Items related to Electric Discharge Machining: To Study The Effect of...
Electric Discharge Machining: To Study The Effect of Input Parameters on AISI 1040 Steel In Die- Sinker EDM - Softcover
Synopsis
With the development of technology and industries, newer materials such as Tungsten, Molybdenum etc. and various other Super Alloys and Ceramics have been developed which are being widely used in nuclear engineering, aerospace and various other industries because of their hardness, heat resistance qualities and high strength to weight ratio. Machining of these hard materials is very difficult by conventional machining processes. Therefore non-conventional machining processes have been developed for the machining of such type of materials. The Objective of this work is mainly to study the effect of various input parameters like Electrode material, Discharge Current, Gap Voltage, Pulse-On Time, Pulse-Off Time on the various output parameters like MRR, TWR and Surface roughness. In this study, these output parameters are studied by using the Taguchi’s Design of Experiments through Minitab software. Using this software, Means and S/N ratios for all the output parameters were calculated. Micro structure was also observed using SEM machine.
"synopsis" may belong to another edition of this title.
Search results for Electric Discharge Machining: To Study The Effect of...
Seller Image
Electric Discharge Machining
Published by
LAP LAMBERT Academic Publishing Mrz 2017, 2017
ISBN 10: 3330064242
ISBN 13: 9783330064249
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -With the development of technology and industries, newer materials such as Tungsten, Molybdenum etc. and various other Super Alloys and Ceramics have been developed which are being widely used in nuclear engineering, aerospace and various other industries because of their hardness, heat resistance qualities and high strength to weight ratio. Machining of these hard materials is very difficult by conventional machining processes. Therefore non-conventional machining processes have been developed for the machining of such type of materials. The Objective of this work is mainly to study the effect of various input parameters like Electrode material, Discharge Current, Gap Voltage, Pulse-On Time, Pulse-Off Time on the various output parameters like MRR, TWR and Surface roughness. In this study, these output parameters are studied by using the Taguchi's Design of Experiments through Minitab software. Using this software, Means and S/N ratios for all the output parameters were calculated. Micro structure was also observed using SEM machine. 80 pp. Englisch. Seller Inventory # 9783330064249
Stock Image
Electric Discharge Machining: To Study The Effect of Input Parameters on AISI 1040 Steel In Die- Sinker EDM
Published by
LAP LAMBERT Academic Publishing, 2017
ISBN 10: 3330064242
ISBN 13: 9783330064249
New
Paperback
Seller: Revaluation Books, Exeter, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Brand New. 80 pages. 8.66x5.91x0.19 inches. In Stock. Seller Inventory # 3330064242
Buy New
£ 51.02
£ 10 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Seller Image
Electric Discharge Machining
Published by
LAP LAMBERT Academic Publishing, 2017
ISBN 10: 3330064242
ISBN 13: 9783330064249
New
Softcover
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Singh Kanwal JeetKanwal Jeet Singh Author was born in Bathinda City, India Country, In 5th Jan 1987. He received his B.TEch degree in Mechanical Engg: from Giani Zail Singh College of Engg: & Tech: Bathinda, India, In 2009. M.E degre. Seller Inventory # 151235735
Buy New
£ 27.60
£ 41.98 shipping
Ships from Germany to U.S.A.
Ships from Germany to U.S.A.
Quantity: Over 20 available
Seller Image
Electric Discharge Machining
Published by
LAP LAMBERT Academic Publishing Mär 2017, 2017
ISBN 10: 3330064242
ISBN 13: 9783330064249
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - Print on Demand Titel. Neuware -With the development of technology and industries, newer materials such as Tungsten, Molybdenum etc. and various other Super Alloys and Ceramics have been developed which are being widely used in nuclear engineering, aerospace and various other industries because of their hardness, heat resistance qualities and high strength to weight ratio. Machining of these hard materials is very difficult by conventional machining processes. Therefore non-conventional machining processes have been developed for the machining of such type of materials. The Objective of this work is mainly to study the effect of various input parameters like Electrode material, Discharge Current, Gap Voltage, Pulse-On Time, Pulse-Off Time on the various output parameters like MRR, TWR and Surface roughness. In this study, these output parameters are studied by using the Taguchi's Design of Experiments through Minitab software. Using this software, Means and S/N ratios for all the output parameters were calculated. Micro structure was also observed using SEM machine.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 80 pp. Englisch. Seller Inventory # 9783330064249
Seller Image
Electric Discharge Machining : To Study The Effect of Input Parameters on AISI 1040 Steel In Die- Sinker EDM
Published by
LAP LAMBERT Academic Publishing, 2017
ISBN 10: 3330064242
ISBN 13: 9783330064249
New
Taschenbuch
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - With the development of technology and industries, newer materials such as Tungsten, Molybdenum etc. and various other Super Alloys and Ceramics have been developed which are being widely used in nuclear engineering, aerospace and various other industries because of their hardness, heat resistance qualities and high strength to weight ratio. Machining of these hard materials is very difficult by conventional machining processes. Therefore non-conventional machining processes have been developed for the machining of such type of materials. The Objective of this work is mainly to study the effect of various input parameters like Electrode material, Discharge Current, Gap Voltage, Pulse-On Time, Pulse-Off Time on the various output parameters like MRR, TWR and Surface roughness. In this study, these output parameters are studied by using the Taguchi's Design of Experiments through Minitab software. Using this software, Means and S/N ratios for all the output parameters were calculated. Micro structure was also observed using SEM machine. Seller Inventory # 9783330064249
Seller Image
Electric Discharge Machining | To Study The Effect of Input Parameters on AISI 1040 Steel In Die- Sinker EDM
Published by
LAP LAMBERT Academic Publishing, 2017
ISBN 10: 3330064242
ISBN 13: 9783330064249
New
Taschenbuch
Seller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Electric Discharge Machining | To Study The Effect of Input Parameters on AISI 1040 Steel In Die- Sinker EDM | Kanwal Jeet Singh (u. a.) | Taschenbuch | 80 S. | Englisch | 2017 | LAP LAMBERT Academic Publishing | EAN 9783330064249 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Seller Inventory # 108855530