Acceptance Sampling in Quality Control
Schilling, Edward G./ Neubauer, Dean V.
Sold by Revaluation Books, Exeter, United Kingdom
AbeBooks Seller since 6 January 2003
New - Hardcover
Condition: New
Quantity: 2 available
Add to basketSold by Revaluation Books, Exeter, United Kingdom
AbeBooks Seller since 6 January 2003
Condition: New
Quantity: 2 available
Add to basket3rd revised edition. 872 pages. 10.50x8.00x2.25 inches. In Stock.
Seller Inventory # x-1498733573
Acceptance Sampling in Quality Control, Third Edition presents the state of the art in the methodology of sampling while integrating both theory and best practices. It discusses various standards, including those from the ISO, MIL-STD and ASTM and explores how to set quality levels. The book also includes problems at the end of each chapter with solutions. This edition improves upon the previous editions especially in the areas of software applications and compliance sampling plans.
New to the Third Edition:
Dr. Edward G. Schilling was a professor emeritus of statistics at the Center for Quality and Applied Statistics, at Rochester Institute of Technology (RIT), where he had been the director of the center and the chair of the Graduate Statistics Department.
Before joining RIT, he was the manager of the lighting quality operation for the Lighting Business Group of General Electric Company. He received his BA and MBA from State University of New York (SUNY) at Buffalo, and his MS and PhD in statistics from Rutgers University. He had been on the faculties of SUNY at Buffalo, Rutgers University, and Case Western Reserve University. He had extensive industrial experience in quality engineering at Radio Corporation of America (RCA) and the Carborundum Co., and in statistical consulting and quality management at General Electric. Dr. Schilling was a fellow of the American Society for Quality (ASQ), the American Statistical Association (ASA), and the American Society for Testing and Materials (ASTM). He was also a member of the Institute of Mathematical Statistics and the American Economic Association. He was registered as a professional engineer in California and certified by ASQ as a quality and a reliability engineer. He served as the founding series editor for the Marcel Dekker series of books on quality and reliability, and published extensively in the field of quality
control and statistics.
Dr. Schilling was the Shewhart Medalist in 1983, the recipient of the E.L. Grant Award in 1999, the Freund–Marquardt Medal in 2005, and the Distinguished Service Medal in 2002; he was the first person to receive the Brumbaugh Award four times from the ASQ. He was also the recipient of the Ellis R. Ott Award in 1984 for his contributions to quality management from the Metropolitan New York Section of that society and was honored by being invited to present the 1986 W.J. Youden Memorial Address at the Joint ASQ/ASA Annual Fall Technical Conference. He was the recipient of the H.F. Dodge Award by the ASTM in 1993 and the Award of Merit in 2002.
Dr. Schilling was an associate editor of the fifth edition of Juran’s Quality Control Handbook. His book, Process Quality Control (with E.R. Ott and D.V. Neubauer), is among the leading texts in the field.
Dean V. Neubauer
is an Engineering Fellow in the Process Engineering Directorate in the Manufacturing, Technology and Engineering (MTE) Division at Corning Incorporated. He has worked for Corning since 1981 and has been involved in projects in every major business over this time. He has fifteen U.S. patents for compositional work on a variety of materials and devices for the manufacture of display glass. His background includes degrees in statistics from Iowa State University and Rochester Institute of Technology.Outside of Corning, Dean has taught as an Adjunct Professor in the M.S. program for the Center for Quality and Applied Statistics at R.I.T. since 1992. He also participates on the ASTM E-11 Committee on Quality and Statistics where he is a Past Chairman and is a member of the ASTM International Committee on Standards (COS). Dean is a book reviewer for the Technometrics and Journal of Quality Technology journals, serves on the Management Committee of the Technometrics journal, serves on the Editorial Board of the Quality Engineering journal, is the co-author of Process Quality Control, 4th Edition with the late Dr. Edward G. Schilling. He is also a former U.S. Lead Delegate to the ISO Technical Committee 69 on Statistical Methods Subcommittee SC5 on Acceptance Sampling. In this role, he was responsible for the review of ISO, as well as, ANSI/ASQ Z acceptance sampling standards.
Dean was elected a Fellow of the American Society for Quality (ASQ) in 2000 and is a Certified Quality Engineer. Dean is also a Past Chair of the ASQ’s Chemical and Process Industries Division and a Past Chair of the Corning-Elmira ASQ Section. He is a recipient of the 2003 Shewell Award from ASQ and the 2011 Harold F. Dodge Award from ASTM. He has also been a Member of the American Statistical Association since 1979 and is an accredited professional statistician (PStat™). In 1993, he was elected a Fellow of the Royal Statistical Society in London, England and holds the certification of Chartered Statistician (CStat). In 2010, he was given the Award of Merit carrying the title of Fellow from the American Society for Testing Materials (ASTM).
"About this title" may belong to another edition of this title.
Legal entity name: Edward Bowditch Ltd
Legal entity form: Limited company
Business correspondence address: Exstowe, Exton, Exeter, EX3 0PP
Company registration number: 04916632
VAT registration: GB834241546
Authorised representative: Mr. E. Bowditch
If you are a consumer you can cancel the contract in accordance with the following. Consumer means any natural person who is acting for purposes which are outside his trade, business, craft or profession.
INFORMATION REGARDING THE RIGHT OF CANCELLATION
Statutory Right to cancel
You have the right to cancel this contract within 14 days without giving any reason.
The cancellation period will expire after 14 days from the day on which you acquire, or a third party other than the carrier and indicated by you acquires, physical possession of the the last good or the last lot or piece.
To exercise the right to cancel, you must inform us, Revaluation Books, Exstowe, Exton, EX3 0PP, Exeter, United Kingdom, 44 1179083586, of your decision to cancel this contract by a clear statement (e.g. a letter sent by post, fax or e-mail). You may use the attached model cancellation form, but it is not obligatory. You can also electronically fill in and submit a clear statement on our website, under "My Purchases" in "My Account". If you use this option, we will communicate to you an acknowledgement of receipt of such a cancellation on a durable medium (e.g. by e-mail) without delay.
To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired.
Effects of cancellation
If you cancel this contract, we will reimburse to you all payments received from you, including the costs of delivery (except for the supplementary costs arising if you chose a type of delivery other than the least expensive type of standard delivery offered by us).
We may make a deduction from the reimbursement for loss in value of any goods supplied, if the loss is the result of unnecessary handling by you.
We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel with contract.
We will make the reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
We may withhold reimbursement until we have received the goods back or you have supplied evidence of having sent back the goods, whichever is the earliest.
You shall send back the goods or hand them over to us or Revaluation Books, Edward Bowditch Ltd, Clifton Heights, Triangle West, BS8 1EJ, Bristol, United Kingdom, 44 1179083586, without undue delay and in any event not later than 14 days from the day on which you communicate your cancellation from this contract to us. The deadline is met if you send back the goods before the period of 14 days has expired. You will have to bear the direct cost of returning the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods.
Exceptions to the right of cancellation
The right of cancellation does not apply to:
Model withdrawal form
(complete and return this form only if you wish to withdraw from the contract)
To: (Revaluation Books, Exstowe, Exton, EX3 0PP, Exeter, United Kingdom, 44 1179083586)
I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) contract of sale of the following goods (*)/for the provision of the following goods (*)/for the provision of the following service (*),
Ordered on (*)/received on (*)
Name of consumer(s)
Address of consumer(s)
Signature of consumer(s) (only if this form is notified on paper)
Date
* Delete as appropriate.
Orders usually dispatched within two working days.
| Order quantity | 2 to 3 business days | 7 to 14 business days |
|---|---|---|
| First item | £ 15.00 | £ 20.00 |
Delivery times are set by sellers and vary by carrier and location. Orders passing through Customs may face delays and buyers are responsible for any associated duties or fees. Sellers may contact you regarding additional charges to cover any increased costs to ship your items.