It is widely acknowledged that the cost of validation and testing comprises a s- nificant percentage of the overall development costs for electronic systems today, and is expected to escalate sharply in the future. Many studies have shown that up to 70% of the design development time and resources are spent on functional verification. Functional errors manifest themselves very early in the design flow, and unless they are detected up front, they can result in severe consequence- both financially and from a safety viewpoint. Indeed, several recent instances of high-profile functional errors (e. g. , the Pentium FDIV bug) have resulted in - creased attention paid to verifying the functional correctness of designs. Recent efforts have proposed augmenting the traditional RTL simulation-based validation methodology with formal techniques in an attempt to uncover hard-to-find c- ner cases, with the goal of trying to reach RTL functional verification closure. However, what is often not highlighted is the fact that in spite of the tremendous time and effort put into such efforts at the RTL and lower levels of abstraction, the complexity of contemporary embedded systems makes it difficult to guarantee functional correctness at the system level under all possible operational scenarios. The problem is exacerbated in current System-on-Chip (SOC) design meth- ologies that employ Intellectual Property (IP) blocks composed of processor cores, coprocessors, and memory subsystems. Functional verification becomes one of the major bottlenecks in the design of such systems.

From the Back Cover

Validation of programmable architectures, consisting of processor cores, coprocessors, and memory subsystems, is one of the major bottlenecks in current System-on-Chip design methodology. A critical challenge in validation of such systems is the lack of a golden reference model. As a result, many existing validation techniques employ a bottom-up approach to design verification, where the functionality of an existing architecture is, in essence, reverse-engineered from its implementation. Traditional validation techniques employ different reference models depending on the abstraction level and verification task, resulting in potential inconsistencies between multiple reference models.

This book presents a top-down validation methodology that complements the existing bottom-up approaches. It leverages the system architect’s knowledge about the behavior of the design through architecture specification using an Architecture Description Language (ADL). The authors also address two fundamental challenges in functional verification: lack of a golden reference model, and lack of a comprehensive functional coverage metric.

Functional Verification of Programmable Embedded Architectures: A Top-Down Approach is designed for students, researchers, CAD tool developers, designers, and managers interested in the development of tools, techniques and methodologies for system-level design, microprocessor validation, design space exploration and functional verification of embedded systems.

"About this title" may belong to another edition of this title.

Store Description

We sell Brand New University Textbooks to students at very affordable prices. All orders are shipped by Trackable methods only and the tracking number is available within 48 hours of placing the order. We also offer free shipping to USA, Canada and Europe and lowest shipping charges in other countries. We have multiple warehouses to save on the transit time.

Visit Seller's Storefront

Seller's business information

SMASS Group LLC
1944 Loma Linda Dr, Irving, TX, 75063, U.S.A.

Sale & Shipping Terms

Terms of Sale

We sell Brand New Textbooks requied for studies in the Univesity. We have been in this business for the past 14 years and we know how to keep our customers happy and satisfies by providing them the required course material and the most affordable prices.

Right of cancellation

If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

INFORMATION REGARDING THE RIGHT OF CANCELLATION

Statutory Right to cancel

You have the right to cancel this contract within 14 days without giving any reason.

The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.

To exercise the right to cancel, you must inform us, SMASS Sellers, 1944 LOMA LINDA DR., 75063-3924, IRVING, Texas, U.S.A., +1 4699865502, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.

To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.

Effects of cancellation

If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to us or SMASS Sellers, 1944 LOMA LINDA DR., 75063-3924, IRVING, Texas, U.S.A., +1 4699865502, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of cancellation

The right of cancellation does not apply to:

the delivery of newspapers, journals or magazines with the exception of subscription contracts; and
the supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not cancel it once delivery had started.

Model withdrawal form

(complete and return this form only if you wish to withdraw from the contract)

To: (SMASS Sellers, 1944 LOMA LINDA DR., 75063-3924, IRVING, Texas, U.S.A., +1 4699865502)

I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),

Ordered on (*)/received on (*)

Name of consumer(s)

Address of consumer(s)

Signature of consumer(s) (only if this form is notified on paper)

Date

* Delete as appropriate.

Shipping Terms

We ship all orders from our Multiple warehouses by Tracakble method only. We have tie up with Fedex, DHL, UPS and USPS for our logistics requirements. All tracking numbers are available within 48 hours of processing the order.

Shipping rates within U.S.A.

Shipping rates within U.S.A.
Order quantity	5 to 10 business days	3 to 6 business days
First item	� 0.00	� 0.00

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.