Machine Learning Support for Fault Diagnosis of System-on-Chip
Language: English
Published by Springer, 2024
- Softcover
- New

Seller: preigu, Osnabrück, Germanypreigu
AbeBooks seller since August 5, 2024
Condition: New
£ 52.40
Quantity: 5 available
Add to basketItem description from seller
Machine Learning Support for Fault Diagnosis of System-on-Chip | Patrick Girard (u. a.) | Taschenbuch | xi | Englisch | 2024 | Springer | EAN 9783031196416 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Seller Inventory # 128637174
- Title
- Machine Learning Support for Fault Diagnosis of System-on-Chip
- Author
- Patrick Girard (u. a.)
- Publisher
- Springer
- Publication year
- 2024
- Condition
- Neu
- Binding
- Taschenbuch
- Language
- English
- ISBN 10
- 3031196414
- ISBN 13
- 9783031196416
- Item weight
- 499 grams
- Dimensions
- 235 x 155 x 18 mm
- Seller catalogs
- Bücher
This book provides a state-of-the-art guide to Machine Learning (ML)-based techniques that have been shown to be highly efficient for diagnosis of failures in electronic circuits and systems. The methods discussed can be used for volume diagnosis after manufacturing or for diagnosis of customer returns. Readers will be enabled to deal with huge amount of insightful test data that cannot be exploited otherwise in an efficient, timely manner. After some background on fault diagnosis and machine learning, the authors explain and apply optimized techniques from the ML domain to solve the fault diagnosis problem in the realm of electronic system design and manufacturing. These techniques can be used for failure isolation in logic or analog circuits, board-level fault diagnosis, or even wafer-level failure cluster identification. Evaluation metrics as well as industrial case studies are used to emphasize the usefulness and benefits of using ML-based diagnosis techniques.
"Synopsis" may belong to another edition of this title.
About the Author
Patrick GIRARD received a M.Sc. degree in Electrical Engineering and a Ph.D. degree in Microelectronics from the University of Montpellier, France, in 1988 and 1992 respectively. He also received the “Habilitation à Diriger des Recherches” degree from the University of Montpellier, France, in 2003. He is currently Research Director at CNRS (French National Center for Scientific Research) and works in the Microelectronics Department of the Laboratory of Informatics, Robotics and Microelectronics of Montpellier (LIRMM) - France.
Patrick Girard is Coordinator of the International Research Project « INSIMIA » (French-Italian Research Program on the Integrity of Integrated Systems in the Era of Artificial Intelligence) created in 2021 by the CNRS and the University of Montpellier, France, with the Politecnico di Torino, Italy. Since 2006, he is deputy director of the French scientific network dedicated to research in the fields of System-on-Chip, Embedded Systems and Connected Objects(SOC2), a network composed of 1400 researchers. From 2010 to 2014, he was Director of the Microelectronics Department at LIRMM, at that time composed of about 100 people. His research interests include all aspects of digital and memory circuit test and reliability, with emphasis on critical constraints such as timing and power. Robust design of neuromorphic circuits, test of approximate circuits, as well as machine learning for fault diagnosis are also part of his new research activities. Patrick Girard is Technical Activities Chair of the Test Technology Technical Council (TTTC) of the IEEE Computer Society. From 2006 to 2010, he was Vice-Chair of the European TTTC (ETTTC) of the IEEE Computer Society. He has served on numerous conference committees including ACM/IEEE Design Automation Conference (DAC), ACM/IEEE Design Automation and Test in Europe (DATE), IEEE International Test Conference (ITC), IEEE VLSI Test Symposium (VTS), IEEE European Test Symposium (ETS), IEEE Asian Test Symposium (ATS), IEEE Computer Society Annual Symposium on VLSI (ISVLSI), and IEEE International NEWCAS Conference.Patrick Girard was the founder and Editor-in-Chief of the ASP Journal of Low Power Electronics (JOLPE). He is an Associate Editor of the IEEE Transactions on Emerging Topics in Computing, the IEEE Transactions on Circuits and Systems I: Regular Papers, the IEEE Transactions on Circuits and Systems II: Express Briefs, and the Journal of Electronic Testing (JETTA - Springer). He was formerly an Associate Editor of the IEEE Transactions on VLSI Systems, IEEE Transactions on Computers, and IEEE Transactions on Computer-Aided Design of Circuits and Systems.
Patrick Girard has been involved in several (34) European research projects (ESPRIT III ATSEC, EUREKA MEDEA, MEDEA+ ASSOCIATE, IST MARLOW, MEDEA+ NanoTEST, CATRENE TOETS, ENIAC ELESIS, CATRENE MASTER_3D, PENTA HADES), national research projects (ANR, FUI), and industrial research projects with major companies like Infineon Technologies, Intel, Atmel, ST-Ericsson, STMicroelectronics, etc.
Patrick Girard has supervised 44 PhD dissertations, and has published 12 books or book chapters, 90 journal papers, and more than 250 conference and symposium papers. He is co-author of 5 patents. He is a Fellow of the IEEE and a Golden Core Member of the IEEE Computer Society.
Shawn Blanton is Joseph F. and Nancy Keithley Professor of Electrical and Computer Engineering at Carnegie Mellon University. In 1995 he received his Ph.D. in Electrical Engineering and Computer Science from the University of Michigan, Ann Arbor. His personal research interests include various aspects of integrated system testing and diagnosis, and the development of design methodologiesand tools for securing hardware systems. He has consulted for various companies, and is the founder of TestWorks, a Carnegie Mellon University spinout focused on information extraction from IC test data. He received a Career Award from the National Science Foundation in 1997, and IBM Faculty Partnership Awards in 2005 and 2006. He has given over 100 invited talks at universities and companies and is the recipient of several best-paper awards. He has published nearly 200 refereed conference and journal papers and has 10 U.S. patents or patent applications filed. He has served on various technical program committees and chaired the 2011 program for the International Test Conference. Dr. Blanton is a fellow of the IEEE and senior member of the ACM.
Dr. Blanton has served as the Interim Vice Provost for Diversity, Equity, and Inclusion for Carnegie Mellon University 2020-21. In this interim role, he focused on diversifyingthe graduate student and faculty populations across the university, along with enhancing and initiating win-win relationships with the Pittsburgh region. He also served as the Acting Associate Dean for Diversity and Inclusion for the College of Engineering from 2019 to 2020. In this role, he was responsible for developing and executing a DEI strategic plan for the college. Dr. Blanton currently serves as the Associate Head of Research and is responsible for developing and executing department research strategies.
Blanton is also significantly involved in the recruitment of underrepresented candidates for graduate school. Most of his activities center on direct recruitment at the annual conventions of various engineering societies that include the National Society of Black Engineers (NSBE), Society of Hispanic Professional Engineers and the American Indian Science and Engineering Society, and he spearheaded the University's efforts for the 2006, 2012 and 2018 NSBE conventions in Pittsburgh. In 2006, Blanton was awarded an Emerald Award for outstanding leadership in recruiting and mentoring minorities for advanced degrees in science and technology, and in 2021 he was awarded the Lifetime Achievement award from the National Society of Black Engineers for exhibiting career technical excellence and leadership in higher education in a career spanning several years.
Li-C. Wang is a professor of the Electrical and Computer Engineering Department at University of California, Santa Barbara (UCSB), USA. He received his PhD in 1996 from the University of Texas at Austin, and was previously with Motorola PowerPC Design Center. He joined UCSB in 2000. In the last two decades, his research focused on investigating how machine learning could be applied in electronic design and test flows. Earlier, his research focused on a variety of topics in Electronic Design Automation and Test, including microprocessor test and verification, statistical timing analysis, defect-oriented testing, and Boolean Satisfiability (SAT) solvers. He received 9 best paper awards and 2 honorable mentioned paper awards from major conferences, including the best paper award from International Test Conference (ITC) 2020 and from VLSI Test Symposium 2016. He is the recipient of the 2010 Technical Excellence Award from Semiconductor Research Corporation (SRC) for his research contributions in data mining for test and validation. He is the recipient of the 2017 TTTC Bob Madge Innovation Award. He is an IEEE fellow. He served as the Program Chair for ITC 2016, and as the General Chair for ITC 2017 and ITC 2018. He helped found the ITC-Asia conference in 2017.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 60 to 60 business days | 60 to 60 business days |
|---|---|---|
| First item | £ 59.95 | £ 59.95 |
Payment methods
- Paypal
Store description
preigu betreibt einen Onlineversandhandel mit über 1 Mio. Produkten in verschiedenen Sortimenten. Das Kernsortiment besteht aus Büchern, Medien und Spielwaren. Ein gelungenes Einkaufserlebnis ist das Ziel einer jeden Bestellung bei preigu, denn der Kunde und seine Zufriedenheit stehen an erster Stelle. preigu setzt daher auf einen kompetenten Kundenservice, funktionierende Prozesse und schnelle Reaktion.
Specialty
Bücher, SpielwarenSeller's business information
preigu GmbH & Co. KG
Lengericher Landstraße 19
Osnabrück, Germany 49078
Terms of sale
About Us
Legal website operator identification:
preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany
Telephone: +49 (0) 541 / 580 72 84
Email: mail@preigu.de
VAT No: DE 455 380 498
AG Osnabrück - HRA 209647
PhG: preigu Verwaltung GmbH
AG Osnabrück - HRB 221793
CEO: Ansas Meyer
We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.
We are a member of the initiative "FairCommerce" since 30.11.2016.
For more information, see: https://www.haendlerbund.de/de/haendlerbund/interessenvertretung/faircommerce
Right of withdrawal
Instructions for revocation
Right of withdrawal for the sale of goods
Revocation right for consumers
(A ‘consumer' is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within 14 days without specifying any reasons.
The revocation period is 14 days with effect from the day,
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
To exercise your right of withdrawal, you must inform us (preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Telephone number: +49 (0) 541 / 580 72 84, E-Mail address: mail@preigu.de) by means of a clear declaration (e.g. a letter sent by post, or an e-mail) of your decision to withdraw from this contract. You can use the attached model withdrawal form for this purpose, which is, however, not mandatory.
You can also exercise your right of withdrawal online by clicking on a button labelled accordingly (such as ‘Withdraw from contract' or similar) on the AbeBooks/ZVAB website. If you use this online function, you will immediately receive a confirmation of receipt on a durable medium (e.g. via email) containing information on the content of the withdrawal notice, as well as the date and time of its receipt.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
-
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
-
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
-
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
-
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts. The revocation right expires prematurely in case of contracts
-
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
-
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
-
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
-
To preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Email address: mail@preigu.de :
-
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service () -
Ordered on ()/ received on ()
-
Name of the consumer(s)
-
Address of the consumer(s)
-
Signature of the consumer(s) (only in case of a notification on paper)
-
Date
(*) Cross out the incorrect option.