Light Metals 1984 Proceedings of the technical sessions sponsored by the TMS Light Metals Committee at the 113th Annual Meeting, Los Angeles . 1984
Published by American Institute of Mining, Metallurgical and Petroleum Engineers, Inc., New York, 1984
- Hardcover
- Used
Seller: Versandantiquariat Funke, Dresden, GermanyVersandantiquariat Funke
AbeBooks seller since April 10, 2023
Condition: Used - Good
£ 39.91
Quantity: 1 available
Add to basketItem description from seller
guter Zustand, Gebrauchs- und Alterungsspuren: ehemaliges Bibliotheksexemplar - Bindung leicht gelockert - Titel mit Stempeln und Notizen - Vorsatz mit weiterem Stempel - Seiten aber sauber und ordentlich 8,5 Seiten Inhaltsverzeichnis, davon 2 hier: - ALUMINUM REDUCTION TECHNOLOGY III - Alternative Processes - TiB2 Coatings Prepared by Plasma Spraying and Electroplating D.W. Townsend and L.G. Boxall - Use of TiB2 Cathode Material Application and Benefits in Coventional VSS Cells L.G. Boxall and A.V. Cooke - Carbon Partition Between carbothermically Reduced Al and Al203-A14c3 Melts L.M. Ruch, A.F. Saavedra, and R.M. Kibby - The Production of Raw Al/Si Alloys from Italian Leucitic Minerals by a Direct carbothermic Process. Experiments and Results on a Pilot Plant M.F. Landi, S. Da. Roit, S. Montesi, and L. Piras - Microscopic Investigation of clay chlorination E.S. Martin and K. Wafers - ALUMINUM REDUCTION TECHNOLOGY IV - Alumina Transportation To Cells I. Stankovich - Crusting Behavior of Smelter Aluminas D.W. Townsend and L.G. Boxall - Aluminum Pechiney Specifications for optimising the Aluminas Used in Sidebreak and Point Feeding Reduction Pots Y. Bertaud and A. Lectard - ALUMINUM REDUCTION TECHNOLOGY V - Modelling and Analysis - Thermal Analysis of Soederberg Pots T. Ohto and T. Matsushima - Investigation of the Dynamic Behavior of Aluminum Pots P. Entner, W. Schmidt-Hatting, Z. Mitrovic, U. Gruber, D. Rufer, and B. Fjørnes - The current Efficiency of a Shorted Anode in a Prebake cell W.W. Hyland - Physical Modelling of Bubble Behaviour and Gas Release from Aluminum Reduction cell Anodes S. Fortin, M. Gerhardt, and A.J. Gesing - Potroom Ventilation System by Segregated Air Layers O. Lid and O. Haugen - ALUMINUM REDUCTION TECHNOLOGY VI - Fundamental Studies - Thermodynamics of Metal oxide Reactions in Hall cells A.J. Becker and D.R. Careatti - Interactions of Gases in Molten Salts: carbon Dioxide and oxygen in cryolite-Alumina Melts H. Numata and J. O'M. Bockris - The Rate Determining Step of Metal Loss in Cryolite-Alumina Melts Z. Qiu and L. Fan - Model calculations of the Electrical conductivity of Cryolite Melts P. Fellner, K. Grjotheim, and K. Kvandc - On the Anode Effect in Industrial Aluminum cells J. Thonstad, F. Nordmo, A.B. HusOy, K.O. Vee, and O.G. Austrheim - Determination of Melting Temperatures and Al - 2 - 0 - 3 - Solubilities for Hall cell Electrolyte Compositions S.S. Lee, K.S. Lei, P. Xu, and J.J. Brown, Jr. - CARBON TECHNOLOGY I - Coker Feedstock charaoteristics and calcined Coke Properties P.J. Rhedey and S.K. Nadkarni - Influence of Maximum Temperature and Heat-Soak Times on the Properties of calcined Coke A.F. Bopp, G.B. Groff, and B.H. Howard - Desulfurization of Petroleum coke N.H. Brandt and R.S. Kapner - New Applications to Upgrade coal Tar Products H. Kremer and S. Cukier - CARBON TECHNOLoGY II - Correlation of Raw Material Properties with Binder Content of HS Soderberg Paste L. Castonguay and S.K. Nadkarni - Temperature Stability of Soderberg Anode Pitch M. Sørlie - Evaluation of Volumetric Anode Mix Formulation D. Belitskus - Anode consumption Test cell P.P. Russell, K.R. Weisbrod, and S.S. Jones - Interrelation Between composition and Properties of coal Tar Pitches and Properties of Anode M.L. Itskov, R.V. Svoboda, V.I. Denisenko, E.A. Kolodin, and G.F. Vedernokov - a. m. o. Buchreihe: A Publication of The Metallurgical Society of AIME, Warrendale, Penn., USA Seitenanzahl: 1749 Seiten mit zahlreichen Bildern Format: ca. 15,5 x 23,5 Leinen Englisch.…
Seller Inventory # 322253
Bibliographic details
- Title
- Light Metals 1984 Proceedings of the technical sessions sponsored by the TMS Light Metals Committee at the 113th Annual Meeting, Los Angeles . 1984
- Author
- J. P. McGeer, Alcan International Ltd., Kingston Laboraties /
- Publisher
- American Institute of Mining, Metallurgical and Petroleum Engineers, Inc., New York
- Publication year
- 1984
- Condition
- guter Zustand
- Dust jacket
- Dust Jacket Included
- Binding
- Hardcover
- Edition
- F.
- Seller catalogs
- Metallurgie Gießerei
Versandantiquariat Funke
Dresden, Germany
AbeBooks seller since April 10, 2023
Shipping rates from Germany to U.S.A.
| Item | 25 to 45 business days | 8 to 14 business days |
|---|---|---|
| First item | £ 47.44 | £ 68.32 |
Payment methods
- Bank Wire Transfer
- Cash
- Check
- Paypal
Store description
Aus Leidenschaft für alte Bücher wurde aus einem Hobby ein kleines, aber feines Versandantiquariat. Über 40.000 handverlesene Bücher und Sammlerstücke wurden in den letzten Jahren bereits verkauft. Das spricht für Qualität. Lassen Sie sich inspirieren und stöbern Sie einfach mal in meinem Sortiment.
Seller's business information
Versandantiquariat Funke
Germany
Right of withdrawal
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to Versandantiquariat Funke, Dresden, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
- The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
- The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.