Title: Advances in Intelligent Manufacturing: Select Proceedings of ICFMMP 2019 (Lecture Notes in Mechanical Engineering)
Publisher: Springer
Publication year: 2021
Condition: New
Binding: Soft cover
Language: English
ISBN 10: 9811545677
ISBN 13: 9789811545672
Series: Book 129 of 268: Lecture Notes in Mechanical Engineering

About the Author

Prof. Grzegorz Krolczyk is Professor in the Opole University of Technology. He is an originator and a Project Manager of OUTech’s new Surface Integrity Laboratory. In his career he has held positions such as: head of unit design and technology, product engineer, production manager, product development engineer and production director. He is the co-author and project leader of a project Innovative, energy-efficient diaphragm flow device of a new generation. He is connected with the mechanical industry, where he managed teams from a few to over a hundred people. His industrial engineering experience was gained while working in an European holding company involved in machining of construction materials and plastic injection, where he was responsible for contacts with companies on technical issues such as quotation and implementation of new products. In professional career he was responsible from the implementation to production of products such as peristaltic pumps, ecological sprayers to spray organic pesticides and many pressure equipment operating e.g. in chemical plants. As a production manager, he was responsible from implementation to production and launching the assembly line for innovative sprayer ultra-low volume spraying system. He is author and co-author of over 80 scientific publications and nearly 20 studies and implementation of industry. The main directions of scientific activity are surface metrology, optimization of geometrical and physical parameters of surface integrity, optimization of production and cutting tool wear analysis in dry machining process of difficult-to-cut materials. He is also editor of various Journals and Books.

Dr. Chander Prakash is Associate Professor in the School of Mechanical Engineering, Lovely Professional University, Jalandhar, India. He has received Ph.D in mechanical engineering from Panjab University, Chandigarh, India. His area of research is biomaterials, rapid prototyping & 3-D printing, advanced manufacturing, modeling, simulation, and optimization. He has more than 11 years of teaching experience and 6 years’ of research experience. He has contributed extensively to the world in the titanium and magnesium based implant literature with publications appearing in Surface and Coating Technology, Materials and Manufacturing Processes, Journal of Materials Engineering and Performance, Journal of Mechanical Science and Technology, Nanoscience and Nanotechnology Letters, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. He has authored 60 research papers and 10 book chapters. He is also editor of 3 books: "Current Trends in Bio-manufacturing", Springer Series in Advanced Manufacturing, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., Dec. 2018; “3D Printing in Biomedical Engineering”, Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., August 2019, and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis", Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., March 2019. He is also guest editor of 3 journals: special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, Series: Mechanical Engineering (Scopus Index), Materials Science Forum (Scopus Index), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed).

Dr. Sunpreet Singh is researcher in NUS Nanoscience & Nanotechnology Initiative (NUSNNI). He has received Ph.D in Mechanical Engineering from Guru Nanak Dev Engineering College, Ludhiana, India. His area of research is additive manufacturing and application of 3D printing for development of new biomaterials for clinical applications. He has contributed extensively in additive manufacturing literature with publications appearing in Journal of Manufacturing Processes, Composite Part:B, Rapid Prototyping Journal, Journal of Mechanical Science and Technology, Measurement, International Journal of Advance Manufacturing Technology, and Journal of Cleaner Production. He has authored 10 book chapters and monographs. He is working in joint collaboration with Prof. Seeram Ramakrishna, NUS Nanoscience & Nanotechnology Initiative and Prof. Rupinder Singh, manufacturing research lab, GNDEC, Ludhiana. He is also editor of 3 books- "Current Trends in Bio-manufacturing", Springer Series in Advanced Manufacturing, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., Dec. 2018; “3D Printing in Biomedical Engineering”, Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., August 2019, and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis", Book series Materials Horizons: From Nature to Nanomaterials, Springer International Publishing AG, Gewerbestrasse 11, 6330 Cham, Switzerland., March 2019. He is also guest editor of 3 journals- special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, series: Mechanical Engineering (Scopus Index), Materials Science Forum (Scopus Index), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed).

Prof. J. Paulo Davim currently is Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He received his Ph.D. degree in mechanical engineering in 1997, M.Sc. degree in mechanical engineering (materials and manufacturing processes) in 1991, mechanical engineering degree (5 years) in 1986, from the University of Porto (FEUP), the Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and the D.Sc. from London Metropolitan University in 2013. He is Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in engineering and industrial management. He is also felicitated with Eur Ing by FEANI-Brussels and Fellow (FIET) by IET-London. He has more than 30 years of teaching and research experience in manufacturing, materials, mechanical and industrial engineering, with special emphasis in machining & tribology. He has also interest in management, engineering education and higher education for Sustainability. He has guided large numbers of postdocs, Ph.D. and master’s students as well as has coordinated and participated in several financed research projects. He has received several scientific awards. He has worked as evaluator of projects for ERC European Research Council and other international research agencies as well as examiner of Ph.D. thesis for many universities in different countries. He is the editor in chief of several international journals, guest editor of journals, books editor, book series editor and scientific advisory for many international journals and conferences. Presently, he is an editorial board member of 30 international journals and acts as reviewer for more than 100 prestigious Web of Science journals. In addition, he has also published, as editor (and co-editor), more than 100 books and as author (and co-author) more than 10 books, 80 book chapters and 400 articles in journals and conferences (more than 250 articles in journals indexed in Web of Science core collection /h-index 49+/7000+ citations, SCOPUS/h-index 56+/10000+ citations, Google Scholar/h-index 70+/16000+).

"About the title" may belong to another edition of this title.

Books Puddle

Woodside, NY, U.S.A.

4-star seller

AbeBooks seller since November 22, 2018

Shipping rates within U.S.A.

Item	12 to 19 business days	12 to 14 business days
First item	£ 2.99	£ 5.24

Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.

Payment methods

Store description

I mainly carry imported books from South East Asia / South Asia for readers of all Age Groups.

Specialty

South Asian and South East Asian Culture, Religion, Art etc

Seller's business information

PLETOS INC

6931 51st Avenue, WOODSIDE
Woodside, NY U.S.A. 11377

Contact sellerView this seller's itemsView seller's storefront

Terms of sale

We accept return for those books which are received damamged. Though we take appropriate care in packaing to avoid such situation.

Right of withdrawal

If you are a consumer you can withdraw from the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.

Information regarding the right of withdrawal

Statutory right to withdraw

You have the right to withdraw from this contract within 14 days without giving any reason.

The withdrawal period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the last good or the last lot or piece.

To exercise the right of withdrawal, electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". We will communicate to you an acknowledgement of receipt of such a withdrawal on a durable medium (e.g. by e-mail) without delay.

To meet the withdrawal deadline, it is sufficient for you to send your communication concerning your exercise of the right of withdrawal before the withdrawal period has expired.

Effects of withdrawal

If you withdraw from this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).

We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.

We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to withdraw from this contract.

We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

We may withhold reimbursement until we have received the goods back, or you have supplied evidence of having sent back the goods, whichever is the earliest.

You shall send back the goods or hand them over to Books Puddle, Woodside, New York, U.S.A., without undue delay and in any event not later than 14 days from the day on which you communicate your withdrawal from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.

Exceptions to the right of withdrawal

The right of withdrawal does not apply to:

The delivery of newspapers, journals or magazines with the exception of subscription contracts; and
The supply of digital content which is not supplied on a tangible medium (e.g. on a CD or DVD) if you accepted when you placed your order that we could start to deliver it, and that you could not withdraw once delivery had started.

Advances in Intelligent Manufacturing: Select Proceedings of ICFMMP 2019 (Lecture Notes in Mechanical Engineering)

Item description from seller

Bibliographic details

Synopsis

About the title