The unsteady flow in aircraft and industrial combustors limits fuel-lean operation and influences flame-stability characteristics. Flame instabilities in the combustor can lead to significant performance degradation, reduced combustion efficiencies, unburned hydrocarbons (UHC), possible blow out, structural vibration, lift-off and even catastrophic failure. In Trapped Vortex Combustor (TVC), flame is independent of the main flow and therefore potential disturbances in the main air flow do not affect the stability of the flame. Combustion stability in TVC is achieved using recirculation zones so as to provide continuous source of ignition by mixing hot products and burning gases with incoming fuel and air. Swirl vanes, bluff bodies, and rearward facing steps are commonly used methods to establish recirculation zones for flame stabilization.
"synopsis" may belong to another edition of this title.
Sony.C, MTech:Studied Applied Mechanics at IIT Madras, Chennai. Senior CFD Engineer, Chennai. Vengadesan.S, Ph.D:Fluid Mechanics at Kobe University, Japan. Associate Professor,Dept. of Applied Mechanics, IIT Madras
Sony.C, MTech:Studied Applied Mechanics at IIT Madras, Chennai. Senior CFD Engineer, Chennai. Vengadesan.S, Ph.D:Fluid Mechanics at Kobe University, Japan. Associate Professor,Dept. of Applied Mechanics, IIT Madras
"About this title" may belong to another edition of this title.
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The unsteady flow in aircraft and industrial combustors limits fuel-lean operation and influences flame-stability characteristics. Flame instabilities in the combustor can lead to significant performance degradation, reduced combustion efficiencies, unburned hydrocarbons (UHC), possible blow out, structural vibration, lift-off and even catastrophic failure. In Trapped Vortex Combustor (TVC), flame is independent of the main flow and therefore potential disturbances in the main air flow do not affect the stability of the flame. Combustion stability in TVC is achieved using recirculation zones so as to provide continuous source of ignition by mixing hot products and burning gases with incoming fuel and air. Swirl vanes, bluff bodies, and rearward facing steps are commonly used methods to establish recirculation zones for flame stabilization. 68 pp. Englisch. Seller Inventory # 9783843359948
Seller: moluna, Greven, Germany
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Chindada SonySony.C, MTech:Studied Applied Mechanics at IIT Madras, Chennai. Senior CFD Engineer, Chennai. Vengadesan.S, Ph.D:Fluid Mechanics at Kobe University, Japan. Associate Professor,Dept. of Applied Mechanics, IIT Madras. Seller Inventory # 5465965
Quantity: Over 20 available
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The unsteady flow in aircraft and industrial combustors limits fuel-lean operation and influences flame-stability characteristics. Flame instabilities in the combustor can lead to significant performance degradation, reduced combustion efficiencies, unburned hydrocarbons (UHC), possible blow out, structural vibration, lift-off and even catastrophic failure. In Trapped Vortex Combustor (TVC), flame is independent of the main flow and therefore potential disturbances in the main air flow do not affect the stability of the flame. Combustion stability in TVC is achieved using recirculation zones so as to provide continuous source of ignition by mixing hot products and burning gases with incoming fuel and air. Swirl vanes, bluff bodies, and rearward facing steps are commonly used methods to establish recirculation zones for flame stabilization. Seller Inventory # 9783843359948
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The unsteady flow in aircraft and industrial combustors limits fuel-lean operation and influences flame-stability characteristics. Flame instabilities in the combustor can lead to significant performance degradation, reduced combustion efficiencies, unburned hydrocarbons (UHC), possible blow out, structural vibration, lift-off and even catastrophic failure. In Trapped Vortex Combustor (TVC), flame is independent of the main flow and therefore potential disturbances in the main air flow do not affect the stability of the flame. Combustion stability in TVC is achieved using recirculation zones so as to provide continuous source of ignition by mixing hot products and burning gases with incoming fuel and air. Swirl vanes, bluff bodies, and rearward facing steps are commonly used methods to establish recirculation zones for flame stabilization.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 68 pp. Englisch. Seller Inventory # 9783843359948