Gypsum & Drywall Systems Fundamentals: Design, Installation, and Code Compliance for Builders, Architects, and Inspectors - Softcover

Consalvi, Bradley T.; Press, The Kael Engineering

Softcover

ISBN 13: 9798175915434

Publisher: Independently published, 2026

Synopsis

A framer, a finisher, an architect, and a code inspector can all be working on the same wall on the same day — and each one is often relying on a different piece of technical guidance that does not quite agree with the others. Product data sheets, trade bulletins, model building codes, and referenced standards are published on separate schedules by separate organizations, leaving even experienced professionals reconciling conflicting fastening schedules, mismatched fire-rating assumptions, and outdated product references in the field.

This handbook was written to close that gap. Rather than organizing around a single supplier's catalog, it brings gypsum board, veneer plaster, backerboard, framing, finishing, plaster, and acoustical ceiling systems into one sequenced reference — moving from material selection through engineering, installation, and final inspection so the correct answer can be found quickly and applied with confidence.

With this handbook, you will be able to:

• Select the correct gypsum board, veneer plaster product, or backerboard for a documented fire, moisture, sound, or abuse-resistance requirement


• Design and detail wood and steel framing for deflection, load, and assembly performance, including curved walls, chase walls, and suspended-ceiling grillage


• Sequence drywall, veneer-base, and backerboard installation correctly, including moisture-sensitive and wet-area work


• Apply all recognized drywall finish levels and complete veneer plaster and conventional plaster finishing to the intended standard


• Evaluate and verify fire-rated and sound-rated assemblies, shaft walls, and acoustical ceiling systems against documented performance data


• Diagnose common drywall, finish, and plaster defects using a structured cause-remedy-prevention approach


• Plan projects, sequence inspections, and apply current safety, material-handling, and sustainability practices on real job sites

Key topics include gypsum panel and veneer plaster product selection, cross-trade coordination, wood and steel framing, cladding and backerboard installation, drywall and plaster finishing, conventional plaster applications, acoustical ceiling design, system design considerations, planning and inspection, jobsite problem diagnosis, safety, tools and equipment, building science, sustainability, and an overview of the modern gypsum materials market — supported by a design-listing quick-reference index, a standards index, a master fastener and spacing schedule, a glossary, a jurisdiction code-adoption reference, and a practice examination.

This handbook is written for contractors, installers, material dealers, architects, engineers, apprentices, and code inspectors who need accurate procedures, current performance data, and a clear distinction between code minimums and industry best practice — whether confirming a fastening schedule in the field, specifying an assembly at the design table, preparing for a licensing or certification examination, or verifying an installation against governing code.

Open this handbook and start reconciling the fastening schedules, fire-rating assumptions, and installation sequences your next project depends on — with one consistent, field-ready reference in place of a stack of conflicting data sheets.

Edition details

• Publisher: Independently published
• Publication date: 2026
• Language: English
• ISBN 13: 9798175915434
• Binding: Paperback
• Number of pages: 211