Food byproducts derived from industrial processing is a serious worldwide problem because it generates environmental pollution and results in significant food and economic losses from food waste. This new volume shows how food byproducts can be value-added renewable sources with the application of novel biotechnologies that avoid hazardous chemicals.

The volume discusses the importance of valorizing food wastes and illustrates their value-added properties for industry. It explains the significant progress in bioresources processing for compound extraction and production as well as the increasing interest of food ingredients development, in which health care, environment, and economics play an essential part in biotechnological research. It considers the waste byproducts of various crops, such as tomato, melon, maize, berries, soybean, coffee, and their uses in the generation of health-benefiting bioactive compounds. The volume goes on to explore the various biotechnological strategies to extract, produce, and recover bioactive compounds along with the cost-effectiveness of these methods.

Key features:

Describes technological aspects in consolidated processing and bioprocessing of food by-products
Discusses technological aspects in biotechnology for food byproducts treatment and the richness of their biomolecules
Looks at the nutraceutical and health benefit aspects of such biomolecules from food waste byproducts
Provides attractive and sustainable methodologies for bioproduct extraction and recovery for industrial application

This volume, Food Byproducts Management and Their Utilization, presents strategies that are of interest in food engineering, green chemistry, biotechnology, and some other areas, while paying special attention to biorefinery approaches and new challenges that industries are dealing with in the era of sustainable development. It aims to encourage not only researchers but also governmental and enterprise sectors to recognize the value and applications of food byproducts and waste.

About the Author

Ricardo G�mez-Garc�a is a PhD student at the Centre of Biotechnology and Fine Chemistry (CBQF) in the School of Biotechnology at Catholic University of Portugal, Porto, Portugal. He graduated as a chemical engineer from the School of Chemistry at Autonomous University of Coahuila (UA de C), Mexico. He started his scientific career at the Food Research Department at the U A de C, where he developed his expertise in food engineering and technology, food chemistry, and biotechnology. Currently, his PhD work involves developing innovative and sustainable technologies within the context of zero-waste and circular economy approach for the extraction and identification of functional bioactive compounds with industrial interest from fruit by-products for their valorization and reincorporation into the industrial value chains. Mr. G�mez-Garc�a is the author and co-author of 16 articles in indexed journals, and several chapters in books of international circulation. He holds one European provisional patent and a national patent application. He has participated in more than 15 international congresses in areas related with biotechnology, food science and technology, and bioengineering. In addition, he has been participating in several national and international entrepreneurship programs in Portugal and across Europe through the European Institute of Innovation & Technology (EIT Food).

Ana A. Vilas-Boas is a PhD student at the Centre of Biotechnology and Fine Chemistry (CBQF) in the School of Biotechnology at Catholic University of Portugal, Porto, Portugal. Ms. Vilas-Boas holds a BSc in Biotechnology, an MSc in Food Engineering and is currently a PhD student in Biotechnology at the Catholic University of Portugal. She has expertise as a researcher within the framework of diverse national and European projects, such as ESSENCE (2017), FODIAC (2018), Nature Bioactive Food (2020), and MEDISMART (present) project at the Centre for Biotechnology and Fine Chemistry (CBQF) of Catholic University of Portugal. She has been working directly with some Portuguese industries in the context of food by-products and non-compliant food management from food industrial chains to characterize and identify value-added bioactive compounds. Currently, her PhD work involves the development of innovative, integrative, and sustainable processes to valorize orange by-products within the circular economy context for the extraction of hesperidin and pectin to develop a novel nutraceutical to enhance gut microbiota health. She has published 12 articles in indexed journals, several chapters in books, and several international congress communications. In addition, she has participated in entrepreneur programs and was awarded first place in Ecotrophelia Portugal (2018), Innovation Track (2018), and Born from Knowledge-Ideas (2019).

D�bora A. Campos, PhD, is a postdoctoral researcher at the School of Biotechnology at Catholic University of Portugal, Porto, Portugal. Dr. Campos’s scientific work is on waste/by-products valorization from agro-industrial origin, where she is developing innovative and sustainable green technologies for the extraction/separation of compounds of industrial interest. This work allowed her submission and acceptance of a European patent for a new industrial technology application. She has carried out scientific research work in different areas, green nanotechnology, and microbiology. She has been working on several European projects and programs within the framework of entrepreneurism approach, such as LAB2BUSINESS (Porto, 2017), Global Food Venture-EIT Food (2018), and EIT Food Innovator Fellowship (2019). Dr. Campos holds a BSc in Bioscience, a MSc in Applied Microbiology, and a PhD in Biotechnology, all awarded by the Catholic University of Portugal, where she is currently doing postdoctoral work within the MIRACLE-H2020 Eu project (ending in 2022). Finally, Dr. Campos has published 34 scientific articles in international journals and several book chapters. She is a co-advisor of PhD theses. She holds one granted European patent and a national patent. She has participated in scientific European projects and has attended over 25 international congresses in the area of foods and functional ingredients.

Maria Manuela Pintado, PhD, is Director of the Centre of Biotechnology and Fine Chemistry (CBQF) in the School of Biotechnology at the Catholic University of Portugal. As Associate Professor, she works on the interface of microbiology with health. Professor Pintado has developed numerous projects of I & D+I (with companies and scientific institutions, both national and international) in the areas of valuing of by-products and residues, production and characterization of bioactive compounds, functional foods, and natural antimicrobials. Additionally, she has been advisor of 18 PhD theses, 16 postdoctoral fellowships, 36 MSc theses, and 54 BSc theses. She is Pharmaceutic by the University of Portugal; she has an MSc in Food Science and Engineering, and her PhD is in Biotechnology, both earned at the Centre of Biotechnology and Fine Chemistry at her university. Dr. Pintado has published more than 320 papers in indexed journals, 35 book chapters, 34 proceedings, and more than 150 contributions in scientific meetings, and holds 20 patents.

Crist�bal No� Aguilar, PhD, is a Director of Research and Postgraduate Programs at the Universidad Autonoma de Coahuila, Mexico. Dr. Aguilar has published more than 360 papers in indexed journals, and 450 contributions in scientific meetings. He has also edited more than 30 books. He has been awarded several prizes and awards, the most important of which are the National Prize of Research (2010) from the Mexican Academy of Sciences; the Prize CCC-2008 from the Mexican Society of Biotechnology and Bioengineering; National Prize AgroBio-2005; and the Mexican Prize in Food Science and Technology. In 2019 he received the Outstanding Research Award by the International Association of Bioprocessing (IBA). Dr. Aguilar is a member of the Mexican Academy of Science, the Central Council of the International Bioprocessing Association, the Mexican Academy of Sciences, the Mexican Society for Biotechnology and Bioengineering, and the Mexican Association for Food Science and Biotechnology. He has developed more than 41 research projects, including 25 international exchange projects.

"About this title" may belong to another edition of this title.

Store Description

Online Handel nur mit Neub�chern

Visit Seller's Storefront

Seller's business information

Moluna GmbH
Engberdingdamm 27, Greven, 48268, Germany

Sale & Shipping Terms

Terms of Sale

Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration

Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...

More Information

Right of cancellation

Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration

Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,

on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;

In order to exercise your revocation right, you must inform us (Moluna GmbH, M�nsterstr. 105, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.

In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.

Consequences of the revocation

If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.

We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.

You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.

You bear the direct costs for returning the products.

You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.

Criteria for exclusion or expiry

The revocation right is not available for contracts

for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.

The revocation right expires prematurely in case of contracts

for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.

Specimen - revocation form

(If you wish to revoke the contract, please fill up this form and send it back to us.)

To Moluna GmbH, Engberdingdamm 27, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date

(*) Cross out the incorrect option.

Shipping Terms

II. Kundeninformationen

Identit�t des Verk�ufers

Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de

Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.

Informationen zum Zustandekommen des Vertrages

Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturm�glichkeiten erfolgen nach Ma�gabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Gesch�ftsbedingungen (Teil I.).

Vertragssprache, Vertragstextspeicherung

3.1. Vertragssprache ist deutsch .

3.2. Der vollst�ndige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung k�nnen die Vertragsdaten �ber die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzvertr�gen und die Allgemeinen Gesch�ftsbedingungen nochmals per E-Mail an Sie �bersandt.

Wesentliche Merkmale der Ware oder Dienstleistung

Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.

Preise und Zahlungsmodalit�ten

5.1. Die in den jeweiligen Angeboten angef�hrten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschlie�lich aller anfallenden Steuern.

5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind �ber eine entsprechend bezeichnete Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zus�tzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.

5.3. Die Ihnen zur Verf�gung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot ausgewiesen.

5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsanspr�che aus dem geschlossenen Vertrag sofort zur Zahlung f�llig.

Lieferbedingungen

6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschr�nkungen finden sich unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot.

Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfl�che keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).

6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zuf�lligen Untergangs und der zuf�lligen Verschlechterung der verkauften Sache w�hrend der Versendung erst mit der �bergabe der Ware an Sie �bergeht, unabh�ngig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenst�ndig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausf�hrung der Versendung bestimmte Person beauftragt haben.

Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.

Gesetzliches M�ngelhaftungsrecht

Die M�ngelhaftung richtet sich nach der Regelung "Gew�hrleistung" in unseren Allgemeinen Gesch�ftsbedingungen (Teil I).

letzte Aktualisierung: 23.10.2019

Shipping rates from Germany to U.S.A.

Shipping rates from Germany to U.S.A.
Order quantity	16 to 45 business days	16 to 45 business days
First item	� 42.26	� 42.26

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.

Detailed Seller Information