Synopsis
With circuit densities continuing to increase at the rate of 30% per year, the problem associated with the thermal control of electronic devices will continue to multiply. Thermal control of electronic components has one principal objective to maintain relatively constant component temperature equal to or below the specified temperature. For the heat fluxes 1.0 to 10.0 W/cm2, forced air convection may be employed. Investigations have demonstrated that a component operating 10○C above the specified temperature can reduce the reliability of some systems by as much as 50%. New techniques that are capable of eliminating hot spots in the printed circuit boards with semiconductor chips must be developed. From reliability point of view, the peak temperatures are limited to lower values than in the past. These concerns have generated motivation for research study of forced convection cooling in electronic equipments with printed circuit boards. The flow in these channels is usually low due to small dimensions and so, a number of innovative techniques are imperative to achieve higher heat transfer.
"synopsis" may belong to another edition of this title.
About the Author
Dr. Bhatt has served some reputed engineering colleges in Bangalore, India, as a faculty over fifteen years. Dr. Bhatt has conducted a few training programs for the engineering faculty. He has published many research papers in reputed journals, and he has been active in the research areas like electronic cooling, heat exchangers, bio-fuels etc..
"About this title" may belong to another edition of this title.
Search results for Heat Transfer Augmentation in a Semiconductor Device
Seller Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
LAP LAMBERT Academic Publishing Okt 2013, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -With circuit densities continuing to increase at the rate of 30% per year, the problem associated with the thermal control of electronic devices will continue to multiply. Thermal control of electronic components has one principal objective to maintain relatively constant component temperature equal to or below the specified temperature. For the heat fluxes 1.0 to 10.0 W/cm2, forced air convection may be employed. Investigations have demonstrated that a component operating 10 C above the specified temperature can reduce the reliability of some systems by as much as 50%. New techniques that are capable of eliminating hot spots in the printed circuit boards with semiconductor chips must be developed. From reliability point of view, the peak temperatures are limited to lower values than in the past. These concerns have generated motivation for research study of forced convection cooling in electronic equipments with printed circuit boards. The flow in these channels is usually low due to small dimensions and so, a number of innovative techniques are imperative to achieve higher heat transfer. 188 pp. Englisch. Seller Inventory # 9783659472800
Seller Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Bhatt G. S.Dr. Bhatt has served some reputed engineering colleges in Bangalore, India, as a faculty over fifteen years. Dr. Bhatt has conducted a few training programs for the engineering faculty. He has published many research paper. Seller Inventory # 5158172
Buy New
£ 50.91
£ 41.66 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Stock Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Softcover
Seller: Books Puddle, New York, NY, U.S.A.
Seller rating 4 out of 5 stars
Condition: New. pp. 188. Seller Inventory # 26128412687
Stock Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Softcover
Seller: Majestic Books, Hounslow, United Kingdom
Seller rating 4 out of 5 stars
Condition: New. Print on Demand pp. 188 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam. Seller Inventory # 131126224
Buy New
£ 99.74
£ 6.50 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 4 available
Stock Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Softcover
Seller: Biblios, Frankfurt am main, HESSE, Germany
Seller rating 4 out of 5 stars
Condition: New. PRINT ON DEMAND pp. 188. Seller Inventory # 18128412677
Seller Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Heat Transfer Augmentation in a Semiconductor Device | G. S. Bhatt | Taschenbuch | 188 S. | Englisch | 2013 | LAP LAMBERT Academic Publishing | EAN 9783659472800 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 105606197
Seller Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
LAP LAMBERT Academic Publishing Okt 2013, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -With circuit densities continuing to increase at the rate of 30% per year, the problem associated with the thermal control of electronic devices will continue to multiply. Thermal control of electronic components has one principal objective to maintain relatively constant component temperature equal to or below the specified temperature. For the heat fluxes 1.0 to 10.0 W/cm2, forced air convection may be employed. Investigations have demonstrated that a component operating 10¿C above the specified temperature can reduce the reliability of some systems by as much as 50%. New techniques that are capable of eliminating hot spots in the printed circuit boards with semiconductor chips must be developed. From reliability point of view, the peak temperatures are limited to lower values than in the past. These concerns have generated motivation for research study of forced convection cooling in electronic equipments with printed circuit boards. The flow in these channels is usually low due to small dimensions and so, a number of innovative techniques are imperative to achieve higher heat transfer.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 188 pp. Englisch. Seller Inventory # 9783659472800
Seller Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - With circuit densities continuing to increase at the rate of 30% per year, the problem associated with the thermal control of electronic devices will continue to multiply. Thermal control of electronic components has one principal objective to maintain relatively constant component temperature equal to or below the specified temperature. For the heat fluxes 1.0 to 10.0 W/cm2, forced air convection may be employed. Investigations have demonstrated that a component operating 10 C above the specified temperature can reduce the reliability of some systems by as much as 50%. New techniques that are capable of eliminating hot spots in the printed circuit boards with semiconductor chips must be developed. From reliability point of view, the peak temperatures are limited to lower values than in the past. These concerns have generated motivation for research study of forced convection cooling in electronic equipments with printed circuit boards. The flow in these channels is usually low due to small dimensions and so, a number of innovative techniques are imperative to achieve higher heat transfer. Seller Inventory # 9783659472800
Stock Image
Heat Transfer Augmentation in a Semiconductor Device
Published by
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659472808
ISBN 13: 9783659472800
Used
Paperback
Seller: Mispah books, Redhill, SURRE, United Kingdom
Seller rating 4 out of 5 stars
Paperback. Condition: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Seller Inventory # ERICA79736594728086
Buy Used
£ 136
£ 25 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available