Analog and Mixed-Signal Circuits in Nanoscale CMOS
New - Hardcover
Condition: New
Ships from Germany to U.S.A.
Quantity: Over 20 available
Add to basketCondition: New
Quantity: Over 20 available
Add to basketThis book provides readers with a single-source reference to the state-of-the-art in analog and mixed-signal circuit design in nanoscale CMOS. Renowned authors from academia describe creative circuit solutions and techniques, in state-of-the-art designs, enabling readers to deal with today’s technology demands for high integration levels with a strong miniaturization capability.
Rui Martins (IEEE Fellow'08), born in April 30, 1957, received the Bachelor, Masters, and Ph.D. degrees, as well as the Habilitation for Full-Professor in Electrical Engineering and Computers from the Department of Electrical and Computer Engineering (DECE), Instituto Superior Técnico (IST), U. of Lisbon, Portugal, in 1980, 1985, 1992 and 2001, respectively. He has been with the DECE / IST, U. of Lisbon since October 1980. Since Oct. 1992, has been on leave from U. of Lisbon and with the DECE, Faculty of Science and Technology (FST), University of Macau (UM), Macao, China, where he is a Chair-Professor since Aug. 2013. In FST, he was Dean (1994-1997), and has been UM’s Vice-Rector since Sep. 1997. From Sep. 2008 to Aug. 2018, Vice-Rector (Research) and from Sep. 2018 to Aug. 2023, Vice-Rector (Global Affairs). Within the scope of his teaching and research activities he has taught 21 bachelor and master courses and, in UM, has supervised (or co-supervised) 47 theses, Ph.D. (26) and Masters (21). Authored or Co-authored: 9 books and 12 book chapters; 50 Patents, USA (39), Taiwan (3) & China (8); 722 papers, in scientific journals (329) and in conference proceedings (393); as well as other 70 academic works, in a total of 863 publications. He created in 2003 the Analog and Mixed-Signal VLSI Research Laboratory of UM, elevated in January 2011 to State Key Laboratory (SKLAB) of China (the 1st in Engineering in Macao), being its Founding Director. He was the Chair of UMTEC (UM company) from January 2009 to March 2019, supporting the incubation and creation in 2018 of Digifluidic, the first UM Spin-Off, whose CEO is a SKLAB PhD graduate. He was also a co-founder of Chipidea Microelectronics (Macao) [later Synopsys-Macao, and now Akrostar, where the CEO is one of his Ph.D graduates] in 2001/2002.
Rui Martins was Founding Chair of IEEE Macau Section (2003-2005) and IEEE Macau Joint-Chapter on Circuits And Systems (CAS) / Communications (COM) (2005-2008) [2009 World Chapter of the Year of IEEE CAS Society (CASS)], General Chair IEEE Asia-Pacific Conference on CAS – APCCAS’2008, Vice-President (VP) Region 10 (Asia, Australia and Pacific) (2009-2011) and VP-World Regional Activities and Membership of IEEE CASS (2012-2013), Associate-Editor of IEEE Transactions on CAS II: Express Briefs (2010-2013), nominated Best Associate Editor (2012-2013). He is a member of the Advisory Board of the Journal of Semiconductors of the Chinese Institute of Electronics (CIE), Institute of Semiconductors, Chinese Academy of Sciences, since January 2021, and a Fellow of the Asia-Pacific Artificial Intelligent Association since October 2021. He was also member of IEEE CASS Fellow Evaluation Committee in 2013, 2014 & 2019, and was appointed as the Chair of the committee (2018) and Vice-Chair (2021 & 2022); IEEE Nominating Committee of Division I Director (CASS/EDS/SSCS) (2014); and IEEE CASS Nominations Committee (2016-2017). In addition, he was General Chair of ACM/IEEE Asia South Pacific Design Automation Conference – ASP-DAC’2016, receiving the IEEE Council on Electronic Design Automation (CEDA) Outstanding Service Award in 2016, and also General Chair of the IEEE Asian Solid-State Circuits Conference – A-SSCC 2019. He was Vice-President (2005-2014), President (2014-2017) and now again Vice-President (2021-2024) of the Association of Portuguese Speaking Universities (AULP), in September 2021, AULP nominated him as an Honorary Member. Rui Martins received 3 Macao Government decorations: the Medal of Professional Merit (Portuguese-1999); the Honorary Title of Value (Chinese-2001) and the Medal of Merit in Education (Chinese-2021). Since July 2010, he was elected unanimously, to the Lisbon Academy of Sciences, as Corresponding Member (2010-2022) and Effective Member (from 2022), being the only Portuguese Academician working and living in Asia.
Pui-In Mak (IEEE Fellow’19) received the Ph.D. degree from the University of Macau (UM), Macao, China, in 2006. He is currently a Full Professor at the Department of Electrical and Computer Engineering, Faculty of Science and Technology, and the Deputy Director at the UM Institute of Microelectronics and Interim Director of the State Key Laboratory of Analog and Mixed-Signal VLSI, UM. His research interests are on analog and radio frequency (RF) circuits and systems for wireless and multidisciplinary innovations.
Pui-In Mak has been a fellow of U.K. Institution of Engineering and Technology (IET) for contributions to engineering research, education, and services since 2018, the IEEE for contributions to radio frequency and analog circuits since 2019, and U.K. Royal Society of Chemistry since 2020. His involvements with IEEE are as follows: an Editorial Board Member of IEEE Press from 2014 to 2016, a member of Board of Governors of the IEEE Circuits and Systems Society from 2009 to 2011, a Senior Editor of IEEE Journal on Emerging and Selected Topics in Circuits and Systems from 2014 to 2015, and an Associate Editor of IEEE Journal of Solid-State Circuits since 2018, IEEE Solid-State Circuits Letters since 2017, IEEE Transactions on Circuits and Systems I – Regular Papers from 2010 to 2011 and from 2014 to 2015, and IEEE Transactions on Circuits and Systems II – Express Briefs from 2010 to 2013. He is/was the TPC Vice Co-Chair of ASP-DAC in 2016, a TPC Member of Asian Solid-State Circuits Conference (A-SSCC) from 2013 to 2016 and in 2019, European Solid-State Circuits Conference (ESSCIRC) from 2016 to 2017, and International Solid-State Circuits Conference (ISSCC) from 2017 to 2019). He is/was a Distinguished Lecturer of the IEEE Circuits and Systems Society from 14 to 15 and the IEEE Solid-State Circuits Society from 2017 to 2018. He was the Chairman of the Distinguished Lecturer Program of IEEE Circuits and Systems Society from 2018 to 2019. He (co)-received the DAC/ISSCC Student Paper Award in 2005, the CASS Outstanding Young Author Award in2010, the National Scientific and Technological Progress Award in 2011, the Best Associate Editor of IEEE Transactions on Circuits and Systems II – Express Briefs from 2012 to 2013, the ASSCC Distinguished Design Award in 2015, and the ISSCC Silkroad Award in 2016. In 2005, he was decorated with the Honorary Title of Value for scientific merits by the Macau Government. He has been inducted as an Overseas Expert of the Chinese Academy of Sciences since 2018. He received the Xplorer Prize from the Tencent Foundation in 2022."About this title" may belong to another edition of this title.
Instructions for revocation/
Standard Business Terms and customer information/ data protection declaration
Revocation right for consumers
(A ?consumer? is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within one month without specifying any reasons.
The revocation period is one month...
If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
Information regarding the right of withdrawal
Statutory right to withdraw
You have the right to withdraw from this contract within 14 days without giving any reason.
The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.
To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.
To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.
Effects of withdrawal
If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to moluna, Greven, Germany, without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of withdrawal
The right of withdrawal does not apply to:
II. Kundeninformationen
Moluna GmbH
Engberdingdamm 27
48268 Greven
Deutschland
Telefon: 02571/5698933
E-Mail: abe@moluna.de
Wir sind nicht bereit und nicht verpflichtet, an Streitbeilegungsverfahren vor Verbraucherschlichtungsstellen teilzunehmen.
Die technischen Schritte zum Vertragsschluss, der Vertragsschluss selbst und die Korrekturmöglichkeiten erfolgen nach Maßgabe der Regelungen "Zustandekommen des Vertrages" unserer Allgemeinen Geschäftsbedingungen (Teil I.).
3.1. Vertragssprache ist deutsch .
3.2. Der vollständige Vertragstext wird von uns nicht gespeichert. Vor Absenden der Bestellung können die Vertragsdaten über die Druckfunktion des Browsers ausgedruckt oder elektronisch gesichert werden. Nach Zugang der Bestellung bei uns werden die Bestelldaten, die gesetzlich vorgeschriebenen Informationen bei Fernabsatzverträgen und die Allgemeinen Geschäftsbedingungen nochmals per E-Mail an Sie übersandt.
Die wesentlichen Merkmale der Ware und/oder Dienstleistung finden sich im jeweiligen Angebot.
5.1. Die in den jeweiligen Angeboten angeführten Preise sowie die Versandkosten stellen Gesamtpreise dar. Sie beinhalten alle Preisbestandteile einschließlich aller anfallenden Steuern.
5.2. Die anfallenden Versandkosten sind nicht im Kaufpreis enthalten. Sie sind über eine entsprechend bezeichnete Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot aufrufbar, werden im Laufe des Bestellvorganges gesondert ausgewiesen und sind von Ihnen zusätzlich zu tragen, soweit nicht die versandkostenfreie Lieferung zugesagt ist.
5.3. Die Ihnen zur Verfügung stehenden Zahlungsarten sind unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot ausgewiesen.
5.4. Soweit bei den einzelnen Zahlungsarten nicht anders angegeben, sind die Zahlungsansprüche aus dem geschlossenen Vertrag sofort zur Zahlung fällig.
6.1. Die Lieferbedingungen, der Liefertermin sowie gegebenenfalls bestehende Lieferbeschränkungen finden sich unter einer entsprechend bezeichneten Schaltfläche auf unserer Internetpräsenz oder im jeweiligen Angebot.
Soweit im jeweiligen Angebot oder unter der entsprechend bezeichneten Schaltfläche keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Tagen nach Vertragsschluss (bei vereinbarter Vorauszahlung jedoch erst nach dem Zeitpunkt Ihrer Zahlungsanweisung).
6.2. Soweit Sie Verbraucher sind ist gesetzlich geregelt, dass die Gefahr des zufälligen Untergangs und der zufälligen Verschlechterung der verkauften Sache während der Versendung erst mit der Übergabe der Ware an Sie übergeht, unabhängig davon, ob die Versendung versichert oder unversichert erfolgt. Dies gilt nicht, wenn Sie eigenständig ein nicht vom Unternehmer benanntes Transportunternehmen oder eine sonst zur Ausführung der Versendung bestimmte Person beauftragt haben.
Sind Sie Unternehmer, erfolgt die Lieferung und Versendung auf Ihre Gefahr.
Die Mängelhaftung richtet sich nach der Regelung "Gewährleistung" in unseren Allgemeinen Geschäftsbedingungen (Teil I).
letzte Aktualisierung: 23.10.2019
| Order quantity | 26 to 60 business days | 26 to 60 business days |
|---|---|---|
| First item | £ 42.49 | £ 42.49 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.