Unconventional energy sources have gained and will continue to gain an increasing share of energy systems around the world. Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen is already part of today's chemical industry, but as an energy source, its rare advantages can only be obtained with the help of technologies. Currently, the fuel cell is considered the cleanest sustainable energy. With the development of fuel cells, hydrogen-based energy generation becomes a reality.

Hydrogen Fuel Cell Technology for Stationary Applications is an essential publication that focuses on the advantages of hydrogen as a primary energy center and addresses its use in the sustainable future of stationary applications. While highlighting a broad range of topics including cost expectations, production methods, and social impact, this publication explores all aspects of the implementation and dissemination of fuel cell technology in the hope of establishing a sustainable marketplace for it. This book is ideally designed for fuel cell manufacturers, architects, electrical engineers, civil engineers, environmental engineers, advocates, manufacturers, mechanics, researchers, academicians, and students.

About the Authors

Gheorghe Badea hold the title of Emeritus professor and Doctor in Engineering within Technical University of Cluj-Napoca, Romania, Doctor in Engineering of the National Institute of Nuclear Physics of Bucharest, Romania and PhD supervisor in the fundamental field of Engineering Sciences. He has been a dean of the Faculty of Installations within Technical University of Cluj-Napoca and, for over two decades, a member of the Council of Faculties of Civil Engineering and Installations and the Senate of Technical University of Cluj-Napoca, Romania. In addition, he has been a technical expert within the Romanian Council for Research in Higher Education (CNCSIS), as well as a member of the Specialty Commission- Architecture, Urban Planning, and Civil Engineering of the National Council for University Titles, Diploma, Certificates (CNATDCU), Romania. President of the international conference „Modern Science and Energy-SME” from the 1st Edition (1981)- Edition XL (2021), Cluj-Napoca, Romania. Editor-in-Chief of Building Services Engineering Journal, Technical University of Cluj-Napoca, U.T.PRESS Publishing Press, 2011, Cluj-Napoca, Romania. Member in several national and international professional associations: Member of the International Association for Energy Economics (ATEE) -France; Member of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRE) in the USA; Member of the Romanian Electric Installations and Automation Society (SIEAR); Member of the Romanian Society for Atmospheric Protection (SOROPA); Member of the Romanian Water Association (ARA); Founding member of the Romanian Association of Installations Engineers (AIIR) and President of Transylvania Branch; Founding member of the Romanian Association of Construction Entrepreneurs (ARACO); President and Founding Member of the Romanian Association of Pipeline Rehabilitation Technologies, without Drilling (ROSTT); Founding member and vice-president of the Romanian Association for Tritium and Torus Energy (T & T ENERGY); Founding member and vice-president of the Association for Hydrogen Energy in Romania (AEHR). During his academic career, he received numberless acknowledgements for his contributions in the field of engineering: Diploma and Medal - 200 OUTSTANDING PEOPLE OF THE 20 TH CENTURY - International Biographical Center Cambridge, England, 1998; Diploma and medal - 20th century CONSTRUCTOR - from the Romanian Association of Construction Entrepreneurs (ARACO), 2001; Honorary member of the Energy Association of Bordeaux - France; Diploma of Excellence from the Faculty of Installations at the Technical University of Civil Engineering Bucharest, Romania; Diploma of Excellence from the Romanian Water Association (ARA); Diploma of Excellence and Honorary Member of the Romanian Association of Installations Engineers (AIIR); The General Engineering Association of Romania (AGIR) Award for the „2002 Installation Manual” (co-author); Order "Merit for Education" as Officer degree granted by Presidential Decree – Romania.

Dr. Raluca-Andreea Felseghi is Scientific Researcher. The main research direction was the concern related to the implementation of hydrogen fuel cell technologies in practical applications. She is currently involved in teaching activities at the Technical University of Cluj-Napoca, Romania, Department of Mechanical Engineering - Faculty of Automotive, Mechatronics and Mechanical Engineering. At "Ştefan cel Mare" University of Suceava, Romania, she was a member of the research team in a project that aimed to integrate hydrogen energy into the electricity supply systems of electric vehicle charging stations (SMiLE-EV). Her main fields of interest are energy efficiency of buildings, stationary application of renewable energies, fuel cell hydrogen technology, hybrid power generation systems, impact of alternative energies on the environment. She is president of the Scientific, Innovation and Technical Education Commission and member of the Romanian Association of Building Services Engineering - Transylvania Branch, a member of the Romanian Association for Hydrogen Energy and a member of Women in Green Hydrogen community (https://women-in-green-hydrogen.net/raluca-andreea-felseghi/).

Ioan Așchilean graduated from the Technical University of Cluj-Napoca, Faculty of Civil Engineering, Department Installations for Civil Engineering, in 1992. In 1998, he was awarded the post-academic diploma in the field of architectural lighting installations. Starting in 2002, he attended the training program at Doctoral School, within Technical University of Cluj-Napoca and obtained the Doctoral Diploma in a fundamental field: Engineering Sciences, Civil Engineering. During 2004-2007, he has been an associated teaching staff of the Faculty of Civil Engineering and Installations, while during 2007 until 2014 he has been an associated teaching staff of the Faculty of Installations, within Technical University of Cluj-Napoca. Starting in 2018, he holds the academic position of associate professor at the Department of Civil Engineering and Management within the Faculty of Civil Engineering of Technical University, Cluj-Napoca, being habilitated as a doctoral supervisor starting with 2019 in the fundamental field: Engineering Sciences, Civil Engineering. Since 1993, he has been the head engineer responsible for installations at AICI CLUJ SA. Since 2001, he has been the general manager of Grup 4 Instalații SA company and, starting in 2004, he has been the Chairman of the Board of Directors of ACI CLUJ SA Company. Author of numberless scientific papers, published in ISI-indexed journals, and ISI-indexed journals with high impact factor, books, guides, invention patents. Due to the experience and expertise in the fundamental field of engineering sciences- civil engineering- he has been certified as a technical verifier and expert for installation works, technologic equipment and industrial installations, verifier and expert in electric installations and expert in natural gas transport. Currently, he is a vice-president of ARACO (Romanian Association of Construction Entrepreneurs), president of AIIR - Transylvania Branch and member of Hydrogen Association.

"About this title" may belong to another edition of this title.

Store Description

SuperBookDeals.com is your top source for finding new books at the absolute lowest prices, guaranteed ! We offer big discounts - everyday - on millions of titles in virtually any category, from Architecture to Zoology -- and everything in between. Discover great deals and super-savings, on professional books, text book titles, the newest computer guides, or your favorite fiction authors. You'll find it all - at HUGE SAVINGS - at SuperBookDeals. Browse through our complete online product catalog today. Serving customers around the world for years, we help thousands find just the books they're looking for -- at incredibly low, bargain prices.

Visit Seller's Storefront

Seller's business information

Expert Trading Limited
9220 Rumsey Road, Suite 101, Columbia, MD, 21045, U.S.A.

Sale & Shipping Terms

Terms of Sale

Company Name: GreatBookPrices
Legal Entity: Expert Trading, LLC
Address: 6310 Stevens Forest, suite 200, Columbia MD 21046
Email address: CustomerService@SuperBookDeals.com
Phone number: 410-964-0026
consumer complaints can be addressed to address above
Registration #: 52-1713923
Authorized representative: Danielle Hainsey

Right of withdrawal

If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

Information regarding the right of withdrawal

Statutory right to withdraw

You have the right to withdraw from this contract within 14 days without giving any reason.

The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.

To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.

To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.

Effects of withdrawal

If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to GreatBookPrices, Bensenville, Illinois, U.S.A., without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of withdrawal

The right of withdrawal does not apply to:

The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.

Shipping Terms

Our warehouses across the globe are fully operational without substantial delays. We are working hard and continue to overcome the daily challenges presented by COVID-19. We appreciate your understanding.

Internal processing of your order will take about 1-2 business days. Please allow an additional 4-14 business days for Media Mail delivery. We have multiple ship-from locations - MD,IL,NJ,UK,IN,NV,TN & GA

Shipping rates within U.S.A.

Shipping rates within U.S.A.
Order quantity	8 to 14 business days	5 to 14 business days
First item	� 2.01	� 2.01

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.