Print Reading Handbook For Construction: A Complete Guide to Drawings, Specifications and Documents - Softcover

FERRIS, DAVID J.

9798189361784: Print Reading Handbook For Construction: A Complete Guide to Drawings, Specifications and Documents

Softcover

ISBN 13: 9798189361784

Publisher: Independently published, 2026

View all copies of this ISBN edition

0 Used

1 New

From � 58.70

A door schedule calls out a ninety-minute fire rating. The written specification names the acceptable hardware. A structural beam leaves a mechanical duct nowhere to go. Which document is correct, and which one governs when two disagree? On a real jobsite these are not trick questions, they come up constantly, and a reader who cannot answer them confidently is only reading part of the story.
Print reading is rarely taught as a single, connected skill. Apprentices and journeymen typically learn it piecemeal, discipline by discipline, from whoever happens to be mentoring them on a given project, while construction management students often study project delivery and contract theory without ever tracing a real conflict between a drawing and a specification through to its resolution. The result is a common gap: a reader who can interpret one discipline's sheets well but hesitates the moment a note says "see structural," and who is never quite sure which document governs when the drawings and the written specifications do not agree.
This handbook closes that gap directly, one discipline at a time. Every chapter follows the same structure -- clear learning objectives, theory grounded in real industry practice, fully worked examples, and practice problems with complete worked answers -- so a reader practices each skill against realistic project scenarios rather than simply reading a definition of it.
Working through this handbook, readers will:

Learn the shared drafting conventions, scale, and symbol systems that make unfamiliar sheets legible from the first chapter on.
Navigate a full drawing set confidently, using its discipline-based organization to move from a cross-reference note to the actual sheet it points to.
Work fully solved examples calculating drainage direction, utility pipe slope, and setback and accessibility compliance from site and civil drawings.
Build matching fluency across architectural, structural, and building-systems drawings, tracing a single duct, pipe, or circuit run to its terminal point.
Apply bearing-pressure, fixture-unit, electrical-load, and occupant-load calculations against stated allowable values, the way an estimator or inspector checks them.
Understand how written specifications relate to the drawings, including which document governs when the two appear to conflict.
Practice writing a request for information that names a specific location, cites the conflicting values, and proposes a resolution, rather than simply flagging that a conflict exists.

Key subjects covered include construction document anatomy and delivery methods, drafting fundamentals, sheet-set organization, site and civil drawings, architectural plans and interior finishes, structural drawings and detailing, mechanical, plumbing, and electrical drawings, written specifications, and full-set field coordination with a consistent set of numbered symbols and terms collected in a full back-matter symbols list and glossary.
This handbook is written for construction apprentices and journeymen who need to read prints accurately in the field, for construction management students connecting a drawing set's technical content to the contractual framework behind it, and for estimators, superintendents, project engineers, and inspectors who coordinate across every discipline on a live project.
Stop guessing which document governs. Begin working through this handbook discipline by discipline, and build the print-reading skill a real project actually demands.

"synopsis" may belong to another edition of this title.