Synopsis
The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: • Poor predictability and reliability at high temperature. • High costs relative to competing materials. • Variable reproducibility of manufacturing processes. • Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics.
"synopsis" may belong to another edition of this title.
Other Popular Editions of the Same Title
Search results for Designing with Structural Ceramics
Stock Image
Designing with Structural Ceramics
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Seller rating 5 out of 5 stars
Condition: New. Seller Inventory # ABLIING23Mar2912160256087
Stock Image
Designing with Structural Ceramics
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Seller rating 5 out of 5 stars
Condition: New. In. Seller Inventory # ria9781851667406_new
Buy New
£ 50.82
Shipping:
£ 11.98
From United Kingdom to U.S.A.
Quantity: Over 20 available
Seller Image
Designing with Structural Ceramics
Published by
Springer Netherlands Dez 1991, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
New
Hardcover
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: - Poor predictability and reliability at high temperature. - High costs relative to competing materials. - Variable reproducibility of manufacturing processes. - Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics. 356 pp. Englisch. Seller Inventory # 9781851667406
Stock Image
Designing with Structural Ceramics
Published by
Kluwer Academic Publishers Group, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
New
Hardcover
Seller: THE SAINT BOOKSTORE, Southport, United Kingdom
Seller rating 5 out of 5 stars
Hardback. Condition: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days 760. Seller Inventory # C9781851667406
Buy New
£ 57.78
Shipping:
£ 18.35
From United Kingdom to U.S.A.
Quantity: Over 20 available
Stock Image
Designing With Structural Ceramics
Seller: Revaluation Books, Exeter, United Kingdom
Seller rating 5 out of 5 stars
Hardcover. Condition: Brand New. 351 pages. 9.88x6.97x1.14 inches. In Stock. Seller Inventory # x-1851667407
Seller Image
Designing with Structural Ceramics
Print on DemandSeller: moluna, Greven, Germany
Seller rating 4 out of 5 stars
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride in the 70s, improved aluminas, sint. Seller Inventory # 448377348
Stock Image
Designing with Structural Ceramics (Commission of the European Communities)
Published by
Elsevier Science Publishers Ltd., Barking, Essex, England, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
Used
Hardcover
First Edition
Seller: PsychoBabel & Skoob Books, Didcot, United Kingdom
Seller rating 5 out of 5 stars
hardcover. Condition: Very Good. Dust Jacket Condition: No Dust Jacket. First Edition, First Printing. numerous figures and tables, bump to tail of spine, small scrape to bottom of back cover, text and illustrations are clean, bright and tight throughout. Ex-Library. Seller Inventory # 102448
Seller Image
Designing with Structural Ceramics
Published by
Springer Netherlands, Springer Netherlands Dez 1991, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
New
Hardcover
Seller: buchversandmimpf2000, Emtmannsberg, BAYE, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. Neuware -The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: ¿ Poor predictability and reliability at high temperature. ¿ High costs relative to competing materials. ¿ Variable reproducibility of manufacturing processes. ¿ Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics. 356 pp. Englisch. Seller Inventory # 9781851667406
Seller Image
Designing with Structural Ceramics
Print on DemandSeller: preigu, Osnabrück, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. Designing with Structural Ceramics | M. H. van de Voorde (u. a.) | Buch | Einband - fest (Hardcover) | Englisch | 1991 | Springer Netherland | EAN 9781851667406 | Verantwortliche Person für die EU: Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, productsafety[at]springernature[dot]com | Anbieter: preigu Print on Demand. Seller Inventory # 107091954
Seller Image
Designing with Structural Ceramics
Published by
Springer Netherlands, Springer Netherlands, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
New
Hardcover
Seller: AHA-BUCH GmbH, Einbeck, Germany
Seller rating 5 out of 5 stars
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: - Poor predictability and reliability at high temperature. - High costs relative to competing materials. - Variable reproducibility of manufacturing processes. - Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics. Seller Inventory # 9781851667406