Synopsis
The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plastic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.
"synopsis" may belong to another edition of this title.
About the Author
Rupinder Singh is working as an Associate Professor in Department of Production Engineering at Guru Nanak Dev Engineering College, Ludhiana, India. He has contributed about 140 research papers in journals, workshops and conferences at national/ international level. He has supervised 35 M.Tech theses.
"About this title" may belong to another edition of this title.
Search results for PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC...
Seller Image
PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS
Published by
LAP LAMBERT Academic Publishing Dez 2010, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plastic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time. 76 pp. Englisch. Seller Inventory # 9783843387354
Stock Image
Process Capability of Rapid Manufacturing for Plastic Components
Published by
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Softcover
Seller: Books Puddle, New York, NY, U.S.A.
Seller rating 4 out of 5 stars
Condition: New. pp. 76. Seller Inventory # 26128834114
Stock Image
Process Capability of Rapid Manufacturing for Plastic Components
Published by
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Softcover
Seller: Majestic Books, Hounslow, United Kingdom
Seller rating 4 out of 5 stars
Condition: New. Print on Demand pp. 76 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam. Seller Inventory # 131753373
Buy New
£ 66.72
£ 6.50 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 4 available
Stock Image
Process Capability of Rapid Manufacturing for Plastic Components
Published by
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Softcover
Seller: Biblios, Frankfurt am main, HESSE, Germany
Seller rating 4 out of 5 stars
Condition: New. PRINT ON DEMAND pp. 76. Seller Inventory # 18128834120
Seller Image
PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS
Published by
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Singh RupinderRupinder Singh is working as an Associate Professor in Department of Production Engineering at Guru Nanak Dev Engineering College, Ludhiana, India. He has contributed about 140 research papers in journals, workshops . Seller Inventory # 5468573
Buy New
£ 36.56
£ 42.37 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS
Published by
LAP LAMBERT Academic Publishing Dez 2010, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plastic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 76 pp. Englisch. Seller Inventory # 9783843387354
Seller Image
PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS : SILICON MOULDING
Published by
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The purpose of the present study is to experimentally investigate rapid moulding solutions for plastic components using silicon moluding process. Starting from the identification of component, prototypes with two different types of plastic materials were produced under different vacuum moulding conditions. Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the plastic components produced. Some important mechanical properties were also compared to verify the suitability of the components. The study highlighted the process capability of silicon moulding process in terms dimensional accuracy for plastic components. Final components produced are acceptable as per IS standard (UNI EN 20286-I (1995) also according DIN 16901 standards for plastics. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time. Seller Inventory # 9783843387354
Seller Image
PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS | SILICON MOULDING
Published by
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS | SILICON MOULDING | Rupinder Singh (u. a.) | Taschenbuch | 76 S. | Englisch | 2010 | LAP LAMBERT Academic Publishing | EAN 9783843387354 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 107163958
Stock Image
PROCESS CAPABILITY OF RAPID MANUFACTURING FOR PLASTIC COMPONENTS: SILICON MOULDING
Published by
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3843387354
ISBN 13: 9783843387354
Used
Paperback
Seller: Mispah books, Redhill, SURRE, United Kingdom
Seller rating 4 out of 5 stars
Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Seller Inventory # ERICA75838433873546
Buy Used
£ 133
£ 25 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available