In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented.
"synopsis" may belong to another edition of this title.
Prof.Dr. Goran Rafajlovski is a full Professor in the Faculty of Electrical Engineering and Information Technologies Skopje and invited guest professor at the SRH University Berlin. He is a Member of IEEE IAS Power Engineering Society and DAAD Alumni. His field of interest includes power quality, renewable, electrical machines drives and control
"About this title" may belong to another edition of this title.
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented. 88 pp. Englisch. Seller Inventory # 9783639862577
Seller: Majestic Books, Hounslow, United Kingdom
Condition: New. Print on Demand. Seller Inventory # 407230605
Quantity: 4 available
Seller: Revaluation Books, Exeter, United Kingdom
Paperback. Condition: Brand New. 88 pages. 8.66x5.91x0.20 inches. In Stock. Seller Inventory # zk3639862570
Quantity: 1 available
Seller: Biblios, Frankfurt am main, HESSE, Germany
Condition: New. PRINT ON DEMAND. Seller Inventory # 18405956440
Seller: moluna, Greven, Germany
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Rafajlovski GoranProf.Dr. Goran Rafajlovski is a full Professor in the Faculty of Electrical Engineering and Information Technologies Skopje and invited guest professor at the SRH University Berlin. He is a Member of IEEE IAS Power E. Seller Inventory # 151404885
Quantity: Over 20 available
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 88 pp. Englisch. Seller Inventory # 9783639862577
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented. Seller Inventory # 9783639862577
Seller: preigu, Osnabrück, Germany
Taschenbuch. Condition: Neu. DC Motors | Dynamics and Control | Goran Rafajlovski (u. a.) | Taschenbuch | 88 S. | Englisch | 2016 | Scholars' Press | EAN 9783639862577 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 103989407