Epoxy-based Spacers for Gas Insulated Power Apparatus
Boxue Du
Sold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
New - Soft cover
Condition: New
Ships from Germany to U.S.A.
Quantity: 1 available
Add to basketSold by AHA-BUCH GmbH, Einbeck, Germany
AbeBooks Seller since 14 August 2006
Condition: New
Quantity: 1 available
Add to basketDruck auf Anfrage Neuware - Printed after ordering - This book offers an insight into the insulation failures in GIS/GIL and provides practical guidance for improving the insulation reliability of epoxy-based spacers. High voltage gas-insulated apparatuses, including gas-insulated switchgears (GIS) and transmission lines (GIL), playing an important role in the global power transmission system. Epoxy-based spacers are key components in GIS/GIL, playing the role of electrical insulation and mechanical support. However, insulation failures frequently occur around the epoxy-based spacers, threatening the safe operation of the electric power system. Three topics make up this book, with seven to nine chapters in each topic. In the first topic, the surface charging and discharging behaviors of epoxy-based spacers are discussed to deepen the readers' understanding on the insulation problems in GIS/GIL. And the insulation breakdown of epoxy-based spacers is found to be closely related to the electric field distortion under complex operating conditions. In the second topic, original researches on the surface functionally graded materials (SFGM) are presented for relaxing the electric field distortion around the epoxy-based spacers in both AC and DC GIS/GIL, and a series of optimization methods and fabrication techniques for the SFGM spacers are introduced and discussed. In the last topic, the nonlinear conductivity materials (NCM), also known as self-adaptive materials or intelligent materials, are applied as coatings to adaptively regulate the electric field distributions along the surfaces of the epoxy-based spacers. Besides, the concept of the multi-dimensional functionally graded materials (MFGM) is proposed to uniform the electric field distributions in DC GIS/GIL under stationary and transient voltages, exhibiting great potential in the future application.
Seller Inventory # 9789811971136
This book offers an insight into the insulation failures in GIS/GIL and provides practical guidance for improving the insulation reliability of epoxy-based spacers. High voltage gas-insulated apparatuses, including gas-insulated switchgears (GIS) and transmission lines (GIL), playing an important role in the global power transmission system. Epoxy-based spacers are key components in GIS/GIL, playing the role of electrical insulation and mechanical support. However, insulation failures frequently occur around the epoxy-based spacers, threatening the safe operation of the electric power system. Three topics make up this book, with seven to nine chapters in each topic. In the first topic, the surface charging and discharging behaviors of epoxy-based spacers are discussed to deepen the readers’ understanding on the insulation problems in GIS/GIL. And the insulation breakdown of epoxy-based spacers is found to be closely related to the electric field distortion under complex operating conditions. In the second topic, original researches on the surface functionally graded materials (SFGM) are presented for relaxing the electric field distortion around the epoxy-based spacers in both AC and DC GIS/GIL, and a series of optimization methods and fabrication techniques for the SFGM spacers are introduced and discussed. In the last topic, the nonlinear conductivity materials (NCM), also known as self-adaptive materials or intelligent materials, are applied as coatings to adaptively regulate the electric field distributions along the surfaces of the epoxy-based spacers. Besides, the concept of the multi-dimensional functionally graded materials (MFGM) is proposed to uniform the electric field distributions in DC GIS/GIL under stationary and transient voltages, exhibiting great potential in the future application.
Boxue Du received the M.E. degree in electrical engineering from Ibaraki University and the Ph.D. degree from Tokyo University of A&T. During 1996 to 2002, he was with The Niigata Institute of Science and Technology, Japan and was an Associate Professor. From 2000 to 2002, he was a Visiting Scientist at Niigata University, Japan. Since 2002 he has been a Professor and Director-founder of the Institute of High Voltage at the School of Electrical and Information Engineering, Tianjin University, China. His research interests are focused on dielectric failure mechanisms of polymer insulating materials, polymer dielectrics for energy storage, electrical insulation technology and application of polymer dielectrics under various extreme environments such as cryogenic, high temperature, high altitude, gamma-ray irradiation and high-intensity magnetic field. He has published 5 books and 25 book chapters in Polymer Dielectrics, and authored about 700 papers and over 210 of them published in IEEE Transactions. He has also served industry and start-ups as a consultant. He is an Editorial Boards Member of High Voltage, Journal of Electronics and Advanced Electrical Engineering, Journal of Modern Power Systems and Clear Energy, Chinese Journal of High Voltage Engineering, Insulation Materials and Electrical Engineering. He is a Fellow of IET, member at several WG in CIGRE and several Standards Committees in IEEE. He is an Associate Editor of IEEE Transactions on Industry Applications, a Subject Editor of IET Nanodielectrics, and was an Associate Editor of IEEE Transactions on Dielectrics and Electrical Insulation and IEEE Access.
"About this title" may belong to another edition of this title.
General Terms and Conditions and Customer Information / Privacy Policy
I. General Terms and Conditions
§ 1 Basic provisions
(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to
(2) A consumer within the meaning of the following regulations is any natural person who concludes...
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to AHA-BUCH GmbH, Einbeck, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.
Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.
| Order quantity | 30 to 40 business days | 7 to 14 business days |
|---|---|---|
| First item | £ 55.84 | £ 64.52 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.