Embedded Systems Programming with ARM and Zynq (Paperback)
Language: English
Published by Independently Published, 2026
- Softcover
- New
Seller: CitiRetail, Stevenage, United KingdomCitiRetail
AbeBooks seller since June 29, 2022
Condition: New
£ 27.99
Quantity: 1 available
Add to basketItem description from seller
Paperback. In the world of embedded systems, true engineering begins at the point where the system misbehaves. A board that refuses to boot, an unclocked peripheral that deadlocks the central bus fabric, or an unexpected interrupt storm that paralyzes a control loop are the default conditions of low-level development. Most books present embedded programming through abstract software models. This book takes the opposite stance.Embedded Systems Programming with ARM and Zynq is an uncompromising, production-grade guide designed to strip away the abstractions of general-purpose operating systems and hand you absolute, unmediated control over every transistor, bus bridge, and register inside the silicon. Written by expert firmware architect Draven Colex, this volume treats software as a direct physical extension of hardware behavior.Rather than teaching isolated, fragmented peripheral APIs that collapse under real-world stress, this guide systematically builds a unified, high-performance embedded platform from the ground up. You will learn to use a JTAG probe, an integrated logic analyzer, and an oscilloscope as central intellectual tools to make unstable realities visible, predictable, and controllable.What You Will MasterLow-Level Boot Lifecycles: Author raw startup assembly from electrical reset up to a stabilized C execution environment, manually initializing stacks, flushing prefetch buffers, and scrubbing .bss memory segments.Linker Script Blueprinting: Command your spatial memory topology by designing custom linker scripts that separate a program's Load Memory Address (LMA) from its Virtual Execution Address (VMA) across internal OCM and external DDR3 RAM.Deterministic Scheduling: Eliminate the overhead and non-determinism of traditional RTOS kernels by constructing non-blocking, cooperative time-triggered schedulers that track Worst-Case Execution Times (WCET) using raw hardware ticks.Hardened Exception Networks: Program the Generic Interrupt Controller (GIC) at the register level, implementing atomic hardware masks, lock-free ring buffers, and defensive shielding tactics to permanently suppress interrupt storms.Asynchronous Communication: Design zero-stall, interrupt-driven serial drivers (UART) and stream parsers that process live host command frames with sub-microsecond latency.Physical Layer Topologies: Master the electrical coordination of push-pull and open-drain buses, configure Multiplexed I/O (MIO) pad routing, and neutralize parasitic bus capacitance overloads directly within software.The VerdictWhether you are a firmware engineer seeking to break into advanced robotics, aerospace, or automotive systems, or an FPGA developer mastering heterogeneous hardware-software co-design, this book is your competitive edge.Stop writing apps that hide the hardware. Start building rock-solid, time-deterministic systems capable of controlling the physical world with absolute, unflinching reliability. This item is printed on demand. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…
Seller Inventory # 9798180304735
- Title
- Embedded Systems Programming with ARM and Zynq (Paperback)
- Author
- Draven Colex
- Publisher
- Independently Published
- Publication year
- 2026
- Condition
- new
- Binding
- Paperback
- Language
- English
- ISBN 13
- 9798180304735
Embedded Systems Programming with ARM and Zynq is an uncompromising, production-grade guide designed to strip away the abstractions of general-purpose operating systems and hand you absolute, unmediated control over every transistor, bus bridge, and register inside the silicon. Written by expert firmware architect Draven Colex, this volume treats software as a direct physical extension of hardware behavior.
Rather than teaching isolated, fragmented peripheral APIs that collapse under real-world stress, this guide systematically builds a unified, high-performance embedded platform from the ground up. You will learn to use a JTAG probe, an integrated logic analyzer, and an oscilloscope as central intellectual tools to make unstable realities visible, predictable, and controllable.
What You Will Master
- Low-Level Boot Lifecycles: Author raw startup assembly from electrical reset up to a stabilized C execution environment, manually initializing stacks, flushing prefetch buffers, and scrubbing .bss memory segments.
- Linker Script Blueprinting: Command your spatial memory topology by designing custom linker scripts that separate a program's Load Memory Address (LMA) from its Virtual Execution Address (VMA) across internal OCM and external DDR3 RAM.
- Deterministic Scheduling: Eliminate the overhead and non-determinism of traditional RTOS kernels by constructing non-blocking, cooperative time-triggered schedulers that track Worst-Case Execution Times (WCET) using raw hardware ticks.
- Hardened Exception Networks: Program the Generic Interrupt Controller (GIC) at the register level, implementing atomic hardware masks, lock-free ring buffers, and defensive shielding tactics to permanently suppress interrupt storms.
- Asynchronous Communication: Design zero-stall, interrupt-driven serial drivers (UART) and stream parsers that process live host command frames with sub-microsecond latency.
- Physical Layer Topologies: Master the electrical coordination of push-pull and open-drain buses, configure Multiplexed I/O (MIO) pad routing, and neutralize parasitic bus capacitance overloads directly within software.
Whether you are a firmware engineer seeking to break into advanced robotics, aerospace, or automotive systems, or an FPGA developer mastering heterogeneous hardware-software co-design, this book is your competitive edge.
Stop writing apps that hide the hardware. Start building rock-solid, time-deterministic systems capable of controlling the physical world with absolute, unflinching reliability.
"Synopsis" may belong to another edition of this title.
CitiRetail
Stevenage, United Kingdom
AbeBooks seller since June 29, 2022
Shipping rates from United Kingdom to U.S.A.
| Item | 7 to 14 business days | 7 to 60 business days |
|---|---|---|
| First item | £ 37.00 | £ 37.00 |
Payment methods
Store description
Online business
Seller's business information
ABC BOOKS LIMITED
10 John Street
London, United Kingdom WC1N 2EB
Terms of sale
Orders can be returned within 30 days of receipt.
Right of withdrawal
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to CitiRetail, Stevenage, United Kingdom, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
- The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
- The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.
Shipping terms
Please note that titles are dispatched from our US, Canadian or Australian warehouses. Delivery times specified in shipping terms. Orders ship within 2 business days. Delivery to your door then takes 7-14 days.