Electronic Design Automation for Integrated Circuits Handbook
Sold by Biblios, Frankfurt am main, HESSE, Germany
AbeBooks Seller since 10 September 2024
New - Hardcover
Condition: New
Quantity: 1 available
Add to basketSold by Biblios, Frankfurt am main, HESSE, Germany
AbeBooks Seller since 10 September 2024
Condition: New
Quantity: 1 available
Add to basketComprised of two volumes, Electronic Design Automation for Integrated Circuits Handbook, Second Edition addresses all major areas of EDA for integrated circuits (ICs). Chapters contributed by leading experts authoritatively discuss an array of topics ranging from system design to physical implementation.
New to This Edition:
Offering improved depth and modernity, Electronic Design Automation for Integrated Circuits Handbook, Second Edition – Two-Volume Set provides a valuable, state-of-the-art reference for EDA students, researchers, and professionals.
Luciano Lavagno received his PhD in electrical engineering and computer sciences from the University of California, Berkeley, USA (UC Berkeley), in 1992, and from Politecnico di Torino, Italy, in 1993. He is a coauthor of two books on asynchronous circuit design, a book on hardware/software codesign of embedded systems, more than 200 scientific papers, and 12 US patents. Between 1993 and 2000, he was the architect of the POLIS project, a cooperation between UC Berkeley, Cadence Design Systems, Magneti Marelli, and Politecnico di Torino, which developed a complete hardware/software codesign environment for control-dominated embedded systems. Between 2003 and 2014, he was one of the creators and architects of the Cadence C-to-Silicon high-level synthesis system. Since 2011, he has been a full professor with Politecnico di Torino. He has been serving on the technical committees of several international conferences, workshops, and symposia. He has been the technical program chair of the Design Automation Conference, and the technical program committee and general chair of the International Conference on Hardware/Software Codesign and System Synthesis. He has been an associate editor of the Institute of Electrical and Electronics Engineers (IEEE) Transactions on Circuits and Systems and Association for Computing Machinery (ACM) Transactions on Embedded Computing. He is a senior member of the IEEE. His research interests include the synthesis of asynchronous low-power circuits, the concurrent design of mixed hardware and software embedded systems, the high-level synthesis of digital circuits, the design and optimization of hardware components and protocols for wireless sensor networks (WSNs), and design tools for WSNs.
Igor L. Markov is currently on leave from the University of Michigan, Ann Arbor, USA, where he taught for many years. He joined Google in 2014 and occasionally teaches very-large-scale integration design at Stanford University, California, USA. He researches computers that make computers, including algorithms and optimization techniques for electronic design automation, secure hardware, and emerging technologies. He is an Institute of Electrical and Electronics Engineers (IEEE) fellow and an Association for Computing Machinery (ACM) distinguished scientist. He has coauthored five books, and has four U.S. patents and more than 200 refereed publications, some of which were honored by best-paper awards. Professor Markov is a recipient of the Design Automation Conference Fellowship, ACM Special Interest Group on Design Automation Outstanding New Faculty Award, National Science Foundation Faculty Early Career Development Program Award, IBM Partnership Award, Microsoft A. Richard Newton Breakthrough Research Award, and IEEE Council on Electronic Design Automation Early Career Award. During the 2011 redesign of the ACM Computing Classification System, Professor Markov led the effort on the hardware tree. Twelve doctoral dissertations were defended under his supervision; three of which received outstanding dissertation awards.
Grant E. Martin is a distinguished engineer at Cadence Design Systems, Inc., San Jose, California, USA. Before that, Grant worked for Burroughs in Scotland for 6 years; Nortel/Bell-Northern Research in Canada for 10 years; Cadence Design Systems for 9 years, eventually becoming a fellow in their labs; and Tensilica for 9 years. He rejoined Cadence in 2013 when it acquired Tensilica, and has been there since, working in the Tensilica part of the Cadence Intellectual Property Group. He received his bachelor’s and master’s degrees in mathematics (combinatorics and optimization) from the University of Waterloo, Ontario, Canada, in 1977 and 1978. Grant has coauthored and coedited several books, including the first-ever book on system-on-chip (SoC) design published in Russian. He has also presented many papers, talks, and tutorials, and participated in panels at a number of major conferences. He cochaired the VSI Alliance Embedded Systems Study Group in the summer of 2001, and was cochair of the Design Automation Conference Technical Program Committee for Methods for 2005 and 2006. He is also a coeditor of the Springer Embedded Systems series. His particular areas of interest include system-level design, intellectual property-based design of SoC, platform-based design, digital signal processing, baseband and image processing, and embedded software. He is a senior member of the Institute of Electrical and Electronics Engineers.
Louis K. Scheffer received his BS and MS from the California Institute of Technology, Pasadena, USA, in 1974 and 1975, and his PhD from Stanford University, California, USA, in 1984. He worked at Hewlett Packard from 1975 to 1981 as a chip designer and computer-aided design tool developer. In 1981, he joined Valid Logic Systems, where he did hardware design, developed a schematic editor, and built an integrated circuit layout, routing, and verification system. In 1991, Valid merged with Cadence Design Systems, after which Dr. Scheffer worked on place and route, floorplanning systems, and signal integrity issues until 2008. In 2008, Dr. Scheffer switched fields to neurobiology, studying the structure and function of the brain by using electron microscope images to reconstruct its circuits. He is currently affiliated with the Howard Hughes Medical Institute, Ashburn, Virginia, USA. As electronic design automation (EDA) is no longer his daily staple (though his research uses a number of algorithms derived from EDA), he is extremely grateful to Igor Markov for taking on this portion of these books. Lou is also interested in the Search for Extraterrestrial Intelligence (SETI), serves on the technical advisory board for the Allen Telescope Array at the SETI Institute, and has coauthored the book SETI-2020, in addition to several technical articles in the field.
"About this title" may belong to another edition of this title.
If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
INFORMATION REGARDING THE RIGHT OF CANCELLATION
Statutory Right to cancel
You have the right to cancel this contract within 14 days for any reason.
The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.
To exercise the right to cancel, you must inform us, Biblios, 47 Kaisetstrasse, 60329, frankfurt am main, hessen, Germany, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.
To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.
Effects of cancellation
If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to us or Biblios, 47 Kaisetstrasse, 60329, frankfurt am main, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of cancellation
The right of cancellation does not apply to:
Model withdrawal form
(complete and return this form only if you wish to withdraw from the contract)
To: (Biblios, 47 Kaisetstrasse, 60329, frankfurt am main, hessen, Germany)
I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),
Ordered on (*)/received on (*)
Name of consumer(s)
Address of consumer(s)
Signature of consumer(s) (only if this form is notified on paper)
Date
* Delete as appropriate.
| Order quantity | 25 to 45 business days | 8 to 14 business days |
|---|---|---|
| First item | £ 8.77 | £ 16.47 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.