Designing Embedded Processors: A Low Power Perspective
Sink D.
Sold by Basi6 International, Irving, TX, U.S.A.
AbeBooks Seller since 24 June 2016
New - Hardcover
Condition: New
Ships within U.S.A.
Quantity: 8 available
Add to basketSold by Basi6 International, Irving, TX, U.S.A.
AbeBooks Seller since 24 June 2016
Condition: New
Quantity: 8 available
Add to basketNew. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.
Seller Inventory # ABEOCT25-154632
As we embrace the world of personal, portable, and perplexingly complex digital systems, it has befallen upon the bewildered designer to take advantage of the available transistors to produce a system which is small, fast, cheap and correct, yet possesses increased functionality.
Increasingly, these systems have to consume little energy. Designers are increasingly turning towards small processors, which are low power, and customize these processors both in software and hardware to achieve their objectives of a low power system, which is verified, and has short design turnaround times.
Designing Embedded Processors examines the many ways in which processor based systems are designed to allow low power devices. It looks at processor design methods, memory optimization, dynamic voltage scaling methods, compiler methods, and multi processor methods. Each section has an introductory chapter to give a breadth view, and have a few specialist chapters in the area to give a deeper perspective. The book provides a good starting point to engineers in the area, and to research students embarking upon the exciting area of embedded systems and architectures.
Dr. Sri Parameswaran received his B.Eng Degree from Monash University and his Ph.D degree from the University of Queensland in Australia. He has held visiting appointments at University of California, Kyushu University and Australian National University. He has also worked as a consultant to the NEC Research laboratories at Princeton, USA and to the Asian Development Bank in Philippines.
Currently Dr Parameswaran is at the University of New South Wales and is the Program Director of Computer Engineering. He has served on several program committees such as ICCAD, Euro-DAC, DATE, Codes-ISSS, CASES, APCHDL etc. He has given full day tutorials at ICCAD, Euro DAC and VLSI Design Conference. In 2002, he served as the program committee chair for the IEEE/ACM Codes Hardware/Software Co-design Symposium. Dr Parameswaran’s research interests are in Application Specific Instruction Set Processors and Low power Design for Embedded systems. He leads a group of fifteen researchers, and holds grants from Australian Research Council and Industry.
Dr. Joerg Henkel received his Master and Ph.D ("cum laude") degrees both from the Technical University of Braunschweig, Germany. He then joined the Computer & Communication Research Laboratories CCRL (now NEC Laboratories America) in Princeton, NJ, where he led various projects in the areas of low power system level design and advanced embedded architectures. In between, he had an appointment as a visiting professor at the Univ. of Notre Dame, IN.
Dr. Henkel is currently with Karlsruhe University (TH), Germany, where he is directing the Chair for Embedded Systems CES. He has served or is serving as a program committee member for major conferences in electronic design automation and embedded system design like ICCAD, DATE, ASP-DAC, ISLPED, Codes-ISSS, CASES, RTSS, RSP. He has given full-day tutorials at conferences like DAC, ICCAD, DATE and others in the area of embedded system design. In 2001 he served asa Program Chair for the IEEE/ACM Codes Hardware/Software Co-design Symposium and was a General of the same convention in 2002. Furthermore, he was a Program Chair for the 2002 IEEE Workshop on Rapid System Prototyping. He has guest-edited special issues on hardware/software co-design in the IEEE Computer Magazine and on rapid system prototyping with Kluwer. Dr. Henkel holds five patents. He is a Senior Member of the IEEE.
"About this title" may belong to another edition of this title.
Professional Book Seller shipping from Multiple Locations Worldwide for fastest delivery possible!
If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
INFORMATION REGARDING THE RIGHT OF CANCELLATION
Statutory Right to cancel
You have the right to cancel this contract within 14 days without giving any reason.
The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.
To exercise the right to cancel, you must inform us, Basi6 International, 1944 Lantana Ln, 75063, Irving, Texas, U.S.A., 1 2144998944, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.
To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.
Effects of cancellation
If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to us or Basi6 International, 1944 Lantana Ln, 75063, Irving, Texas, U.S.A., 1 2144998944, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of cancellation
The right of cancellation does not apply to:
Model withdrawal form
(complete and return this form only if you wish to withdraw from the contract)
To: (Basi6 International, 1944 Lantana Ln, 75063, Irving, Texas, U.S.A., 1 2144998944)
I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),
Ordered on (*)/received on (*)
Name of consumer(s)
Address of consumer(s)
Signature of consumer(s) (only if this form is notified on paper)
Date
* Delete as appropriate.
All orders shipped via FedEx or DHL and delivered to your doorstep within 3-5 days. We do not ship to P.O.Boxes and a proper street address must be provided to avoid any delays.
| Order quantity | 5 to 14 business days | 3 to 6 business days |
|---|---|---|
| First item | £ 0.00 | £ 0.00 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.