Energy Production, Load and Battery Management Framework with Supporting Methods for Smart Microgrids
New - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketDieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.
Seller Inventory # 2317898422
This open access book provides an overview of the results of a large university collaboration addressing the emerging topic of distributed, localized energy grids and also smart grids. The authors discuss promising, consolidated results from their consortium research activities from the past decade. The methods described achieve unprecedented accuracy levels within reasonable run-times, compatible with on-line monitoring and forecasting as needed for smart grids.
Francky Catthoor received a Ph.D. in EE from the Katholieke Univ. Leuven, Belgium in 1987. Between 1987 and 2000, he has headed several research do- mains in the area of synthesis techniques and archi-tectural methodologies, all at IMEC Leuven, Belgium. Since 2000 he is strongly involved in other activi-ties at IMEC including co-exploration of application, computer architecture and deep submicron technol-ogy aspects, biomedical systems and IoT sensor nodes, and photo-voltaic modules combined with re-newable energy systems. Currently he is an IMEC senior fellow. He is also part-time full professor at the EE department of the KULeuven. He has been associate editor for several IEEE and ACM journals, and was elected IEEE fellow in 2005. After his official retirement from IMEC in Oct’2024, he is now affiliated with the Microlab of NTUAthens in Greece as associated guest professor.
Ittetsu Taniguchi received B.E., M.E., and Ph.D. degrees from Osaka University in 2004, 2006, and 2009, respectively. From 2007 to 2008, he was an international scholar at the Katholieke Universiteit Leuven (IMEC), Belgium. In 2009, he joined the College of Science and Engineering, Ritsumeikan University as an assistant professor and became a lecturer in 2014. In 2017, he joined the Graduate School of Infor-mation Science and Technology, Osaka University as an associate professor. His research interests in-clude system-level design methodology, design methodologies for cyber-physical systems, smart energy management systems, etc. He is a member of IEEE, ACM, IEICE and IPSJ.
Pavlos S. Georgilakis (M’01, SM’11) received the Diploma and Ph.D. degrees in electrical and computer engineering from the National Technical University of Athens (NTUA), Athens, Greece, in 1990 and 2000, respectively. In September 2009, he joined as a faculty member the School of Electrical and Computer Engineering of NTUA, where he is currently a Full Professor. From 2004 to 2009 he was an Assistant Pro-fessor at the School of Production Engineering and Management of the Technical University of Crete, Greece. From 1994 to 2003 he was with Schneider Electric AE, the Greek subsidiary of Schneider Electric, where he worked as quality control engineer, transformer design engineer, research and development manager, and low voltage products marketing manager. His current research interests include optimiza-tion algorithms and computational intelligence techniques for the optimal operation and planning of smart distribution systems. He is a senior member of IEEE and a member of the Technical Chamber of Greece.
Dafang Zhao received M.E and Ph.D. degrees from Nara Institute of Science and Technology and Osaka University in 2019 and 2022. In 2022 he joined the Graduate School of Information Science and Technol-ogy, Osaka University as an assistant professor. His research interests includes nonlinear system, energy storage system and building thermodynamics system modelling, design methodologies for smart build-ing and energy management systems, etc. He is a member of IEEE and ACM.
Dimitrios Soudris received the Diploma and Ph.D. degrees in electrical engineering from the University of Patras, Patras, Greece, in 1987 and 1992, respectively. Since 1995, he has been a Professor with the Department of Electrical and Computer Engineering, Democritus University of Thrace, Xanthi, Greece. He is currently a Professor with the School of Electrical and Computer Engineering, National Technical University of Athens, Athens, Greece. He has authored or coauthored more than 500 papers in interna-tional journals/conferences. He has coauthored/coedited seven Kluwer/Springer books. He is also the leader and a principal investigator in research projects funded by Greek Government and Industry, Euro-pean Commission, ENIAC-JU, and European Space Agency. His current research interests include high performance computing, embedded systems, reconfigurable architectures, reliability, and low-power VLSI design. He was a recipient of the award from INTEL and IBM for EU Project LPGD 25256; ASP-DAC 05 and VLSI 05 awards for EU AMDREL IST-2001-34379, and several HiPEAC awards. He has served as the general/program chair in several conferences.
Kostas Siozios received the Diploma, Master and Ph.D. degrees in Electrical and Computer Engineering from the Democritus University of Thrace, Greece, in 2001, 2003 and 2009, respectively. Currently, he is Associate Professor at Department of Physics, Aristotle University of Thessaloniki. His research interests include Hardware Accelerators, Reconfigurable Architecture, Low-Power Design, Resource Allocation, Computer-Aided Design (CAD) algorithms for physical design and Decision-Making Algorithms. He has published more than 200 papers (in peer-reviewed journals and conferences), with more than 1400 cita-tions according to G&S (h-index=19). He has contributed in 8 books of Kluwer and Springer. The last years he was involved as Project Coordinator, Technical Manager or Principal Investigator in 25 research projects funded from the European Commission (EC), European Space Agency (ESA), as well as the Greek Government and Industry.
Andreas Kazantzidis is professor at the Physics Department of Univ. of Patras, Greece. His main research interests include the transfer of solar radiation through the atmosphere and the estimation of the ef-fects of different atmospheric constituents, such aerosols and clouds. Particular emphasis is given on solar energy model calculations and measurements, as well as on past and future UV changes related to climate change and their effect on human health. The research activities are focused on the extensive use of radiative transfer models in synergy with measurements of radiation, aerosol and cloud proper-ties. Experimental work includes monitoring of shortwave and UV radiation with various instruments, as well as data management and QA/QC procedures.
"About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
In order to exercise your revocation right, you must inform us (Moluna GmbH, Münsterstr. 105, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.
The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
To Moluna GmbH, Engberdingdamm 27, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date
(*) Cross out the incorrect option.
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 16 to 45 business days | 16 to 45 business days |
|---|---|---|
| First item | £ 42.75 | £ 42.75 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.