Effect of Friction Stir Processing on Spray Formed Al-Si Alloy: Effect of FSP on Spray Formed Al-Si Alloy - Softcover
Synopsis
In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al–6Si-5Gr, Al-12Si-5Gr and Al–18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP.
"synopsis" may belong to another edition of this title.
Search results for Effect of Friction Stir Processing on Spray Formed...
Seller Image
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy
Published by
LAP LAMBERT Academic Publishing Jan 2021, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al-6Si-5Gr, Al-12Si-5Gr and Al-18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP. 68 pp. Englisch. Seller Inventory # 9786203303056
Seller Image
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy
Published by
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Bajpai AbhijeetProf. Abhijeet Bajpai graduated from REC, Rewa, M.P, India. He obtained his MTech from IIT, Roorkee, India.Dr Devendra Singh obtained his B. Tech, MTech & Ph.D. degree from IIT, Kanpur, India.Dr Raj Kumar Singh graduat. Seller Inventory # 452579491
Buy New
£ 30.18
£ 41.91 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy
Published by
LAP LAMBERT Academic Publishing Jan 2021, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al-6Si-5Gr, Al-12Si-5Gr and Al-18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 68 pp. Englisch. Seller Inventory # 9786203303056
Seller Image
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy : Effect of FSP on Spray Formed Al-Si Alloy
Published by
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al-6Si-5Gr, Al-12Si-5Gr and Al-18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP. Seller Inventory # 9786203303056
Seller Image
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy | Effect of FSP on Spray Formed Al-Si Alloy
Published by
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Effect of Friction Stir Processing on Spray Formed Al-Si Alloy | Effect of FSP on Spray Formed Al-Si Alloy | Abhijeet Bajpai (u. a.) | Taschenbuch | Englisch | 2021 | LAP LAMBERT Academic Publishing | EAN 9786203303056 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 119667651