Items related to Finite Element Analysis on Machining of Magnesium Alloys
Synopsis
Force measurement in metal cutting is an essential requirement as it is related to machine part design, tool design, power consumptions, vibrations, part accuracy, etc. It is the purpose of the measurement of cutting force to be able to understand the cutting mechanism such as the effects of cutting variables on the cutting force, the mach inability of the work piece, the process of chip formation, chatter and tool wear. This project presents a simulation model for estimation of cutting forces in turning process. A 3D simulation model was used for predicting the cutting forces as it is more nearer to practical process than the two dimensional model, although computing time is very large for a 3D model. A 3D model for oblique cutting is used and model to analyze turning of MAGNESIUM ZE41A using a HSS inserts was developed using ANSYS software. The finite element analysis incorporated the elastic and plastic properties of the work material in machining and Johnson-cook model is used for cutting simulation. The results from simulation model were compared with experimental data. It is found that simulation results were in good agreement with experimental results.
"synopsis" may belong to another edition of this title.
Search results for Finite Element Analysis on Machining of Magnesium Alloys
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Softcover
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. In. Seller Inventory # ria9786208011833_new
Quantity: Over 20 available
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys (Paperback)
Published by
LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Paperback
Seller: CitiRetail, Stevenage, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. Force measurement in metal cutting is an essential requirement as it is related to machine part design, tool design, power consumptions, vibrations, part accuracy, etc. It is the purpose of the measurement of cutting force to be able to understand the cutting mechanism such as the effects of cutting variables on the cutting force, the mach inability of the work piece, the process of chip formation, chatter and tool wear. This project presents a simulation model for estimation of cutting forces in turning process. A 3D simulation model was used for predicting the cutting forces as it is more nearer to practical process than the two dimensional model, although computing time is very large for a 3D model. A 3D model for oblique cutting is used and model to analyze turning of MAGNESIUM ZE41A using a HSS inserts was developed using ANSYS software. The finite element analysis incorporated the elastic and plastic properties of the work material in machining and Johnson-cook model is used for cutting simulation. The results from simulation model were compared with experimental data. It is found that simulation results were in good agreement with experimental results. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability. Seller Inventory # 9786208011833
Quantity: 1 available
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Softcover
Seller: California Books, Miami, FL, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # I-9786208011833
Quantity: Over 20 available
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
Omniscriptum, LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Force measurement in metal cutting is an essential requirement as it is related to machine part design, tool design, power consumptions, vibrations, part accuracy, etc. It is the purpose of the measurement of cutting force to be able to understand the cutting mechanism such as the effects of cutting variables on the cutting force, the mach inability of the work piece, the process of chip formation, chatter and tool wear. This project presents a simulation model for estimation of cutting forces in turning process. A 3D simulation model was used for predicting the cutting forces as it is more nearer to practical process than the two dimensional model, although computing time is very large for a 3D model. A 3D model for oblique cutting is used and model to analyze turning of MAGNESIUM ZE41A using a HSS inserts was developed using ANSYS software. The finite element analysis incorporated the elastic and plastic properties of the work material in machining and Johnson-cook model is used for cutting simulation. The results from simulation model were compared with experimental data. It is found that simulation results were in good agreement with experimental results. 60 pp. Englisch. Seller Inventory # 9786208011833
Quantity: 2 available
Seller Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP LAMBERT Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Force measurement in metal cutting is an essential requirement as it is related to machine part design, tool design, power consumptions, vibrations, part accuracy, etc. It is the purpose of the measurement of cutting force to be able to understand the cutting mechanism such as the effects of cutting variables on the cutting force, the mach inability of the work piece, the process of chip formation, chatter and tool wear. This project presents a simulation model for estimation of cutting forces in turning process. A 3D simulation model was used for predicting the cutting forces as it is more nearer to practical process than the two dimensional model, although computing time is very large for a 3D model. A 3D model for oblique cutting is used and model to analyze turning of MAGNESIUM ZE41A using a HSS inserts was developed using ANSYS software. The finite element analysis incorporated the elastic and plastic properties of the work material in machining and Johnson-cook model is used for cutting simulation. The results from simulation model were compared with experimental data. It is found that simulation results were in good agreement with experimental results. Seller Inventory # 9786208011833
Quantity: 1 available
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Softcover
Seller: Best Price, Torrance, CA, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. SUPER FAST SHIPPING. Seller Inventory # 9786208011833
Quantity: 2 available
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Softcover
Seller: Majestic Books, Hounslow, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. Print on Demand. Seller Inventory # 410067223
Quantity: 4 available
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Softcover
Seller: Books Puddle, New York, NY, U.S.A.
Seller rating 4 out of 5 stars
Condition: New. Seller Inventory # 26403087048
Quantity: 4 available
Stock Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP Lambert Academic Publishing, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Softcover
Seller: Biblios, Frankfurt am main, HESSE, Germany
Seller rating 5 out of 5 stars
Condition: New. PRINT ON DEMAND. Seller Inventory # 18403087042
Quantity: 4 available
Seller Image
Finite Element Analysis on Machining of Magnesium Alloys
Published by
LAP LAMBERT Academic Publishing Aug 2024, 2024
ISBN 10: 6208011833
ISBN 13: 9786208011833
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Neuware -Force measurement in metal cutting is an essential requirement as it is related to machine part design, tool design, power consumptions, vibrations, part accuracy, etc. It is the purpose of the measurement of cutting force to be able to understand the cutting mechanism such as the effects of cutting variables on the cutting force, the mach inability of the work piece, the process of chip formation, chatter and tool wear. This project presents a simulation model for estimation of cutting forces in turning process. A 3D simulation model was used for predicting the cutting forces as it is more nearer to practical process than the two dimensional model, although computing time is very large for a 3D model. A 3D model for oblique cutting is used and model to analyze turning of MAGNESIUM ZE41A using a HSS inserts was developed using ANSYS software. The finite element analysis incorporated the elastic and plastic properties of the work material in machining and Johnson-cook model is used for cutting simulation. The results from simulation model were compared with experimental data. It is found that simulation results were in good agreement with experimental results.Books on Demand GmbH, Überseering 33, 22297 Hamburg 60 pp. Englisch. Seller Inventory # 9786208011833
Quantity: 2 available