Items related to Design of Concrete Structures with Stress Fields
Synopsis
17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models.
"synopsis" may belong to another edition of this title.
Product Description
The book presents a unified approach to the design and detailing of reinforced and prestressed concrete structures. Simple and, above all, clear models in the form of stress fields, consistently based on the theory of plasticity are developed to determine the statical action and the strength. These models are then used to design and detail the structural components and connections. Practical experience as well as fifty years of extensive testing have demonstrated that the theory of plasticity provides a rational, logical, consistent and simple method for investigating the statical behaviour and strength of reinforced and prestressed concrete structures. Throughout the text references are made to the pertinent literature. Also available in German
"About this title" may belong to another edition of this title.
Buy Used
View this item
£ 51.79
£ 16.47 shipping from Italy to United Kingdom
Destination, rates & speedsOther Popular Editions of the Same Title
Search results for Design of Concrete Structures with Stress Fields
Stock Image
Design of Concrete Structures with Stress Fields
Seller: Chiron Media, Wallingford, United Kingdom
Seller rating 4 out of 5 stars
PF. Condition: New. Seller Inventory # 6666-IUK-9783034898850
Quantity: 10 available
Seller Image
Design of Concrete Structures with Stress Fields
Seller: Libreria sottomarina - Studio Bibliografico, ROMA, RM, Italy
Seller rating 5 out of 5 stars
brossura. Condition: Perfetto (Mint). Book. Seller Inventory # oc01uTEK
Quantity: 1 available
Stock Image
Design of Concrete Structures with Stress Fields
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. In. Seller Inventory # ria9783034898850_new
Quantity: Over 20 available
Seller Image
Design of Concrete Structures with Stress Fields
Published by
Birkhäuser Basel Sep 2011, 2011
ISBN 10: 3034898851
ISBN 13: 9783034898850
New
Taschenbuch
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models. 160 pp. Englisch. Seller Inventory # 9783034898850
Quantity: 2 available
Seller Image
Design of Concrete Structures with Stress Fields
Seller: moluna, Greven, Germany
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 4319688
Quantity: Over 20 available
Seller Image
Design of Concrete Structures with Stress Fields
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - 17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models. Seller Inventory # 9783034898850
Quantity: 1 available
Stock Image
Design of Concrete Structures with Stress Fields
Seller: California Books, Miami, FL, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # I-9783034898850
Quantity: Over 20 available
Seller Image
Design of Concrete Structures with Stress Fields
Published by
Birkhäuser Basel, Birkhäuser Basel Sep 2011, 2011
ISBN 10: 3034898851
ISBN 13: 9783034898850
New
Taschenbuch
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Taschenbuch. Condition: Neu. Neuware -17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models.Springer Basel AG in Springer Science + Business Media, Heidelberger Platz 3, 14197 Berlin 160 pp. Englisch. Seller Inventory # 9783034898850
Quantity: 2 available
Stock Image
Design of Concrete Structures with Stress Fields
Seller: Books Puddle, New York, NY, U.S.A.
Seller rating 4 out of 5 stars
Condition: New. Seller Inventory # 2654508385
Quantity: 4 available
Stock Image
Design of Concrete Structures with Stress Fields
Print on DemandSeller: Majestic Books, Hounslow, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. Print on Demand. Seller Inventory # 55051454
Quantity: 4 available