Neuware - Anchors are everyday items in construction. However, the ever more complex world of building has led to anchor technology being investigated in more and more scientific detail during the course of product development. New anchor systems take into account the increasing diversity of base materials and the required economic efficiency. The scientific studies result in sometimes highly complex engineering design methods that are specified in numerous codes of practice, e.g. EN 1992-4 Eurocode 2 Design of concrete structures Part 4: Design of fastenings for use in concrete . As a result, it is no longer possible to design an anchor with a simple, quick and easily grasped manual calculation.However, the experience of the authors over the past 20 years shows that in order to gain the acceptance of users, there is an urgent need to translate academic anchor theory into manageable anchor practice for real building sites.It is exactly that gap that this book intends to fill. The focus is on the practical use of anchors and answering practical questions such as: 'Which anchor do I need for my fastening task and what do I have to consider ' To answer this question, the authors guide the reader through the seemingly vast number of anchor systems and provide advice for everyday building situations. The theory regarding the structural behaviour is only explained, and then only briefly, when it helps to solve the fastening task and understand the solution to that task. For clarity, the reader is merely referred to the existing codes of practice and other specialist publications that provide summaries.(Package: Print Book + ePDF); D�bel sind am Bau echte Alltagsprodukte. Aber das immer komplexer werdende Baugeschehen bedingt, dass die Produkte in der D�beltechnik immer detaillierter wissenschaftlich untersucht und beschrieben werden. Neue D�belsysteme tragen der zunehmenden Vielfalt an Verankerungsgr�nden und der geforderten Wirtschaftlichkeit Rechnung. Sie resultieren aus wissenschaftlichen Untersuchungen mithilfe ingenieurm��iger Berechnungs- und Bemessungsverfahren, die in umfangreichen Regelwerken festgehalten werden, z. B. in EN 1992-4 Eurocode 2 Bemessung und Konstruktion von Stahlbeton- und Spannbetontragwerken Teil 4: Bemessung der Verankerungen von Befestigungen in Beton . Dies hat zur Folge, dass kaum eine D�bel-Bemessung noch mit einer einfachen und �bersichtlichen Handrechnung erfolgen kann.Die Erfahrungen der Autoren in den vergangenen 20 Jahren zeigen, dass h�ufig beliebige D�bel eingesetzt werden, ohne den konkreten Anwendungsfall hinsichtlich Belastung und Verankerungsgrund einsch�tzen zu k�nnen. Daher bedarf es neben den theoretischen Erkenntnissen �ber D�belsysteme dringend einiger in der Praxis beherrschbare D�bel-Regeln f�r den Baustellen-Alltag. Dieses Buch schlie�t diese L�cke. Der Schwerpunkt liegt in der praktischen D�belanwendung und der Beantwortung praktischer Fragen, wie: Welchen D�bel brauche ich f�r meine Befestigungsaufgabe und was muss ich dabei beachten Die Autoren stellen einen Leitfaden durch die un�berschaubar erscheinende Vielzahl an D�belsystemen zur Verf�gung und geben Hilfestellung f�r den Baualltag. Die Theorie zum Tragverhalten wird nur dann kurz erl�utert, wenn sie zur L�sung der Befestigungsaufgabe hilfreich ist und zum Verstehen beitr�gt. Daher wird aus �bersichtsgr�nden lediglich auf das vorhandene Regelwerk und die Fachliteratur verwiesen.(Package: Print Book + ePDF).

Seller Inventory # 9783433033036

Contact seller

Report this item

Bibliographic Details

Title: Anchor Technology in Concrete and Masonry for Practitioners and Engineers : With Recommendations for the Execution and Evaluation of Job Site Tests (incl. E -Book as PDF)
Publisher: Ernst W. + Sohn Verlag Dez 2024
Publication Date: 2024
Language: English
ISBN 10: 343303303X
ISBN 13: 9783433033036
Binding: B�ndel
Condition: Neu
Dimensions: 242 millimeters width by 168 millimeters height by 16 millimeters depth
Weight: 591 grams

About this title

Synopsis

Anchors are everyday items in construction. However, the ever more complex world of building has led to anchor technology being investigated in more and more scientific detail during the course of product development. New anchor systems take into account the increasing diversity of base materials and the required economic efficiency. The scientific studies result in sometimes highly complex engineering design methods that are specified in numerous codes of practice, e.g. EN 1992-4 ?Eurocode 2 ? Design of concrete structures ? Part 4: Design of fastenings for use in concrete?. As a result, it is no longer possible to design an anchor with a simple, quick and easily grasped manual calculation.
However, the experience of the authors over the past 20 years shows that in order to gain the acceptance of users, there is an urgent need to translate academic anchor theory into manageable anchor practice for real building sites.
It is exactly that gap that this book intends to fill. The focus is on the practical use of anchors and answering practical questions such as: "Which anchor do I need for my fastening task and what do I have to consider?" To answer this question, the authors guide the reader through the seemingly vast number of anchor systems and provide advice for everyday building situations. The theory regarding the structural behaviour is only explained, and then only briefly, when it helps to solve the fastening task and understand the solution to that task. For clarity, the reader is merely referred to the existing codes of practice and other specialist publications that provide summaries.
(Package: Print Book + ePDF)

About the Authors

Dr.-Ing. Dipl.-Wirt.-Ing. (FH) J�rgen H. R. K�enzlen LL.M. M.A. M.A.
1993-1998 Studies in Civil Engineering at the University of Stuttgart, majoring in Hydraulic Engineering; 1998-1999 Studies in Business Engineering at the University of Applied Sciences Pforzheim.
1999-2004 Scientific assistant and deputy laboratory manager at the Institute of Construction Materials at the University of Stuttgart, Department of Fastening Technology; 2004 doctorate (Dr.-Ing.) on the load-bearing behaviour of screw anchors.
2004-2007 product manager for window fasteners at Adolf W�rth GmbH & Co. KG in K�nzelsau/Germany; since 2008 project manager in product management with a focus on approval of anchors in the masonry sector and in the window fastening sector at Adolf W�rth GmbH & Co. KG.
Collaboration in various working groups and committees on the subject of fall protection, burglary protection, window fixings, masonry; collaboration in the DIBt working group "Tests in Construction". Author and co-author of over 100 technical papers and reference books in the fields of fastening technology and flood protection.

Dipl.-Ing. (FH) Eckehard Scheller
1987 Apprenticeship as a wood mechanic (carpenter) followed by 2 years as a journeyman; then 1992-1995 civil engineering studies at the Technical University of Applied Sciences Berlin (TFH).
1996-2000 structural engineer at Pichler Ingenieure GmbH Berlin.
2001-2012 German Institute for Building Technology (DIBt), Department I2 "Anchorages and fixings, stairs".
2012-2017 Project Manager Technical Marketing Fastening Technology at Adolf W�rth GmbH & Co. KG, K�nzelsau/Germany.
Since 2017, member of the DIBt working group "Tests in Construction".
2018-2020 Head of Technology and Standardisation at the Deutsche Gesellschaft f�r Mauerwerks- und Wohnungsbau e. V. DGfM (German Society for Masonry and Housing Construction) and head of the office of the Deutscher Ausschuss f�r Mauerwerk e.V. DAfM (German Masonry Committee).
Since 2019 ISB Block und Becker Consulting Engineers PartGmbB.

Dipl.-Ing. Rainer Becker
1993 University studies in civil engineering, specialising in structural engineering.
2000-2013 Research assistant at the Institute for Building Research and research in the area of fastening technology and ETICS; 2001-2012 deputy test centre manager "post-installed reinforcement connections" at the Technical University of Dortmund.
Since 2013 managing director of fobatec GmbH with a focus on anchoring and fastening technology, and since 2017 test centre manager "post-installed reinforcement connections" of fobatec GmbH.
Since 2018 founding partner of ISB Block und Becker Beratende Ingenieure PartGmbB.
Since 2022 managing director of OPUS Engineering GmbH with focus on anchorage and fastening technology.
Since 2007, collaboration in various working groups of the DIBt expert committee SVA 21; 2013 appointment to the DIBt SVA 21 "Anchorages and Fastenings"; since 2015 collaboration in the DIBt working group "Tests in Construction"; 2020 appointment to the DIBt SVA "A - ETICS" and "B1 - ETICS on Mineral Substrates".

Dipl.-Ing. Thomas Kuhn
2005 Diploma in civil engineering at the Technical University of Kaiserslautern.
2005-2006 Product development and application consulting at Metall-Kunststoff-Technik GmbH & Co. KG (MKT).
Since 2006, sales manager at Adolf W�rth GmbH & Co. KG, and customer training for anchor users;
2008-2009 Deputy Head and 2010-2022 Head of the DIN EN ISO/IEC 17025:2018 accredited W�rth anchor testing laboratory.
2022 Key Account Manager Anchor Technology in construction site project management; Since 2023 OPUS Engineering GmbH.
Member of TG2.9 Fastenings to structural concrete and masonry of the fib International Federation for Structural Concrete since 2011.

Thorsten Immel
1995-1998 Apprenticeship as a wholesale and foreign trade merchant at Adolf W�rth GmbH & Co. KG;
1998-2001 Sales manager at Adolf W�rth GmbH & Co. KG;
2002-2004 Further training as a technical business administrator at the Chamber of Industry and Commerce, and 2002 specialised training as a "Certified Fastening Technician" trainer (Institut f�r Werkstoffe im Bauwesen IWB Stuttgart);
2002-2010 Product and application consulting, fastening technology division, Adolf W�rth GmbH & Co. KG.
Since 2010 W�rth anchor testing laboratory (DIN EN ISO/IEC 17025:2018 accredited): Performance and documentation of tests as part of approval and assessment procedures for anchors, creation of corresponding approval systems, performance of external and internal, theoretical and practical anchor training courses.

Dr.-Ing. Dipl.-Wirt.-Ing. (FH) J�rgen H. R. K�enzlen LL.M. M.A. M.A.
1993-1998 Studium Bauingenieurwesen an der Universit�t Stuttgart, Schwerpunkt Wasserbau; 1998-1999 Studium Wirtschaftsingenieurwesen an der Hochschule Pforzheim.
1999-2004 wissenschaftlicher Mitarbeiter und stellvertretender Laborleiter am Institut f�r Werkstoffe an der Universit�t Stuttgart, Fachbereich Befestigungstechnik, 2004 Promotion zum Dr.-Ing. �ber das Tragverhalten von Schraubd�beln.
2004-2007 Produktmanager f�r Fensterbefestigungen bei der Adolf W�rth GmbH & Co. KG in K�nzelsau; seit 2008 Projektleiter im Produktmanagement mit Schwerpunkt Zulassung von D�beln im Bereich Mauerwerk und im Bereich Fensterbefestigungen der Adolf W�rth GmbH & Co. KG.
Mitarbeit in diversen Arbeitskreisen und Aussch�ssen zum Thema Absturzsicherungen, Einbruchschutz, Fensterbefestigungen, Mauerwerk; Mitarbeit im DIBt-Arbeitskreis ?Versuche am Bau?. Autor und Koautor von �ber 100 Fachbeitr�gen und Fachb�chern in den Bereichen Befestigungstechnik und Hochwasserschutz.

Dipl.-Ing. (FH) Eckehard Scheller
1987 Ausbildung zum Holzmechaniker (Tischler) mit anschlie�ender 2-j�hriger Gesellent�tigkeit; danach 1992-1995 Bauingenieurstudium an der Technischen Fachhochschule Berlin (TFH).
1996-2000 Tragwerksplaner im Hochbau/Konstruktiven Ingenieurbau im B�ro Pichler Ingenieure GmbH Berlin.
2001-2012 Deutsches Institut f�r Bautechnik (DIBt), Referat I2 ?Verankerungen und Befestigungen, Treppen?.
2012-2017 Projektleiter Technisches Marketing Befestigungstechnik bei der Adolf W�rth GmbH & Co. KG, K�nzelsau.
Seit 2017 Mitarbeit im DIBt-Arbeitskreis ?Versuche am Bau?.
2018-2020 Leiter Technik und Normung bei der Deutschen Gesellschaft f�r Mauerwerks- und Wohnungsbau e. V. (DGfM) und Leiter der Gesch�ftsstelle des Deutschen Ausschusses f�r Mauerwerk e. V. (DAfM).
Seit 2019 ISB Block und Becker Beratende Ingenieure PartGmbB.

Dipl.-Ing. Rainer Becker
1993 Hochschulstudium Bauingenieurwesen, Fachrichtung Konstruktiver Ingenieurbau.
2000-2013 T�tigkeit als wissenschaftlicher Mitarbeiter am Institut f�r Bauforschung und im Forschungsbereich Befestigungstechnik und WDVS, sowie 2001-2012 stellvertretender Pr�fstellenleiter ?nachtr�gliche Bewehrungsanschl�sse? der Technischen Universit�t Dortmund.
Seit 2013 Gesellschafter-Gesch�ftsf�hrer der fobatec GmbH mit dem Schwerpunkt Verankerungs- und Befestigungstechnik, und seit 2017 Pr�fstellenleiter ?nachtr�gliche Bewehrungsanschl�sse? der fobatec GmbH.
Seit 2018 Gr�ndungspartner der ISB Block und Becker Beratende Ingenieure PartGmbB.
Seit 2022 Gesch�ftsf�hrer der OPUS Engineering GmbH mit dem Schwerpunkt Verankerungs- und Befestigungstechnik.
Seit 2007 Mitarbeit in diversen Arbeitskreisen des Sachverst�ndigenausschusses SVA 21 des DIBt; 2013 Berufung in den SVA 21 ?Verankerungen und Befestigungen? des DIBt; seit 2015 Mitarbeit im DIBt-Arbeitskreis ?Versuche am Bau?; 2020 Berufung in die SVA ?A ? WDVS? und ?B1 ? WDVS auf mineralischen Untergr�nden? des DIBt.

Dipl.-Ing. Thomas Kuhn
2005 Diplom-Bauingenieur an der Technischen Universit�t Kaiserslautern.
2005-2006 Mitarbeiter in den Bereichen Produktentwicklung und Anwendungsberatung bei der Firma Metall-Kunststoff-Technik GmbH & Co. KG (MKT).
Seit 2006 Innendienstmitarbeiter bei der Firma Adolf W�rth GmbH & Co. KG, hier auch t�tig im Bereich Kundenseminare f�r D�belanwender; 2008?2009 stellvertretender Leiter und 2010-2022 Leiter des nach DIN EN ISO/IEC 17025:2018 akkreditierten W�rth-D�belpr�flabors.
2022 Key Account Manager D�beltechnik im Baustellen-Projekt-Management;
seit 2023 Mitarbeiter der OPUS Engineering GmbH.
Seit 2011 Mitglied der TG2.9 Fastenings to structural concrete and masonry der fib International Federation for Structural Concrete.

Thorsten Immel
1995-1998 Ausbildung zum Gro�- und Au�enhandelskaufmann bei der Firma Adolf W�rth GmbH & Co. KG;
1998-2001 Verkauf Innendienst bei der Firma Adolf W�rth GmbH & Co. KG;
2002-2004 Weiterbildung zum Technischen Fachwirt IHK, und 2002 Fachausbildung zum Trainer ?Zertifizierter Befestigungstechniker? (Institut f�r Werkstoffe im Bauwesen IWB Stuttgart);
2002-2010 Mitarbeiter in der Produkt- und Anwendungsberatung, Bereich Befestigungstechnik.
Seit 2010 Mitarbeiter im DIN EN ISO/IEC 17025:2018 akkreditierten W�rth-D�belpr�flabor: Durchf�hrung und Dokumentation von Versuchen im Rahmen von Zulassungs- und Bewertungsverfahren f�r D�bel, Erstellung von entsprechenden Zulassungsanlagen, Durchf�hrung von externen und internen, theoretischen und praktischen D�bel-Schulungen.

"About this title" may belong to another edition of this title.

Store Description

Das Unternehmen AHA-BUCH GmbH: Seit der Gr�ndung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisg�nstig wie m�glich ihren B�cherwunsch zu erf�llen. Unsere Firma besch�ftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine W�nsche! Auf �ber 3700 m2 Fl�che haben wir �ber 100.000 B�cher, Modernes Antiquariat und Spiele auf Lager.

Visit Seller's Storefront

Seller's business information

AHA-BUCH GmbH
Garlebsen 48, Einbeck, 37574, Germany

Sale & Shipping Terms

Terms of Sale

General Terms and Conditions and Customer Information / Privacy Policy

I. General Terms and Conditions

� 1 Basic provisions

(1) The following terms and conditions apply to all contracts that you conclude with us as a provider (AHA-BUCH GmbH) via the Internet platforms AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of any of your own terms and conditions used by you will be objected to

(2) A consumer within the meaning of the following regulations is any natural person who concludes...

More Information

Right of withdrawal

If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

Information regarding the right of withdrawal

Statutory right to withdraw

You have the right to withdraw from this contract within 14 days without giving any reason.

The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.

To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.

To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.

Effects of withdrawal

If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to AHA-BUCH GmbH, Einbeck, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of withdrawal

The right of withdrawal does not apply to:

The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.

Shipping Terms

We ship your order after we received them
for articles on hand latest 24 hours,
for articles with overnight supply latest 48 hours.
In case we need to order an article from our supplier our dispatch time depends on the reception date of the articles, but the articles will be shipped on the same day.

Our goal is to send the ordered articles in the fastest, but also most efficient and secure way to our customers.

Shipping rates from Germany to U.S.A.

Shipping rates from Germany to U.S.A.
Order quantity	30 to 40 business days	7 to 14 business days
First item	� 54.60	� 63.28

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.

Detailed Seller Information