Electrical Design of Through Silicon Via
Manho Lee (u. a.)
Sold by preigu, Osnabrück, Germany
AbeBooks Seller since 5 August 2024
New - Soft cover
Condition: New
Ships from Germany to U.S.A.
Quantity: 5 available
Add to basketSold by preigu, Osnabrück, Germany
AbeBooks Seller since 5 August 2024
Condition: New
Quantity: 5 available
Add to basketElectrical Design of Through Silicon Via | Manho Lee (u. a.) | Taschenbuch | ix | Englisch | 2016 | Springer Netherland | EAN 9789401779494 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.
Seller Inventory # 103163738
Through Silicon Via (TSV) is a key technology for realizing three-dimensional integrated circuits (3D ICs) for future high-performance and low-power systems with small form factors. This book covers both qualitative and quantitative approaches to give insights of modeling TSV in a various viewpoints such as signal integrity, power integrity and thermal integrity. Most of the analysis in this book includes simulations, numerical modelings and measurements for verification. The author and co-authors in each chapter have studied deep into TSV for many years and the accumulated technical know-hows and tips for related subjects are comprehensively covered.
Manho Lee received the B.S. and M.S. degrees in electrical engineering from the Korea Advanced Institute of Science and Technology, Daejeon, Korea, in 2010 and 2012, respectively, where he is currently pursuing the Ph.D. degree in electrical engineering.
His current research interests include the modeling of noise coupling between active circuit and TSV.
Jun So Pak (M'02) received the B.S. degree in electrical communication engineering from Hanyang University, Seoul, Korea, in 1998 and the M.S. and Ph.D. degrees in electrical engineering from the Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea, in 2000 and 2005, respectively.
He was a Research Fellow with the High Density Interconnection Group, National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan, in 2005, where he was involved in development of interconnection techniques and interposers for 3-D multichip packaging. Since 2007, he has been a Research Professor with the Department of Electrical Engineering, KAIST. He was the Founder and Director of the 3D-IC Research Center (3DIC- RC) in 2005. His current research interests include development of 3-D stacked chip packaging using through silicon via.
Dr. Pak was a recipient of the Research Fellowship Award from the Japan Society for the Promotion of Science in 2005.
Joungho Kim (M'04) received the B.S. and M.S. degrees from Seoul National University, Seoul, Korea, in 1984 and 1986, respectively and the Ph.D. degree from the University of Michigan, Ann Arbor, in 1993, all in electrical engineering. He was involved in femtosecond time-domain optical measurement techniques for high-speed devices and circuit testing during his graduate study.After completing the Ph.D. degree, he joined Picometrix, Inc., Ann Arbor, MI, in 1993, as a Research Engineer, where he was involved in development of pico-second sampling systems and 70-GHz photoreceivers. He joined theMemory Di-vision, Samsung Electronics, Kiheung, Korea, in 1994, where he was engaged in Gbit-scale dynamic random access memory design. He joined the Korea Advanced Institute of Science and Technology (KAIST), Taejon, Korea, in 1996, where he is currently a Professor with the Electrical Engineering and Computer Science Department. At KAIST, his research focuses on modeling, design and measurement methodologies of hierarchical semiconductor systems including high-speed chips, packages, interconnection and multilayer printed circuit boards. Specifically, his major research is focused on chip-package co-design and simulation for signal integrity, power integrity, ground integrity, timing integrity and radiated emission in 3-D semiconductor packages, system-in-packages (SiPs) and system-on-packages. He has successfully demonstrated low-noise and high-performance designs of more than ten SiPs for wireless communication applications, including ZigBee, T-DMB, NFC and UWB. He was on sabbatical leave with Silicon Image, Inc., Sunnyvale, CA, as a Staff Engineer, from 2001 to 2002. He was responsible for low-noise package design of SATA, FC, HDMI and Panel Link SerDes devices. Currently, he is the Director of the Satellite Research Laboratory, Hyundai Motors, Hwaseong-si, Kyungki-do, Korea, for electromagnetic interference and electromagnetic compatibility modeling of automotive RF, power electronic and cabling systems. He has authored or co-authored more than 210 papers in refereed journals and conferences.
Dr. Kim has been the Chair or the Co-Chair of the EDAPS Workshop since 2002. He is currently an Associate Editor of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY."About this title" may belong to another edition of this title.
Standard Business Terms and customer information
I. Standard business terms
§ 1 Basic provisions
(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (preigu GmbH & Co. KG) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.
(2) A ?consumer' in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwh...
Instructions for revocation
Right of withdrawal for the sale of goods
Revocation right for consumers
(A ‘consumer' is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within 14 days without specifying any reasons.
The revocation period is 14 days with effect from the day,
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
To exercise your right of withdrawal, you must inform us (preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Telephone number: +49 (0) 541 / 580 72 84, E-Mail address: mail@preigu.de) by means of a clear declaration (e.g. a letter sent by post, or an e-mail) of your decision to withdraw from this contract. You can use the attached model withdrawal form for this purpose, which is, however, not mandatory.
You can also exercise your right of withdrawal online by clicking on a button labelled accordingly (such as ‘Withdraw from contract' or similar) on the AbeBooks/ZVAB website. If you use this online function, you will immediately receive a confirmation of receipt on a durable medium (e.g. via email) containing information on the content of the withdrawal notice, as well as the date and time of its receipt.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts. The revocation right expires prematurely in case of contracts
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
To preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Email address: mail@preigu.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date
(*) Cross out the incorrect option.
| Order quantity | 60 to 60 business days | 60 to 60 business days |
|---|---|---|
| First item | £ 60.04 | £ 60.04 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.