Simulation and Control of Instationary Reactive Flows in Matrix Burner for Small Power Gas Turbine Applications - Softcover
Search results for Simulation and Control of Instationary Reactive Flows...
Seller Image
Simulation and Control of Instationary Reactive Flows in Matrix Burner for Small Power Gas Turbine Applications
Print on DemandSeller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The main objective of this thesis is to analyze combustion instabilities in a matrixburner. The various tools that exist for analyzing thermoacoustic instabilities are applied to the matrix burner with multiple flames. The principal goals are to determine the primary causes of combustion instabilities in the burner and to explore ways of controlling such instabilities in order to prevent damage to the burner. To achieve these goals, the stability map of the burner obtained from measurements is analyzed. This is followed by the analysis of the aerodynamics of the cold flow using CFD. Results obtained from CFD are validated with PIV and LDA results from measurements. Critical are the centerline axial velocity inside the combustion chamber and the recirculation zones on the walls of the combustion chamber and those between the various slots of the matrix burner. Cold flow simulations are followed by reactive flow simulations for both gaseous and liquid fuels. A detailed atomization model is developed for the liquid fuel case from experimental data. Two combustion models, namely, the combined finite rate/eddy dissipation model and the finite rate chemistry model are compared in the CFD simulations of combustion instabilities and validation with measurements are done. The latter is chosen over the former because it accounts for chemistry and it is not numerically dissipative. Two CFD softwares, Fluent and CFX are also compared to determine which is better at capturing acoustics. System identification using CFD is used to determine the flame transfer function and the acoustic transfer matrix. This is followed by the use of acoustic forcing and fuel modulation on the primary and pilot in order to limit the amplitude of the instabilities inside the matrix burner combustor. The 1D acoustic network is used to determine the longitudinal eigenmodes of the matrix burner. This is followed by the use of 3D finite element method (FEM) and fluid-structure interaction (FSI) to determine whether a coupling exist between the fluid and structure of the matrix burner combustor and vice versa. Finally, Full harmonic analysis is performed for the rectangular combustor and the results obtained are validated with analytical results. This is followed by the 3D structure modal analysis of the full matrix burner test rig. 186 pp. Englisch. Seller Inventory # 9783954040018
Seller Image
Simulation and Control of Instationary Reactive Flows in Matrix Burner for Small Power Gas Turbine Applications
Published by
Jentzsch-Cuvillier, Annette, 2012
ISBN 10: 3954040018
ISBN 13: 9783954040018
New
Kartoniert / Broschiert
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Kartoniert / Broschiert. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. KlappentextrnrnThe main objective of this thesis is to analyze combustion instabilities in a matrixnburner. The various tools that exist for analyzing thermoacoustic instabilities arenapplied to the matrix burner with multiple flames. The princi. Seller Inventory # 118877332
Buy New
£ 32.11
£ 41.78 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Simulation and Control of Instationary Reactive Flows in Matrix Burner for Small Power Gas Turbine Applications
Published by
Cuvillier, Cuvillier Feb 2012, 2012
ISBN 10: 3954040018
ISBN 13: 9783954040018
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The main objective of this thesis is to analyze combustion instabilities in a matrixburner. The various tools that exist for analyzing thermoacoustic instabilities areapplied to the matrix burner with multiple flames. The principal goals are to determinethe primary causes of combustion instabilities in the burner and to exploreways of controlling such instabilities in order to prevent damage to the burner.To achieve these goals, the stability map of the burner obtained from measurementsis analyzed. This is followed by the analysis of the aerodynamics of the cold flowusing CFD. Results obtained from CFD are validated with PIV and LDA resultsfrom measurements. Critical are the centerline axial velocity inside the combustionchamber and the recirculation zones on the walls of the combustion chamber andthose between the various slots of the matrix burner.Cold flow simulations are followed by reactive flow simulations for both gaseous andliquid fuels. A detailed atomization model is developed for the liquid fuel case fromexperimental data. Two combustion models, namely, the combined finite rate/eddydissipation model and the finite rate chemistry model are compared in the CFDsimulations of combustion instabilities and validation with measurements are done.The latter is chosen over the former because it accounts for chemistry and it is notnumerically dissipative. Two CFD softwares, Fluent and CFX are also compared todetermine which is better at capturing acoustics. System identification using CFDis used to determine the flame transfer function and the acoustic transfer matrix.This is followed by the use of acoustic forcing and fuel modulation on the primaryand pilot in order to limit the amplitude of the instabilities inside the matrix burnercombustor.The 1D acoustic network is used to determine the longitudinal eigenmodes of thematrix burner. This is followed by the use of 3D finite element method (FEM) andfluid-structure interaction (FSI) to determine whether a coupling exist between thefluid and structure of the matrix burner combustor and vice versa.Finally, Full harmonic analysis is performed for the rectangular combustor and theresults obtained are validated with analytical results. This is followed by the 3Dstructure modal analysis of the full matrix burner test rig.Cuvillier Verlag, Nonnenstieg 8, 37075 Göttingen 186 pp. Englisch. Seller Inventory # 9783954040018
Seller Image
Simulation and Control of Instationary Reactive Flows in Matrix Burner for Small Power Gas Turbine Applications
Print on DemandSeller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The main objective of this thesis is to analyze combustion instabilities in a matrixburner. The various tools that exist for analyzing thermoacoustic instabilities are applied to the matrix burner with multiple flames. The principal goals are to determine the primary causes of combustion instabilities in the burner and to explore ways of controlling such instabilities in order to prevent damage to the burner. To achieve these goals, the stability map of the burner obtained from measurements is analyzed. This is followed by the analysis of the aerodynamics of the cold flow using CFD. Results obtained from CFD are validated with PIV and LDA results from measurements. Critical are the centerline axial velocity inside the combustion chamber and the recirculation zones on the walls of the combustion chamber and those between the various slots of the matrix burner. Cold flow simulations are followed by reactive flow simulations for both gaseous and liquid fuels. A detailed atomization model is developed for the liquid fuel case from experimental data. Two combustion models, namely, the combined finite rate/eddy dissipation model and the finite rate chemistry model are compared in the CFD simulations of combustion instabilities and validation with measurements are done. The latter is chosen over the former because it accounts for chemistry and it is not numerically dissipative. Two CFD softwares, Fluent and CFX are also compared to determine which is better at capturing acoustics. System identification using CFD is used to determine the flame transfer function and the acoustic transfer matrix. This is followed by the use of acoustic forcing and fuel modulation on the primary and pilot in order to limit the amplitude of the instabilities inside the matrix burner combustor. The 1D acoustic network is used to determine the longitudinal eigenmodes of the matrix burner. This is followed by the use of 3D finite element method (FEM) and fluid-structure interaction (FSI) to determine whether a coupling exist between the fluid and structure of the matrix burner combustor and vice versa. Finally, Full harmonic analysis is performed for the rectangular combustor and the results obtained are validated with analytical results. This is followed by the 3D structure modal analysis of the full matrix burner test rig. Seller Inventory # 9783954040018
Seller Image
Simulation and Control of Instationary Reactive Flows in Matrix Burner for Small Power Gas Turbine Applications
Print on DemandSeller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Simulation and Control of Instationary Reactive Flows in Matrix Burner for Small Power Gas Turbine Applications | James Fayiah Willie | Taschenbuch | Englisch | 2012 | Cuvillier | EAN 9783954040018 | Verantwortliche Person für die EU: Cuvillier Verlag, Nonnenstieg 8, 37075 Göttingen, info[at]cuvillier[dot]de | Anbieter: preigu Print on Demand. Seller Inventory # 121685487