Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (Idms)
Language: English
Published by Royal Society of Chemistry, 2002
- Softcover
- New

Condition: New
£ 59.83
Quantity: Over 20 available
Add to basketItem description from seller
The aim of this book is to provide a simplified yet robust methodology together with adequate guidance, to enable laboratories wishing to use the technique to obtain reliable data.InhaltsverzeichnisIntroduction The Principles of IDM.
Seller Inventory # 595098151
- Title
- Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (Idms)
- Author
- Bedson, Peter
- Publisher
- Royal Society of Chemistry
- Publication year
- 2002
- Condition
- New
- Binding
- Soft cover
- Language
- English
- ISBN 10
- 0854044183
- ISBN 13
- 9780854044184
"Synopsis" may belong to another edition of this title.
Excerpt. © Reprinted by permission. All rights reserved.
Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (IDMS)
By Chris HarringtonThe Royal Society of Chemistry
All rights reserved.
Contents
1 Introduction,
1.1 Advantages and Disadvantages of IDMS, 2,
2 The Principles of IDMS, 3,
3 Critical Stages and Sources of Error, 4,
3.1 Introduction, 4,
3.2 Sample Preparation, 5,
3.3 Selection of the Isotopic Analogue, 6,
3.4 Addition of the Isotopic Analogue, 6,
3.5 Characterisation of the Isotopic Analogue, 7,
3.6 Blank Correction, 8,
3.7 Instrumental Analysis, 8,
3.8 Calibration Procedures, 10,
3.9 Isotopic Interferences, 12,
3.10 Isotopic Discrimination, 14,
3.11 Aspects of Achieving High Accuracy Measurements, 15,
4 The Structured Approach to IDMS analysis, 17,
4.1 The 'Exact signal matching' Method for Organic IDMS, 17,
4.2 The 'Approximate signal matching' method for Inorganic IDMS, 19,
4.3 A Diagrammatic Overview of Inorganic IDMS, 22,
5 Optimised Spiking for Inorganic IDMS Analysis, 30,
5.1 Introduction, 30,
5.2 Key Parameters, 30,
Annex 1: References and Additional Reading, 35,
References, 35,
Additional Organic IDMS Publications, 36,
Additional Inorganic IDMS Publications, 38,
Annex 2: Glossary of Terms and Abbreviations, 41,
Annex 3: Standard IDMS Equations, 46,
CHAPTER 1
Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectronometry (IDMS)
1 Introduction
The technique of isotope dilution mass spectrometry (IDMS) was initially developed during the 1950s for elemental analysis. With readily available and user-friendly instrumentation, the number of applications for which elemental IDMS was used developed rapidly. IDMS was extended into the field of organic compounds in the 1970s and the range of applications for which isotopically labelled organic compounds are available continues to grow. IDMS applications range from routine survey work, such as residue analysis of dioxins, to use as a reference technique.
In mass spectrometry, unlike spectrophotometric techniques, there is no fixed relationship between the amount, and concentration, of a particular substance and the instrument response. Sensitivity for a particular compound or ion varies with, for example, time and instrumental tune parameters. These variations are in addition to those caused by, for example, sample introduction and chromatography. To achieve even moderately accurate quantification requires the use of an internal standard. An advantage of mass spectrometry lies in its ability to use isotopically enriched analogues (inorganic mass spectrometry) or isotopically labelled analogues (organic mass spectrometry) as internal standards. Indeed, in some instances IDMS is referred to as 'stable isotope internal standardisation'. Provided the isotopic analogue is added to the sample at the very beginning of the analytical method and it comes into equilibrium with the analyte without losses or isotopic fractionation, it enables exact compensation to be made for errors at all stages of the analysis, from sample digestion/preparation through to the final instrumental measurement.
Initially, IDMS of inorganic analytes was most frequently performed using thermal ionisation mass spectrometry (TIMS). More recently, inductively coupled plasma mass spectrometry (ICP-MS) based IDMS has become more prevalent, because it requires much less sample preparation prior to analysis, and can provide results of the required accuracy and precision. The inorganic sections of this guide are concerned only with the use of ICP-MS for high accuracy IDMS measurements. IDMS of organic analytes can equally well be carried out using the full range of sample inlet systems available, such as GC-MS, LC-MS and the newer technique of capillary zone electrophoresis-mass spectrometry (CZE-MS). Tandem mass spectrometers (MS-MS) can also be used. In some instances, however, the inlet system/mass spectrometer type can have an influence on IDMS analysis. The use of a GC split injector, for example, can cause isotopic fractionation.
The advent of compact and economic instrumentation, such as quadrupole and ion trap mass spectrometers, has led to the increasing use of mass spectrometry in the field of analytical chemistry. As a result, IDMS is playing an increasingly important role in trace analysis. This is also due to its greater accuracy than other calibration methods and its ability to compensate for matrix effects. Notwithstanding this, there are several reasons why, in spite of the unrivalled accuracy and precision possible with the IDMS technique, it is not more widely used. In principle, the method is simple and allows for knowledge or control of all the variables that can lead to error. In practice, achieving accurate results requires careful design of the experiment and considerable attention to detail and is hence quite time consuming. Such factors have led to a slow acceptance of the technique. It has become popular, however, in some analytical fields where the sample matrix makes sufficiently accurate quantification difficult, e.g. clinical analysis. A theoretical discussion on the influence of some instrumental parameters on the precision of IDMS measurements has been published.
1.1 Advantages and Disadvantages of IDMS
The use of IDMS has a number of advantages and disadvantages, which the prospective user should consider.
1.1.1 Advantages
Providing the sample is homogeneous and isotopic equilibrium has been reached, the advantages of IDMS include:
1. It is a definitive method because of its precision, accuracy and provision of definable uncertainty values.
2. Once equilibration of the spike and analyte isotopes has been achieved, the total recovery of the analyte is not required, because the determined value is based on measuring the ratio between the analyte and the isotopic analogue (spike).
3. The accuracy of the method is determined by the precision of this ratio measurement.
4. Analyte transformation (e.g. breakdown) during sample preparation (most applicable to organic analysis) is compensated for by use of the isotopic analogue as internal standard.
5. The methodology is less time consuming and can provide greater accuracy than standard additions.
This guide aims to provide a structured approach to the use of IDMS to achieve high accuracy analytical measurements in both organic and inorganic IDMS. The approach outlined in Sections 4 and 5 has the advantage over normal IDMS of:
1. Negating the need to accurately characterise the isotopic analogue in terms of isotopic abundance and concentration (most applicable to inorganic analysis).
2. Providing a logical framework of understanding, which allows the analyst to identify specific problems, related to their application.
3. Providing a lower uncertainty value.
4. Simplifying the equations used for organic analytes.
1.1.2 Disadvantages of IDMS
1. The cost and availability of suitable isotopic materials.
2. The cost of the mass spectrometry instrumentation required.
3. Training of the analyst is of the utmost importance; otherwise less accurate results are often achieved.
4. Isotopic equilibration needs to be shown to have been achieved.
5. Differences in the physical (e.g. solvation) and chemical properties (e.g. pKa value) between the analyte and the isotopic analogue, can affect the ions generated in the mass spectrometer (most applicable to organic analysis).
2 The Principles of IDMS
The underlying principle of IDMS5 is that an isotopically enriched analogue (inorganic MS) or an isotopically labelled analogue (organic MS) of the analyte compound is used as an internal standard in quantification by mass spectrometry. An accurately known amount of the isotopic analogue is added to the sample. The consequent ratio of the amounts of the two isotopes (one resulting from the analyte and the other from the isotopic 'spike') is measured on a portion of the sample using a mass spectrometer, so enabling the analyte concentration to be calculated. In summary the stages are:
1. Characterisation of the isotopic analogue (see Section 3.5) using a traceable natural standard by 'reverse IDMS'. If a certified isotopic analogue is used this information is provided in the certificate. This step applies primarily to inorganic analytes.
2. An accurately known amount of the isotopic analogue is then added to an accurately measured portion of the sample (see Section 3.4). This step is widely referred to as 'spiking' the sample.
3. The mixture is equilibrated for an appropriate time. For inorganic analysis destructive digestion is necessary for solid samples (see Section 3.2.1). With organic analysis sample preparation often involves extraction and purification steps. In some cases a chemical reaction is necessary to free any bound form of the analyte (e.g. conjugates) present in the sample. For analysis by gas chromatography a derivatisation step may be necessary to confer thermal stability to the analyte and spike compounds.
4. An aliquot of the spiked sample is introduced into the mass spectrometer either directly (inorganic MS) or after chromatographic separation from other compounds (organic MS) (see Section 3.7).
5. The ratio of the signal responses for the ions resulting from the mixture of the analyte and isotopic analogue is accurately measured in the spiked sample using a mass spectrometer (see Section 3.8). From this ratio the concentration of analyte is calculated by comparison with the same ratio measured for the same ions in a standard calibration mixture. The calibration mixture contains the spike used in the sample and a certified standard of the analyte.
6. Corrections need to be made for instrumental effects, such as mass bias and detector dead-time (see Section 3.10). Using the signal matching procedures outlined in this guide this can be achieved by running an alternating sequence of standards and samples.
7. Blank analysis is still required when using IDMS because any isotopic contribution to the mixture (from reagents, contamination etc.) will affect the isotopic abundance ratio and ultimately lead to a systematic bias (see Section 3.6).
3 Critical Stages and Sources of Error
3.1 Introduction
IDMS analysis can provide results of great accuracy, but to achieve that accuracy it is necessary to consider the critical stages in the experimental procedure and to understand the potential sources of error. All the general precautions associated with mass spectrometry and trace analysis apply equally well to IDMS based procedures. Issues such as sampling, sample homogeneity, contamination and losses prior to analysis will play their part in influencing the accuracy of the reported result. The purpose of this guide is to highlight the specific points pertinent to the use of IDMS for accurate measurement. Therefore, issues related to sampling etc. will not be directly addressed in this guide. For guidance on general trace analysis the following references may serve as a starting point. A useful summary of critical parameters in ICP-MS instrumentation has been published.
There are a number of critical stages in the IDMS procedure where errors may occur including:
1. Sample preparation
(a) Sample digestion and isotopic equilibration (inorganic analysis)
(b) Extraction, clean up, derivatisation (GC-MS) and isotopic equilibration (organic analysis)
2. Selection of the most appropriate isotopic internal standard (often termed the 'spike' and in this guide generically referred to as the isotopic analogue)
(a) An isotopically enriched analogue (inorganic analysis)
(b) An isotopically labelled analogue (organic analysis)
3. Addition of the isotopic analogue
4. Characterisation of the isotopic analogue
5. Blank correction
6. Instrumental analysis
7. Calibration procedure
8. Calculation of the result
9. Estimation of the uncertainty
There are a number of important sources of error in the IDMS procedure including:
1. Less than complete isotopic equilibration will lead to significant systematic errors 2. Presence of interfering ions
(a) Isobaric and polyatomic interferences (inorganic MS)
(b) Natural analyte ion signal overlap with isotopic analogue ion (organic MS)
3. Isotopic discrimination (mass fractionation, detector dead-time, mass bias)
It should be noted that errors occurring during sub-sampling, addition of the isotopic analogue, sample preparation and isotopic equilibration are not compensated for by the use of isotope dilution analysis. However, these errors can be assessed by analysis of a suitable certified reference material or an 'in-house' prepared standard, analysed alongside the sample.
The critical stages and sources of error summarised above are dealt with in greater detail in the following sections.
3.2 Sample Preparation
With IDMS it is particularly important that full equilibration between the analyte and the isotopic analogue is achieved. This will ensure identical behaviour during the analytical procedure. Sufficient time for equilibration must be allowed but, even so, it is often difficult to ensure that full equilibration has taken place. Particular attention must also be paid, for example, to the chemical forms of the analyte and the isotopic analogue, e.g. oxidation state (inorganic MS), analyte form present (organic MS) etc.
3.2.1 Inorganic IDMS
It is advantageous to add the isotopically enriched analogue at the earliest point of the analysis. For solid samples, there will be a period during the digestion phase when the analyte is in a different form from the added enriched isotope. An example of this is the analysis of trace metals in glass. The natural metal has to be released from its silicate matrix to achieve dissolution. During this period the analyte isotope may behave differently from the added analogue isotope before true equilibration is achieved. Thus, losses due to incomplete dissolution or volatile species generation can result in errors, which are unaccounted for by the IDMS procedure. Also, any contamination during the sample digestion stage will add to the final error in an IDMS analysis (this is easily corrected for by analysis of a suitable blank solution). It is essential to ensure that both isotopes are in the same chemical form. This can be achieved, for example, by an oxidation or reduction step.
3.2.2 Organic IDMS
Analyte extraction, sample clean-up and derivatisation steps may also introduce errors prior to the benefits of the isotopic spike being realised. A good example of this is the analysis of cholesterol in serum using IDMS with GC-MS measurements. Even though the serum can be spiked at an early stage with the isotopically labelled analogue this does not guarantee equilibration. In fact, the natural cholesterol is mainly bound to proteins or other lipid materials. Thus, a saponification step is required before the two forms of cholesterol are equivalent and approach equilibration. Even vigorous shaking of the unspiked sample is to be avoided, as there is evidence that foaming is linked to unwanted conversion of the indigenous cholesterol. However, it is essential that all the natural cholesterol is released, otherwise the subsequent derivatisation step for GC-MS analysis will introduce a bias between the isotopically labelled analogue and the natural form.
3.3 Selection of the Isotopic Analogue
For organic analytes, selection of the isotopically labelled analogue may have an effect on the analysis. If deuterium (D) is labelled onto an OH group, for example, then isotopic exchange may take place. Consequently the isotopic label should be introduced into a stable position of the analogue. To avoid discrimination during the various steps of the analytical procedure the label should not be in a position that affects solvation properties, pKa values or derivatisation kinetics (where applicable). When using chemical ionisation GC-MS or atmospheric pressure chemical ionisation LC-MS, if ion formation differs between the isotopic analogue and the analyte, a significant error could occur.
For inorganic analytes there are usually a limited number of options when selecting an isotopically enriched analogue for use in a given IDMS analysis. Where there is a choice, consideration should be given to possible isobaric or polyatomic interferences during the ICP-MS measurement that might be linked with a particular sample (e.g. cadmium in the presence of tin because of the isobaric interferences at m/z values of 112, 114 and 116).
3.4 Addition of the Isotopic Analogue
In general, to achieve an isotopic ion abundance ratio measurement with the best precision, the ratio of analyte concentration to isotopic analogue concentration should be such as to produce equal ion abundances. The solution for analysis should, therefore, contain similar amounts of the two isotopes. However, if measurements are to be made near the detection limit of the analyte, it is often better to use more isotopic analogue so that this response at least can be measured with greater precision.
This approach may be inappropriate for inorganic IDMS, where other situations may apply. In the case of silver, its two natural isotopes actually exist in proportions close to 1:1 (51.8% and 48.2%). Thus, the optimum spiking regime requires a final concentration ratio of ~1:4 to minimise the propagation of errors. A fuller explanation of this particular issue is given in Section 5.
In the case of organic analytes there may be some circumstances where the isotopic analogue has only a small mass difference from the natural analyte, for example, if only one carbon or hydrogen atom has been labelled. In such cases, where the isotopic analogue has a mass of only (M + 1), the analyte itself may have a significant (M + 1) abundance due to the natural isotopic composition of the analyte (contribution from 13C or 2H in the analyte). Under these circumstances a large addition (say 5 to 1) of the isotopic analogue compared to the analyte will reduce the relative concentration of the natural (M + 1) abundance compared to the (M + 1) abundance arising from the isotopic analogue. This will reduce non-linear effects arising from the natural (M + 1) abundance, and can also be particularly important where the bracketing or single point method of calibration is used (see Section 3.8). The relative molecular mass of the analogue should, wherever possible, be increased by at least three mass units, which should avoid interference of the natural isotopes of the analyte on the isotope being measured for the labelled analogue.
(Continues...)
Excerpted from Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (IDMS) by Chris Harrington. Copyright © 2002 LGC Limited. Excerpted by permission of The Royal Society of Chemistry.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
"About the title" may belong to another edition of this title.
Shipping rates from Germany to U.S.A.
| Item | 26 to 60 business days | 26 to 60 business days |
|---|---|---|
| First item | £ 40.87 | £ 40.87 |
Payment methods
- Bank Wire Transfer
- Check
- Paypal
Store description
Online Handel nur mit Neubüchern
Seller's business information
Moluna GmbH
Engberdingdamm 27
Greven, Germany 48268
About Us
Legal website operator identification:
Moluna GmbH
Represented by the general manager Helge Blischke
Engberdingdamm 27
48268 Greven
Germany
Telephone: 02571/5698933
Telefax: 02571/5698930
E-Mail: abe@moluna.de
VAT No.: DE296281834
listed in the commercial register of the local court Steinfurt
Commercial register number - Part B of the commercial register - 10553
We are a member of the initiative „FairCommerce“ since 24.07.2015.
For more information, see: www.haendlerbund.de/faircommerce.
Terms of sale
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
In order to exercise your revocation right, you must inform us (Moluna GmbH, Engberdingdamm 27, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.
The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
-
To Moluna GmbH, Münsterstr. 105, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
-
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service () -
Ordered on ()/ received on ()
-
Name of the consumer(s)
-
Address of the consumer(s)
-
Signature of the consumer(s) (only in case of a notification on paper)
-
Date
(*) Cross out the incorrect option.
Standard Business Terms and customer information / data protection declaration
I. Standard business terms
§ 1 Basic provisions
(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (Moluna GmbH) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.
(2) A ‘consumer’ in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities. The term ‘businessman’ refers to every natural person, legal person or legally responsible partnership that concludes a legal transaction in pursuance of his/its independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The subject-matter of the contract is the selling of products .
(2) If an article is placed by us with AbeBooks or ZVAB, the activation of the page on AbeBooks or ZVAB shall involve the binding offer to conclude a contract under the terms and conditions contained in the article page.
(3) The contract shall become effective via the online shopping cart system as follows:
The products intended for purchase are moved to the "shopping cart". You can select the "Shopping Cart" using the appropriate buttons on the navigation bar and make changes there at any time.
After calling up the “Checkout” page and entering the required personal data and payment and shipping conditions, all order information is then displayed again on the order summary page.
Before submitting the order, you have the ability once more to review or change any information here (you may also use the "back" button on the Internet browser), or to cancel the purchase.
By clicking the “Buy now” button to submit the order, you declare your legally binding acceptance of the order which makes the contract effective.
(4) The execution of the order and the sending of all the details necessitated by the conclusion of the contract take place via e-mail, in a partially-automated manner. Consequently, you have to ensure that the e-mail address that you have deposited with us is the correct one, and that the receipt of the respective e-mails is guaranteed. In particular, you have to ensure that the respective e-mails are not blocked by a SPAM filter.
§ 3 Right of retention, reservation of proprietary rights
(1) You can only exercise a right of retention if the situation in question involves claims arising from the same contractual relationship.
(2) The goods remain our property until the purchase price is paid in full.
(3) If you are a businessman, the following conditions also apply:
a) We retain ownership of the goods until all the claims arising from the ongoing business relationship have been settled in full. The goods subject to retention of title may not be pledged or transferred by way of security before ownership of the said goods changes hands.
b) You can re-sell the goods within the framework of an orderly transaction. In this regard, you hereby cede all the claims amounting to the magnitude of the billing amount that accrue to you as a result of the re-selling operation to us, and we accept the cession. Furthermore, you are authorised to collect the claim in question. However, insofar as you do not discharge your payment obligations in an orderly fashion, we reserve the right to collect the claim ourselves.
c) In a situation involving the combination and amalgamation of the goods subject to retention of title, we acquire co-ownership of the newly-formed item. This co-ownership corresponds to the ratio that exists between the invoice value of the goods subject to retention of title and the other processed items at the time of processing.
d) If you make a request of this nature, we shall be obligated to release the securities that are due to us, to the extent that the realisable value of our securities exceeds the claim to be secured by more than 10%. We are responsible for selecting the securities to be released.
§ 4 Warranty
(1) The statutory warranty rights are applicable.
(2) As a consumer, you are requested to promptly check the product for completeness, visible defects and transport damage as soon as it is delivered, and promptly disclose your complaints to us and the shipping company in writing. Even if you do not comply with this request, it shall have no effect on your legal warranty claims.
(3) If a characteristic of the goods deviates from the objective requirements, the deviation shall only be deemed to be agreed if you were informed of the same by us before submitting the contractual declaration and the deviation was expressly and separately agreed between the contracting parties.
(4)
Insofar as you are an entrepreneur, the following shall apply in deviation from the above warranty provisions:
a) Only our own specifications and the manufacturer's product description shall be deemed agreed as the quality of the goods, but not other advertising, public promotions and statements by the manufacturer.
b) In the event of defects, we shall, at our discretion, provide warranty by rectification of the defect or subsequent delivery. If the rectification of defects fails, you may, at your option, demand a reduction in price or withdraw from the contract. The rectification of defects shall be deemed to have failed after a second unsuccessful attempt, unless the nature of the goods or the defect or other circumstances indicate otherwise. In the event of rectification of defects, we shall not be obliged to bear the increased costs arising from the transport of the goods to a place other than the place of performance, unless such transport is in accordance with the intended use of the goods.
c) The warranty period shall be one year from delivery of the goods. The shortening of the period shall not apply
- for culpable damage attributable to us arising from injury to life, limb or health and for other damage caused intentionally or by gross negligence;
- insofar as we have fraudulently concealed the defect or have assumed a guarantee for the quality of the item;
- in the case of items which have been used for a building in accordance with their customary use and have caused its defectiveness;
- in the case of statutory rights of recourse that you may assert against us in connection with rights arising from defects.
§ 5 Choice of law, place of fulfilment, jurisdiction
(1) German law shall apply. This choice of law only applies to customers if it does not result in the revocation of the protection guaranteed by the mandatory provisions of the law of the country in which the respective customer’s usual place of residence is located (benefit-of-the-doubt principle).
(2) If you are not a consumer, but a businessman, a legal entity under public law or an institutional fund governed by public law, our place of business is the place of jurisdiction as well as the place of fulfilment for all services that follow from the business relationships that exist with us. The same condition applies to situations in which you are not associated with a general place of jurisdiction in Germany or the EU, as well as situations in which the place of residence or the usual place of residence is not known at the time of commencement of proceedings. This has no bearing on the capacity to call upon the court associated with another place of jurisdiction.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods are explicitly inapplicable.
II. Customer information
- Identity of the seller
Moluna GmbH
Engberdingdamm 275
48268 Greven
Germany
Telephone: 02571/5698933
E-Mail: abe@moluna.de
- Information regarding the conclusion of the contract
The technical steps associated with the conclusion of the contract, the contract conclusion itself and the correction options are executed in accordance to the regulations "conclusion of the contract" in our standard business terms (part I.).
- Contractual language, saving the text of the contract
3.1 Contract language shall be English.
3.2 The complete text of the contract is not saved with us. Before the order is sent, the contract data can be printed out or electronically saved using the browser’s print function. After the order is received by us, the order data, the legally-mandated details related to distance selling contracts and the standard business terms are re-sent to you via e-mail.
- Main features of the product or service
The key features of the goods and/or services can be found in the respective quote.
- Prices and payment arrangements
5.1 The prices mentioned in the respective offers represent total prices, as do the shipping costs. They include all the price components, including all the incidental taxes.
5.2 The dispatch costs that are incurred are not included in the purchase price. They can be viewed by clicking the appropriate button on our website or in the respective quote, are shown separately over the course of the order transaction and must additionally be borne by you, insofar as free delivery is not confirmed.
5.3 The payment methods that are available to you are shown by clicking the appropriate button on our website or are disclosed in the respective quote.
5.4 Unless otherwise specified for the respective payment methods, the payment claims arising from the contract that has been concluded become payable immediately.
- Delivery conditions
6.1 The delivery conditions, delivery date and existing supply restrictions, if applicable, can be found by clicking the appropriate button on our website or in the respective quote.
Unless a different period is specified in the item description or our delivery conditions, the goods are delivered within 3-5 days after the conclusion of the contract (in case an advance payment has been agreed upon, after the payment authorisation).
6.2 If you are a consumer, the following is statutorily regulated: The risk of the sold item accidentally being destroyed or degraded during shipping only passes over to you when the item in question is delivered, regardless of whether or not the shipping operation is insured. This condition does not apply if you have independently commissioned a transport company that has not been specified by us or a person who has otherwise been appointed to execute the shipping operation.
If you are a businessman, the delivery and shipping operations take place at your own risk.
- Statutory warranty right
Liability for defects is governed by the “Warranty” provisions in our General Terms and Conditions of Business (Part I).
last update: 01.01.2022
Data protection declaration
Unless stated otherwise below, the provision of your personal data is neither legally nor contractually obligatory, nor required for conclusion of a contract. You are not obliged to provide your data. Not providing it will have no consequences. This only applies as long as the processing procedures below do not state otherwise.
“Personal data” is any information relating to an identified or identifiable natural person.
Responsible person
Contact us at any time. The contact details of the person responsible for data processing can be found in our legal notice.
Collection, processing, and transfer of personal data in orders
When you submit an order we only collect and use your personal data insofar as this is necessary for the fulfilment and handling of your order as well as processing of your queries. The provision of data is necessary for conclusion of a contract. Failure to provide it will prevent the conclusion of any contract. The processing will occur on the basis of Article 6(1) b) GDPR and is required for the fulfilment of a contract with you.
Your data is transferred here for example to the shipping companies and dropshipping providers, payment service providers, service providers for handling the order and IT service providers that you have selected. We will comply strictly with legal requirements in every case. The scope of data transmission is restricted to a minimum.
Duration of storage
After contractual processing has been completed, the data is initially stored for the duration of the warranty period, then in accordance with the retention periods prescribed by law, especially tax and commercial law, and then deleted after the period has elapsed, unless you have agreed to further processing and use.
Rights of the affected person
If the legal requirements are fulfilled, you have the following rights according to art. 15 to 20 GDPR: Right to information, correction, deletion, restriction of processing, data portability. You also have a right of objection against processing based on art. 6 (1) GDPR, and to processing for the purposes of direct marketing, according to art. 21 (1) GDPR.
Right to complain to the regulatory authority
You have the right to complain to the regulatory authority according to art. 77 GDPR if you believe that your data is not being processed legally.
Right to object
If the data processing outlined here is based on our legitimate interests in accordance with Article 6(1)f) GDPR, you have the right for reasons arising from your particular situation to object at any time to the processing of your data with future effect.
If the objection is successful, we will no longer process the personal data, unless we can demonstrate compelling legitimate grounds for the processing that outweigh your interests or rights and freedoms, or the processing is intended for the assertion, exercise or defence of legal claims.
last update: 10.01.2022
Right of withdrawal
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to moluna, Greven, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
- The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
- The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.
Privacy and security
Data protection declaration
Unless stated otherwise below, the provision of your personal data is neither legally nor contractually obligatory, nor required for conclusion of a contract. You are not obliged to provide your data. Not providing it will have no consequences. This only applies as long as the processing procedures below do not state otherwise.
“Personal data” is any information relating to an identified or identifiable natural person.
Responsible person
Contact us at any time. The contact details of the person responsible for data processing can be found in our legal notice.
Collection, processing, and transfer of personal data in orders
When you submit an order we only collect and use your personal data insofar as this is necessary for the fulfilment and handling of your order as well as processing of your queries. The provision of data is necessary for conclusion of a contract. Failure to provide it will prevent the conclusion of any contract. The processing will occur on the basis of Article 6(1) b) GDPR and is required for the fulfilment of a contract with you.
Your data is transferred here for example to the shipping companies and dropshipping providers, payment service providers, service providers for handling the order and IT service providers that you have selected. We will comply strictly with legal requirements in every case. The scope of data transmission is restricted to a minimum.
Duration of storage
After contractual processing has been completed, the data is initially stored for the duration of the warranty period, then in accordance with the retention periods prescribed by law, especially tax and commercial law, and then deleted after the period has elapsed, unless you have agreed to further processing and use.
Rights of the affected person
If the legal requirements are fulfilled, you have the following rights according to art. 15 to 20 GDPR: Right to information, correction, deletion, restriction of processing, data portability. You also have a right of objection against processing based on art. 6 (1) GDPR, and to processing for the purposes of direct marketing, according to art. 21 (1) GDPR.
Right to complain to the regulatory authority
You have the right to complain to the regulatory authority according to art. 77 GDPR if you believe that your data is not being processed legally.
Right to object
If the data processing outlined here is based on our legitimate interests in accordance with Article 6(1)f) GDPR, you have the right for reasons arising from your particular situation to object at any time to the processing of your data with future effect.
If the objection is successful, we will no longer process the personal data, unless we can demonstrate compelling legitimate grounds for the processing that outweigh your interests or rights and freedoms, or the processing is intended for the assertion, exercise or defence of legal claims.
last update: 10.01.2022