Comparative Materials Selection Data (v. 2) (The Plastics Compendium) - Hardcover

Hough, M.C.; Allan, S.J.; Dolbey, R.; Allen, S.J.

Hardcover

ISBN 10: 1859570925 ISBN 13: 9781859570920

Publisher: Rapra Technology Ltd, 1997

Synopsis

A comprehensive collection of professionally validated, comparative data, on the most widely used plastics materials. The Plastics Compendium covers thermoplastics, thermosets, composites and thermoplastic elastomers.

The properties and processability of plastics materials are subject to a number of influences. Factors such as chemical constitution, molecular weight and degree of crystallinity are clearly of primary importance, but they do not tell the whole story. Commercial grades of plastics contain reinforcing agents and fillers, plasticisers and lubricants, which may enhance one aspect of a material's performance whilst diminishing another. Accurate data on the performance of the most widely available modified grades are therefore essential when specifying materials for ever more demanding applications. The relative costs of materials may also be significant when large production runs are planned or if a number of materials meet the required performance criteria. All these aspects are addressed in The Plastics Compendium; a unique resource from Rapra Technology Limited.

Volume 1 of The Plastics Compendium contains clearly presented data on 351 generic and modified material types, in the following main sections:

* Property and commercial data sheets
* An alphabetical trade name index
* A listing of suppliers’ (or their agents’) addresses, together with telephone, telex and fax numbers, in up to 15 European countries and the USA
* A detailed alphabetical index to the materials for which data are listed.

The property and commercial data sheets provide three types of information:

* Textual information presented in the form of Advantages, Disadvantages and Typical Applications
* Materials data; listing values of 24 key properties (where applicable) for all 351 materials (including mechanical and electrical properties, flammability, recommended material drying time and moulding temperature, mould shrinkage, maximum operating temperature, water absorption and cost)
* Source data; listing suppliers and their trade names.

About this title

Synopsis

Handbook of performance and processability data for plastics materials.

Edition details

• Publisher: Rapra Technology Ltd
• Publication date: 1997
• Language: English
• ISBN 10: 1859570925
• ISBN 13: 9781859570920
• Binding: Hardcover
• Number of pages: 500