INDUSTRIAL ELECTRICAL TROUBLESHOOTING HANDBOOK: A Practical Guide to Diagnosing and Repairing Motors, Controls, and Power Systems - Softcover

Edward, Kelvin

Softcover

ISBN 13: 9798188648367

Publisher: Independently published, 2026

Synopsis

A production line goes down. A crew gathers around a motor control center with meters in hand, swapping parts on a hunch because nobody in the room can trace the fault back to its actual cause. Hours pass, and the bill for downtime climbs faster than the bill for parts ever could. This handbook exists to put a stop to that kind of guesswork by building a single, transferable troubleshooting method for industrial electrical work.
Technical training often teaches individual skills in isolation — reading a meter, replacing a starter, resetting a drive — without connecting them into one method for tracing a fault from first symptom to root cause. This handbook closes that gap, moving from electrical safety practice, lockout/tagout procedure, and test instruments through reading prints and schematics, power distribution, overcurrent protection, and grounding and bonding, then into AC motors, motor control circuits, variable-frequency drives, motor control centers, programmable logic controllers, and sensors and instrumentation, before covering power quality, insulation and cable faults, emergency and standby power, preventive and predictive maintenance, and a closing set of root-cause case studies drawn from real industrial faults.
With this handbook, you will be able to:

• Apply a consistent, transferable troubleshooting method to any industrial electrical system, rather than relearning an approach for every new piece of equipment.
• Work safely under proper lockout/tagout procedure and electrical safety practice before a single meter lead ever touches a circuit.
• Read prints, wiring diagrams, and control schematics fast enough to trace a fault through an unfamiliar system under real time pressure.
• Diagnose AC motor, motor-control-circuit, and variable-frequency-drive faults using structured, repeatable diagnostic steps.
• Trace grounding, bonding, insulation, cable, and power-quality problems back to their actual root cause instead of the nearest visible symptom.
• Apply programmable logic controller and instrumentation fundamentals directly to real control-system troubleshooting.
• Build a preventive and predictive maintenance approach that catches failures before they become emergency calls.

Coverage spans electrical safety and lockout/tagout, test instruments, reading prints and schematics, power distribution, overcurrent protection, grounding and bonding, AC motors, motor control circuits, variable-frequency drives, motor control centers, programmable logic controllers, sensors and instrumentation, power quality, insulation and cable faults, emergency and standby power, and preventive and predictive maintenance and root-cause analysis — eighteen chapters in total, moving from foundational safety and instrumentation through every major system a technician is called to diagnose.
This handbook is written for industrial electrical and maintenance technicians at any stage of their careers — building foundational troubleshooting skill, refining it, or training others on the maintenance team — along with technical-program students and instructors assembling a dependable, method-driven reference for diagnosing and repairing motors, controls, and power systems.
Add this practical, method-driven reference to your toolbox and start tracing faults back to their actual cause, call after call.

Edition details

• Publisher: Independently published
• Publication date: 2026
• Language: English
• ISBN 13: 9798188648367
• Binding: Paperback
• Number of pages: 422