Image
Machining Cost in Conventional and Hot Machining: Comparison and Modeling: Machining Cost in Room Temperature and Preheated End-Milling Of AISI D2 Tool Steel: Comparison and Modeling
Published by
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844317031
ISBN 13: 9783844317039
Used
Paperback
Seller: Mispah books, Redhill, SURRE, United Kingdom
Seller rating 4 out of 5 stars
Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Seller Inventory # ERICA75838443170316
Buy Used
£ 116
£ 25 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available