Synopsis
This book presents the investigation done on the effect of water temperatures on concrete properties. Water is an essential ingredient in concrete. The temperature of water changes according to the weather. This creates special challenges in the concrete production especially at hot climatic. Hence, there are more obstacles to overcome when using hot water to produce concrete. The effect of water temperature during casting and curing of concrete on concrete properties have been studied. Concrete samples were prepared and cured under different water temperature and the properties of concrete tested. The tests include slump, compressive strength, rebound hammer, UPV, and water absorption. From the analysis of test results, it was found that higher water temperature used during concrete mixing reduced the overall strength and other properties of concrete. Addition of hot water while mixing leads to further the defects and failure in the hardened state at 28 days, but high early strength. It is concluded that concrete should be prepared by using the water temperature in the range between 20°C to 35°C under room temperature in order to get optimum performance.
"synopsis" may belong to another edition of this title.
About the Author
Dr.Sivakumar Naganathan is working as Associate Professor in the department of civil engineering, Universiti Tenaga Nasional (UNITEN), Malaysia. Mr.Lu Han Lin is an alumni of UNITEN working in the industry. Prof.Ir. Dr. Kamal Nasharuddin Mustapha is a Professor & Deputy Vice-Chancellor(SAAM), UNITEN, Malaysia.
"About this title" may belong to another edition of this title.
Search results for Effect of casting and curing water temperature on concrete...
Seller Image
Effect of casting and curing water temperature on concrete properties
Published by
LAP LAMBERT Academic Publishing Sep 2014, 2014
ISBN 10: 3659613371
ISBN 13: 9783659613371
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book presents the investigation done on the effect of water temperatures on concrete properties. Water is an essential ingredient in concrete. The temperature of water changes according to the weather. This creates special challenges in the concrete production especially at hot climatic. Hence, there are more obstacles to overcome when using hot water to produce concrete. The effect of water temperature during casting and curing of concrete on concrete properties have been studied. Concrete samples were prepared and cured under different water temperature and the properties of concrete tested. The tests include slump, compressive strength, rebound hammer, UPV, and water absorption. From the analysis of test results, it was found that higher water temperature used during concrete mixing reduced the overall strength and other properties of concrete. Addition of hot water while mixing leads to further the defects and failure in the hardened state at 28 days, but high early strength. It is concluded that concrete should be prepared by using the water temperature in the range between 20°C to 35°C under room temperature in order to get optimum performance. 88 pp. Englisch. Seller Inventory # 9783659613371
Seller Image
Effect of casting and curing water temperature on concrete properties
Published by
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659613371
ISBN 13: 9783659613371
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Naganathan SivakumarDr.Sivakumar Naganathan is working as Associate Professor in the department of civil engineering, Universiti Tenaga Nasional (UNITEN), Malaysia. Mr.Lu Han Lin is an alumni of UNITEN working in the industry. Prof.I. Seller Inventory # 5168378
Buy New
£ 30.44
£ 42.26 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Effect of casting and curing water temperature on concrete properties
Published by
LAP LAMBERT Academic Publishing Sep 2014, 2014
ISBN 10: 3659613371
ISBN 13: 9783659613371
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book presents the investigation done on the effect of water temperatures on concrete properties. Water is an essential ingredient in concrete. The temperature of water changes according to the weather. This creates special challenges in the concrete production especially at hot climatic. Hence, there are more obstacles to overcome when using hot water to produce concrete. The effect of water temperature during casting and curing of concrete on concrete properties have been studied. Concrete samples were prepared and cured under different water temperature and the properties of concrete tested. The tests include slump, compressive strength, rebound hammer, UPV, and water absorption. From the analysis of test results, it was found that higher water temperature used during concrete mixing reduced the overall strength and other properties of concrete. Addition of hot water while mixing leads to further the defects and failure in the hardened state at 28 days, but high early strength. It is concluded that concrete should be prepared by using the water temperature in the range between 20°C to 35°C under room temperature in order to get optimum performance.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 88 pp. Englisch. Seller Inventory # 9783659613371
Seller Image
Effect of casting and curing water temperature on concrete properties
Published by
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659613371
ISBN 13: 9783659613371
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This book presents the investigation done on the effect of water temperatures on concrete properties. Water is an essential ingredient in concrete. The temperature of water changes according to the weather. This creates special challenges in the concrete production especially at hot climatic. Hence, there are more obstacles to overcome when using hot water to produce concrete. The effect of water temperature during casting and curing of concrete on concrete properties have been studied. Concrete samples were prepared and cured under different water temperature and the properties of concrete tested. The tests include slump, compressive strength, rebound hammer, UPV, and water absorption. From the analysis of test results, it was found that higher water temperature used during concrete mixing reduced the overall strength and other properties of concrete. Addition of hot water while mixing leads to further the defects and failure in the hardened state at 28 days, but high early strength. It is concluded that concrete should be prepared by using the water temperature in the range between 20°C to 35°C under room temperature in order to get optimum performance. Seller Inventory # 9783659613371
Seller Image
Effect of casting and curing water temperature on concrete properties
Published by
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659613371
ISBN 13: 9783659613371
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Effect of casting and curing water temperature on concrete properties | Sivakumar Naganathan (u. a.) | Taschenbuch | 88 S. | Englisch | 2014 | LAP LAMBERT Academic Publishing | EAN 9783659613371 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. Seller Inventory # 105052779