This book cover the main electronics components of the Diesel Common Rail injection systems. It goes into details on Piezo-injectors, fuel pressure sensors, high pressure operation, electrical characteristics of the injector pulse, pressure regulator, injector crystal stack description and it electronics. A complete first book for anyone, technician or layman alike to get his/her bearings on the technology.

Table of Contents

Diesel Common Rail Injection, Facts 1 (Presents a detailed analysis of Diesel Common Rail fuel injection systems. It explains te differences between older and newer Diesel Systems, the detailed anatomy of the injection as in multiple injection events, explores the pressure variables, and more about this type of Diesel Injection system.)

Diesel Common Rail Injection, Facts 2 (Concentrates on the particulars of the Diesel Injection Pump, both high pressure and low, explains the fuel rail pressure sensor operation and how it ties with the electronic system. It also touches on common issues of back leakage seen on these systems.)

Diesel Piezo-Electric Injector Operation (Goes deep into the operation of the Diesel Piezo Injector. It explains the difference between the coil or magnetic injectors, seen on gasoline engines and the piezo or crystal injector. Talks about the multi-event nature of the pulse and shows how pressure multiplication triggers the injector.)

Diesel Piezo-Electric Injector Driver-Transistor (Explains in detail how the piezo-injector is triggered from within the E CM. Shows how actual transistor drivers react electrically (push-pull transistor arrangement) to trigger the piezo-device. You'll also see the dual polarity triggering nature of the piezo injector circuit permitting what's called a partial pintle lift.)

Diesel Electric Injector Voltages (Explain the dilation of the Diesel piezo injector and the voltage characteristics of the injector pulse. Here you'll understand why a 100 volt initial pulse is applied, then how the small chamber actuates the main pintle. We also touch up on current amperage values.)

Diesel Injector Pulse and Pressure (Goes into the effective inertia of the piezo stack and why there's no clicking noise from these injectors, how precise they are, explain the high pressures and voltages needed such as 400 volts and amperages of -20 to +20 Amps.)

Diesel Injector Pulse Anatomy (Explains the Tourmaline or piezo-injector pulse analysis down to a very detailed form. Covers the pulse duration down to the mili-second, its fuel pressure, discuses idle and emissions reduction and multiple injection events.)

Diesel Fuel Pressure Regulator Operation (Goes into details on the Diesel injection fuel pressure regulator solenoid valve. Discuses the fuel pressure sensor feedback, covers duty-cycle signal, proportional or inversely proportional, relationship of duty-cycle to pressure and some safety tips.)

Diesel Injection Pressure Sensor (Detailed explanation of how the ECM controls injection pulse by controlling pressure. Covers in detail the pressure sensor - different than other sensors - output signal down to the specific waveform analysis. Gives you a deep correlation of voltage to pressure and the entire pulse pressure cycle.)

Diesel Pressure Sensor Testing (Explains in details the electrical characteristics and the Diesel piezo injection pressure sensors, linear feedback to the ECM, reference voltage, sensor ground and signal line. Get an insight on KOEO signal voltage and the standard electrical values seen with these systems.)

BONUS - Accelerator Pedal Position Sensor (Explains the operation o the APP sensor for either the Diesels or gas engines. This multi-potentiometer sensor (for redundancy) and the throttle computer are the hart of the modern electronic throttle control system.)

About the Author

Mandy Concepcion has worked in the automotive field for over 21 years. He holds an Associates Degree in Applied Electronics Engineering as well as an ASE L1 certification. For the past 18 years he has been exclusively involved in the diagnosis of all the different electronic systems found in today’s vehicles. It is here where he draws extensive practical knowledge from his experience and hopes to convey it in this book. Mandy also designs, develops and produces his own books and DVD videos, and a series of automotive scan tools, oscilloscopes and specialized equipment.

"About this title" may belong to another edition of this title.

Store Description

Online Handel nur mit Neub�chern

Visit Seller's Storefront

Seller's business information

Moluna GmbH
Engberdingdamm 27, Greven, 48268, Germany

Sale & Shipping Terms

Terms of Sale

Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration

Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...

More Information

Right of cancellation

Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration

Revocation right for consumers
(A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)

Instructions for revocation

Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month with effect from the day,

on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;

In order to exercise your revocation right, you must inform us (Moluna GmbH, M�nsterstr. 105, 48268 Greven, Telephone number: 02571/5 69 89 33, Fax number: 02571/5 69 89 30, E-Mail address: abe@moluna.de) of your decision to revoke this contract by means of a clear declaration (e.g. a letter sent via post, fax or email). You can use the enclosed specimen revocation form for this, which however is not mandatory.

In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.

Consequences of the revocation

If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.

We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.

You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.

You bear the direct costs for returning the products.

You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.

Criteria for exclusion or expiry

The revocation right is not available for contracts

for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts.

The revocation right expires prematurely in case of contracts

for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.

Specimen - revocation form

(If you wish to revoke the contract, please fill up this form and send it back to us.)

To Moluna GmbH, Engberdingdamm 27, 48268 Greven, Fax number: 02571/5 69 89 30, Email address: abe@moluna.de :
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service ()
Ordered on ()/ received on ()
Name of the consumer(s)
Address of the consumer(s)
Signature of the consumer(s) (only in case of a notification on paper)
Date

(*) Cross out the incorrect option.

Shipping Terms

II. Kundeninformationen

Identit�t des Verk�ufers

Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de

Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.

Informationen zum Zustandekommen des Vertrages

Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturm�glichkeiten erfolgen nach Ma�gabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Gesch�ftsbedingungen (Teil I.).

Vertragssprache, Vertragstextspeicherung

3.1. Vertragssprache ist deutsch .

3.2. Der vollst�ndige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung k�nnen die Vertragsdaten �ber die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzvertr�gen und die Allgemeinen Gesch�ftsbedingungen nochmals per E-Mail an Sie �bersandt.

Wesentliche Merkmale der Ware oder Dienstleistung

Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.

Preise und Zahlungsmodalit�ten

5.1. Die in den jeweiligen Angeboten angef�hrten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschlie�lich aller anfallenden Steuern.

5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind �ber eine entsprechend bezeichnete Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zus�tzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.

5.3. Die Ihnen zur Verf�gung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot ausgewiesen.

5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsanspr�che aus dem geschlossenen Vertrag sofort zur Zahlung f�llig.

Lieferbedingungen

6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschr�nkungen finden sich unter einer entsprechend bezeichneten Schaltfl�che auf unserer Internetpr�senz oder im jeweiligen Angebot.

Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfl�che keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).

6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zuf�lligen Untergangs und der zuf�lligen Verschlechterung der verkauften Sache w�hrend der Versendung erst mit der �bergabe der Ware an Sie �bergeht, unabh�ngig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenst�ndig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausf�hrung der Versendung bestimmte Person beauftragt haben.

Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.

Gesetzliches M�ngelhaftungsrecht

Die M�ngelhaftung richtet sich nach der Regelung "Gew�hrleistung" in unseren Allgemeinen Gesch�ftsbedingungen (Teil I).

letzte Aktualisierung: 23.10.2019

Shipping rates from Germany to U.S.A.

Shipping rates from Germany to U.S.A.
Order quantity	26 to 60 business days	26 to 60 business days
First item	� 42.27	� 42.27

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.

Detailed Seller Information