Improving The Controlling System of A Finger Simulator: Research work has been performed on the lab facilities of Biomedical Engineering Department at Newcastle University, UK - Softcover
Synopsis
Recently, different kinds of small, programmable and less energy consuming circuit boards have been used to run various electronic projects or systems. Additionally these small circuit boards are also valid for controlling the applications of the simulators. The School of Mechanical & Systems Engineering of Newcastle University, currently, is in possession of four pneumatic simulators which was previously used to test finger prostheses. Each rig has conducted in the vicinity of one hundred million cycles of flexion and extension. The aim of this project is to improve the design of controlling the finger simulator by using a programmable circuit board (Arduino Uno Rev3). The project has been divided into three different categories, designing, making and testing. The control simulator will be unmodified to allow back to back benchmark testing. The designing procedure has been separated in several sections as, designing the circuit board, proper wire connection with the simulator and a 25V power supply. Along that, an Arduino IDE (Integrated Development Environment) software has been used to compile some programs related to the micro-controller ATmega328p.
"synopsis" may belong to another edition of this title.
About the Author
Md. Nasfikur R. Khan has completed B.Sc. in EEE from SHU, United Kingdom and M.Sc. degree in Biomedical Engineering from Newcastle University, UK in 2014 & 2015, respectively. He is involved as a research associate of AIMS Lab,UIU and appointed as a Lecture of Independent University, BD. He is working on several biomedical and automation projects.
"About this title" may belong to another edition of this title.
Search results for Improving The Controlling System of A Finger Simulator:...
Seller Image
Improving The Controlling System of A Finger Simulator
Published by
Scholars' Press Dez 2017, 2017
ISBN 10: 6202303794
ISBN 13: 9786202303798
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Recently, different kinds of small, programmable and less energy consuming circuit boards have been used to run various electronic projects or systems. Additionally these small circuit boards are also valid for controlling the applications of the simulators. The School of Mechanical & Systems Engineering of Newcastle University, currently, is in possession of four pneumatic simulators which was previously used to test finger prostheses. Each rig has conducted in the vicinity of one hundred million cycles of flexion and extension. The aim of this project is to improve the design of controlling the finger simulator by using a programmable circuit board (Arduino Uno Rev3). The project has been divided into three different categories, designing, making and testing. The control simulator will be unmodified to allow back to back benchmark testing. The designing procedure has been separated in several sections as, designing the circuit board, proper wire connection with the simulator and a 25V power supply. Along that, an Arduino IDE (Integrated Development Environment) software has been used to compile some programs related to the micro-controller ATmega328p. 56 pp. Englisch. Seller Inventory # 9786202303798
Stock Image
Improving The Controlling System of A Finger Simulator
Seller: Books Puddle, New York, NY, U.S.A.
Seller rating 4 out of 5 stars
Condition: New. pp. 56. Seller Inventory # 26375972704
Stock Image
Improving The Controlling System of A Finger Simulator
Print on DemandSeller: Majestic Books, Hounslow, United Kingdom
Seller rating 4 out of 5 stars
Condition: New. Print on Demand pp. 56. Seller Inventory # 371154111
Buy New
£ 61.79
£ 6.50 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 4 available
Stock Image
Improving The Controlling System of A Finger Simulator
Print on DemandSeller: Biblios, Frankfurt am main, HESSE, Germany
Seller rating 4 out of 5 stars
Condition: New. PRINT ON DEMAND pp. 56. Seller Inventory # 18375972714
Seller Image
Improving The Controlling System of A Finger Simulator
Print on DemandSeller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Khan Md. Nasfikur R.Md. Nasfikur R. Khan has completed B.Sc. in EEE from SHU, United Kingdom and M.Sc. degree in Biomedical Engineering from Newcastle University, UK in 2014 & 2015, respectively. He is involved as a research associat. Seller Inventory # 385940700
Buy New
£ 34.58
£ 42.46 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Stock Image
Improving The Controlling System of A Finger Simulator: Research work has been performed on the lab facilities of Biomedical Engineering Department at Newcastle University, UK
Seller: Revaluation Books, Exeter, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Brand New. 56 pages. 8.66x5.91x0.13 inches. In Stock. Seller Inventory # zk6202303794
Buy New
£ 68.59
£ 10 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Seller Image
Improving The Controlling System of A Finger Simulator
Published by
Scholars' Press Dez 2017, 2017
ISBN 10: 6202303794
ISBN 13: 9786202303798
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Recently, different kinds of small, programmable and less energy consuming circuit boards have been used to run various electronic projects or systems. Additionally these small circuit boards are also valid for controlling the applications of the simulators. The School of Mechanical & Systems Engineering of Newcastle University, currently, is in possession of four pneumatic simulators which was previously used to test finger prostheses. Each rig has conducted in the vicinity of one hundred million cycles of flexion and extension. The aim of this project is to improve the design of controlling the finger simulator by using a programmable circuit board (Arduino Uno Rev3). The project has been divided into three different categories, designing, making and testing. The control simulator will be unmodified to allow back to back benchmark testing. The designing procedure has been separated in several sections as, designing the circuit board, proper wire connection with the simulator and a 25V power supply. Along that, an Arduino IDE (Integrated Development Environment) software has been used to compile some programs related to the micro-controller ATmega328p.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 56 pp. Englisch. Seller Inventory # 9786202303798
Seller Image
Improving The Controlling System of A Finger Simulator : Research work has been performed on the lab facilities of Biomedical Engineering Department at Newcastle University, UK
Print on DemandSeller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Recently, different kinds of small, programmable and less energy consuming circuit boards have been used to run various electronic projects or systems. Additionally these small circuit boards are also valid for controlling the applications of the simulators. The School of Mechanical & Systems Engineering of Newcastle University, currently, is in possession of four pneumatic simulators which was previously used to test finger prostheses. Each rig has conducted in the vicinity of one hundred million cycles of flexion and extension. The aim of this project is to improve the design of controlling the finger simulator by using a programmable circuit board (Arduino Uno Rev3). The project has been divided into three different categories, designing, making and testing. The control simulator will be unmodified to allow back to back benchmark testing. The designing procedure has been separated in several sections as, designing the circuit board, proper wire connection with the simulator and a 25V power supply. Along that, an Arduino IDE (Integrated Development Environment) software has been used to compile some programs related to the micro-controller ATmega328p. Seller Inventory # 9786202303798
Seller Image
Improving The Controlling System of A Finger Simulator | Research work has been performed on the lab facilities of Biomedical Engineering Department at Newcastle University, UK
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Improving The Controlling System of A Finger Simulator | Research work has been performed on the lab facilities of Biomedical Engineering Department at Newcastle University, UK | Md. Nasfikur R. Khan (u. a.) | Taschenbuch | 56 S. | Englisch | 2017 | Scholars' Press | EAN 9786202303798 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 110794355