Synopsis
This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club. The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling. Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment.
"synopsis" may belong to another edition of this title.
About the Author
David Fenner is the recently-retired editor of Model Engineers’ Workshop magazine who has based this practical book on his many hours “road testing” mini-lathes in his own home workshop.
From the Back Cover
This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club.
The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment.
"About this title" may belong to another edition of this title.
Search results for Mini-lathe Tools and Projects: 48 (Workshop Practice...
Stock Image
Mini-lathe Tools and Projects: 48 (Workshop Practice Series)
Published by
Special Interest Model Books, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
Used
Paperback
Seller: WorldofBooks, Goring-By-Sea, WS, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged. Seller Inventory # GOR007171286
Buy Used
£ 3.40
£ 5.60 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Stock Image
Mini-Lathe Tools & Projects
Published by
Special Interest Model Books, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
Used
paperback
Seller: Bookmans, Tucson, AZ, U.S.A.
Seller rating 5 out of 5 stars
paperback. Condition: Good. . Satisfaction 100% guaranteed. Seller Inventory # mon0002662965
Seller Image
Mini-lathe Tools and Projects
Published by
Special Interest Model Books, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
New
Softcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # 12751577-n
Seller Image
Mini-Lathe Tools and Projects
Published by
Fox Chapel Publishers International, GB, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
New
Paperback
Seller: Rarewaves.com USA, London, LONDO, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: New. This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club. The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling. Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment. Seller Inventory # LU-9781854862655
Buy New
£ 13.02
Free Shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: Over 20 available
Seller Image
Mini-lathe Tools and Projects
Published by
Special Interest Model Books, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
Used
Softcover
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: As New. Unread book in perfect condition. Seller Inventory # 12751577
Stock Image
Mini-Lathe Tools and Projects
Published by
Fox Chapel Publishers International, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
New
PAP
Seller: PBShop.store US, Wood Dale, IL, U.S.A.
Seller rating 5 out of 5 stars
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000. Seller Inventory # GB-9781854862655
Seller Image
Mini-Lathe Tools and Projects
Published by
Fox Chapel Publishers International, GB, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
New
Paperback
Seller: Rarewaves USA, OSWEGO, IL, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: New. This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club. The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling. Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment. Seller Inventory # LU-9781854862655
Seller Image
Mini-Lathe Tools and Projects (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
New
Paperback
Seller: Grand Eagle Retail, Bensenville, IL, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club. The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling. Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment. This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine and specific tools such as the radius turning attachment, the tailstock and the dividing head. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Seller Inventory # 9781854862655
Stock Image
Mini-lathe Tools and Projects (Workshop Practice Series)
Published by
Special Interest Model Books, 2011
ISBN 10: 1854862650
ISBN 13: 9781854862655
Used
Paperback
Seller: Reuseabook, Gloucester, GLOS, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Used; Good. Dispatched, from the UK, within 48 hours of ordering. This book is in good condition but will show signs of previous ownership. Please expect some creasing to the spine and/or minor damage to the cover. Seller Inventory # CHL10865494
Buy Used
£ 5.72
£ 10 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Stock Image
Mini-Lathe Tools and Projects
Published by
Fox Chapel Publishers International, 2012
ISBN 10: 1854862650
ISBN 13: 9781854862655
New
PAP
Seller: PBShop.store UK, Fairford, GLOS, United Kingdom
Seller rating 5 out of 5 stars
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000. Seller Inventory # GB-9781854862655
Buy New
£ 12.13
£ 4.16 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 3 available