Items related to The Use Of Cold Sprayed Alloys For Metallic Stents
Synopsis
1- This study shows the ability to successfully cold-spray 316L stainless steel using nitrogen and helium as a propellant gas. The microstructure was characterized with low porosity and fine grain structure. In addition, after post-processing heat treatment, the microstructure became denser (i.e. lower porosity). The microhardness did not change with 400°C annealing temperature but decreased significantly at 800°C, which can be explained by the recrystallization that occurs during cold-spraying. Both the ductility and strength were improved after annealing at 1100°C, in particular. 2- This study shows the ability to successfully cold-spray composite 316L-CoCr using nitrogen as a propellant gas with Co-Cr volume fractions (i.e. 25%, 33.3%). The deposition efficiency decreased with increasing the amount of Co-Cr. The microstructure is characterized by low porosity level in the first two mixes. At 50% as mixed Co-Cr and 316L, the actual as coated material was 33% Co-Cr, due to difficulties in bonding Co-Cr particles to each other. Thus, the porosity was high at the 50% mixture and cracks were also apparent.
"synopsis" may belong to another edition of this title.
About the Author
Bandar Abdulaziz AlMangour,PhD Candidate in UCLA, Materials science and Engineering,M.Eng, McGill university, Materials Engineering, 2012 Research interests: understanding of the structure-property relationships, simulation & characterization of advanced structural metals in particular nanostructured alloys, manufacturing and materials processing
"About this title" may belong to another edition of this title.
Search results for The Use Of Cold Sprayed Alloys For Metallic Stents
Seller Image
The Use Of Cold Sprayed Alloys For Metallic Stents
Published by
LAP LAMBERT Academic Publishing Feb 2014, 2014
ISBN 10: 3848421577
ISBN 13: 9783848421572
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -1- This study shows the ability to successfully cold-spray 316L stainless steel using nitrogen and helium as a propellant gas. The microstructure was characterized with low porosity and fine grain structure. In addition, after post-processing heat treatment, the microstructure became denser (i.e. lower porosity). The microhardness did not change with 400°C annealing temperature but decreased significantly at 800°C, which can be explained by the recrystallization that occurs during cold-spraying. Both the ductility and strength were improved after annealing at 1100°C, in particular. 2- This study shows the ability to successfully cold-spray composite 316L-CoCr using nitrogen as a propellant gas with Co-Cr volume fractions (i.e. 25%, 33.3%). The deposition efficiency decreased with increasing the amount of Co-Cr. The microstructure is characterized by low porosity level in the first two mixes. At 50% as mixed Co-Cr and 316L, the actual as coated material was 33% Co-Cr, due to difficulties in bonding Co-Cr particles to each other. Thus, the porosity was high at the 50% mixture and cracks were also apparent. 112 pp. Englisch. Seller Inventory # 9783848421572
Seller Image
The Use Of Cold Sprayed Alloys For Metallic Stents
Published by
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3848421577
ISBN 13: 9783848421572
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Almangour BandarBandar Abdulaziz AlMangour,PhD Candidate in UCLA, Materials science and Engineering,M.Eng, McGill university, Materials Engineering, 2012 Research interests: understanding of the structure-property relationships, sim. Seller Inventory # 5520998
Buy New
£ 39.01
£ 40.83 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
The Use Of Cold Sprayed Alloys For Metallic Stents
Published by
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3848421577
ISBN 13: 9783848421572
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - 1- This study shows the ability to successfully cold-spray 316L stainless steel using nitrogen and helium as a propellant gas. The microstructure was characterized with low porosity and fine grain structure. In addition, after post-processing heat treatment, the microstructure became denser (i.e. lower porosity). The microhardness did not change with 400°C annealing temperature but decreased significantly at 800°C, which can be explained by the recrystallization that occurs during cold-spraying. Both the ductility and strength were improved after annealing at 1100°C, in particular. 2- This study shows the ability to successfully cold-spray composite 316L-CoCr using nitrogen as a propellant gas with Co-Cr volume fractions (i.e. 25%, 33.3%). The deposition efficiency decreased with increasing the amount of Co-Cr. The microstructure is characterized by low porosity level in the first two mixes. At 50% as mixed Co-Cr and 316L, the actual as coated material was 33% Co-Cr, due to difficulties in bonding Co-Cr particles to each other. Thus, the porosity was high at the 50% mixture and cracks were also apparent. Seller Inventory # 9783848421572
Seller Image
The Use Of Cold Sprayed Alloys For Metallic Stents
Published by
LAP LAMBERT Academic Publishing Feb 2014, 2014
ISBN 10: 3848421577
ISBN 13: 9783848421572
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -1- This study shows the ability to successfully cold-spray 316L stainless steel using nitrogen and helium as a propellant gas. The microstructure was characterized with low porosity and fine grain structure. In addition, after post-processing heat treatment, the microstructure became denser (i.e. lower porosity). The microhardness did not change with 400°C annealing temperature but decreased significantly at 800°C, which can be explained by the recrystallization that occurs during cold-spraying. Both the ductility and strength were improved after annealing at 1100°C, in particular. 2- This study shows the ability to successfully cold-spray composite 316L-CoCr using nitrogen as a propellant gas with Co-Cr volume fractions (i.e. 25%, 33.3%). The deposition efficiency decreased with increasing the amount of Co-Cr. The microstructure is characterized by low porosity level in the first two mixes. At 50% as mixed Co-Cr and 316L, the actual as coated material was 33% Co-Cr, due to difficulties in bonding Co-Cr particles to each other. Thus, the porosity was high at the 50% mixture and cracks were also apparent.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 112 pp. Englisch. Seller Inventory # 9783848421572
Seller Image
The Use Of Cold Sprayed Alloys For Metallic Stents
Published by
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3848421577
ISBN 13: 9783848421572
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. The Use Of Cold Sprayed Alloys For Metallic Stents | Bandar Almangour | Taschenbuch | 112 S. | Englisch | 2014 | LAP LAMBERT Academic Publishing | EAN 9783848421572 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 105436352