Applied Scanning Probe Methods III: Characterization (NanoScience and Technology) - Hardcover

Hardcover

ISBN 10: 3540269096 ISBN 13: 9783540269090

Publisher: Springer, 2006

Synopsis

The Nobel Prize of 1986 on Sc- ning Tunneling Microscopy sig- led a new era in imaging. The sc- ning probes emerged as a new i- trument for imaging with a pre- sion suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the - gneticForceMicroscope,MFM,and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.

About this title

Review

From the reviews:

"The editors have done a good job in making the various chapters quite readable and most of the chapters are well written on a level that will be accessible to most readers. ... As is usually the case with Springer books, these volumes have been beautifully printed, illustrated, and nicely bound for long term durability." (Gary J. Long & Fernande Grandjean, Physicalia Magazine, Vol. 29 (4), 2007

Synopsis

Volumes II, III and IV examine the physical and technical foundation for recent progress in applied near-field scanning probe techniques, and build upon the first volume published in early 2004. The field is progressing so fast that there is a need for a second set of volumes to capture the latest developments. It constitutes a timely comprehensive overview of SPM applications, now that industrial applications span topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. Volume II introduces scanning probe microscopy, including sensor technology, Volume III covers the whole range of characterization possibilities using SPM and Volume IV offers chapters on uses in various industrial applications. The international perspective offered in these three volumes - which belong together - contributes further to the evolution of SPM techniques.

Edition details

• Publisher: Springer
• Publication date: 2006
• Language: English
• ISBN 10: 3540269096
• ISBN 13: 9783540269090
• Binding: Hardcover
• Number of pages: 422
• Editor: Bhushan Bharat, Fuchs Harald