Economic Utilisation of Food Co-Products: Rsc: Volume 24 (Green Chemistry Series) - Hardcover

Hardcover

ISBN 10: 1849736154 ISBN 13: 9781849736152

Publisher: Royal Society of Chemistry, 2013

Synopsis

No longer considered simply as "waste", many food co-products are being identified as economically-viable raw materials and their potential is enhanced by modern processing technologies and the biorefinery concept.

About this title

About the Authors

Project Manager of Sustoil, a project led by the Green Chemistry Centre of Excellence based at the University of York, UK, from 2008-2010.

CSIC, Spain

Excerpt. © Reprinted by permission. All rights reserved.

The Economic Utilisation of Food Co-Products

By Abbas Kazmi, Peter Shuttleworth

The Royal Society of Chemistry

Copyright © 2013 The Royal Society of Chemistry
All rights reserved.

ISBN: 978-1-84973-615-2

Contents

Chapter 1 Green Chemistry and the Biorefinery Abbas Kazmi, 1, 
Chapter 2 Food Waste in the European Union Lucy Nattrass, 25, 
Chapter 3 The Thermochemical Conversion of Biomass into High-Value Products: Microwave Pyrolysis Peter Shuttleworth, Vitaly Budarin and Mark Gronnow, 38, 
Chapter 4 Food Wastes Conversion to Products for Use in Chemical and Environmental Technology, Material Science and Agriculture Enzo Montoneri, Alessandra Bianco Prevot, Paola Avetta, Antonio Arques, Luciano Carlos, Giuliana Magnacca, Enzo Laurenti and Silvia Tabasso, 64, 
Chapter 5 Uses of Waste Starch Peter S. Shuttleworth and Nontipa Supanchaiyamat, 110, 
Chapter 6 Food Waste and Catering Waste; Focus on Valorisation of Used Cooking Oil and Recovered Triglycerides Lorenzo Herrero Dávila, 130, 
Chapter 7 Industrial Use of Oil Cakes for Material Applications Antoine Rouilly and Carlos Vaca-Garcia, 185, 
Subject Index, 214, 

CHAPTER 1

Green Chemistry and the Biorefinery

ABBAS KAZMI

University of York, York, UK

Email: sk_abbaskazmi@yahoo.com

1.1 Introduction to the Biorefinery Concept

The core component of all biorefinery definitions is the conversion of biomass into several products (materials, chemicals, energy, food and feed) and the integration of various technologies and processes in the most sustainable way. The definition developed by the International Energy Agency (IEA) Bioenergy Task 42 Biorefineries has been widely accepted due to its general and broad character:

"Biorefming is the sustainable processing of biomass into a spectrum of marketable products and energy"

This definition includes the following key words:

• biorefinery: concepts, facilities, processes, cluster of industries;

• sustainable: maximising economics, minimising environmental aspects, fossil-fuel replacement, socioeconomic aspects taken into account;

• processing: upstream processing, transformation, fractionation, thermo-chemical and/or biochemical conversion, extraction, separation, down stream processing;

• biomass: crops, organic residues, agroresidues, forest residues, wood, aquatic biomass;

• spectrum: more than one;

• marketable: a market (acceptable volumes and prices) already exists or is expected to be developed in the near future;

• products: both intermediates and final products, i.e. food, feed, materials, and chemicals;

• energy: fuels, power, heat.

Using biomass as a sustainable renewable resource is the only way to replace carbon from fossil sources for the production of the carbon-based products such as chemicals, materials and liquid fuels.

In order to be competitive with crude-oil-based products, an integrated biorefinery strategy has been developed to optimise the added value from biomass. This strategy is mainly based on the transfer of petroleum refineries logic to biomass (raw material fractionation, integration of mass and energy fluxes; integration of processes) in order to be able to produce a spectrum of products and therefore maximising the added value. The approach requires the valorisation of the whole biomass. In other words, a biorefinery concept is based on a zero-waste concept.

Moreover, the biorefinery concept goes beyond the petroleum refineries logic, as it includes the management of sustainability based on a cycle concept. This is obvious for renewable carbon at global scale. The cycle also concerns water and mineral nutrients at the local scale, especially nitrogen, phosphorus and potassium (NPK). Contrary to carbon, these elements have to be left on or reincorporated into the soil to avoid depletion, and thus the use of fossil-based fertilisers to compensate for that soil depletion. More generally, the biorefinery concept includes the management of all sustainability issues, including environmental, economic and societal factors.

According to the project Biorefinery Euroview, "Biorefineries could be described as integrated biobased industries using a variety of technologies to make products such as chemicals, biofuels, food and feed ingredients, biomaterials, fibres and heat and power, aiming at maximising the added value along the three pillars of sustainability (Environment, Economy and Society)".

All biorefineries are biomass-based industries, whereas not all biomass processing plants are biorefineries. It is important to clarify the respective differences in the next section, in order to understand the focus of this biorefinery vision document.

In conventional biomass processing plants, biomass is directly transformed (1st conversion) into a single main product (usually already marketable). In a biorefinery, however, raw products are firstly converted into intermediate products (1st conversion), which are partly or entirely preproducts. These are further processed (2nd conversion) to several end-products or semifinished goods by additional conversion and conditioning steps, predominantly at the same location.

The additional conversion and conditioning steps are carried out to achieve a better valorisation of biomass by transforming the raw product(s) as completely as possible into various value-added end-products.

For a better differentiation of biorefineries, the following listing provides examples of biomass processing plants that are not considered to be biorefineries;

• Plants for biomass conversion that convert the feedstock into one quantitatively dominating, marketable product directly after the primary refining step. Examples are biodiesel plants (main product: biodiesel) or agricultural biogas plants (main product: bioenergy, namely power and heat).

• Plants for biomass conversion that have no combined primary and secondary refining step at the same location. Examples are paper mills without connected pulp mills, separate fermentation plants or starch mills without connected conditioning processes.

• Plants for biomass conversion, where the biomass compounds are not separated, but unmodified or only slightly modified biomass is used or processed. Examples are wood-processing saw mills, or plants producing natural fibre insulation.

A 2030 vision for biorefineries was developed during the FP7 Star-Colibri project that involved European Technology Platforms, Industry Leaders and world-leading academic centres such as the Green Chemistry Centre of Excellence (University of York). Although the work was done in great detail, summaries can be found of this and the 2020 research road map on the project website (www.star-colibri.eu/).

1.1.1 Integration with Existing Industrial Value Chains or Development of New Value Chains

In 2030 many biorefineries will operate at a large-scale commercial level. Most of these biorefineries will be developed based on the integration with existing industrial value chains (top-down approach).

Different biorefineries will be developed based on industrial specificities (sector types) or on geographical specificities (biomass type, quality and availability, infrastructure, presence of a certain industry, etc.). The choice of the technological options (processes, feedstocks, location and scale) within the biorefinery will be made by the industrial actors, based on their competitive advantages (available industrial equipment, technological and industrial know-how, access to biomass). Biorefinery development will be driven by the industrial leaders from sectors such as agroindustry, forest-based industry, energy sector (power and heat), (bio) fuels industry and chemicals.

However, another interesting development path for biorefineries is envisaged on the development of new industrial value chains (bottom-up approach). This refers to newly developed, highly integrated, zero waste sites to produce a broad variety of products for different markets from different, pretreated and preseparated (lignocellulosic) biomass fractions. Usually, the whole biomass crop is used (e.g. woody lignocellulose, grains and straw from cereals, green grass). In 2011 this approach is often still only operating at pilot or demonstration stage (e.g. a lignocellulosic biorefinery in Leuna, Germany). However, a lot of research and development will lead to implementation on a commercial scale in 2030. Preferably these biorefinery plants for new industrial value chains should be integrated in an already existing industrial park to profit from the infrastructure.

In any case, the sustainability and the competitiveness of the different value chains will always rely on a close collaboration within industry sectors and also on a high level of integration between the different production processes.

1.1.2 Biorefinery Scale

The choice of the optimal biorefinery scale has to accommodate the constraints that arise from logistics, production costs and processes. The chosen scale will have a major impact on the emergence of industrial biorefineries and their distribution;

• Large-scale integrated biorefineries, mainly based on thermochemical process, are likely to emerge in Northern Europe and/or in industrial harbours.

• Small/medium-scale integrated biorefineries, mainly based on biotech processes, are likely to emerge in rural areas in "mid" Europe (western, central and eastern Europe).

• Decentralised biorefineries will also emerge in both regions, based on the development of a network of pretreatment units.

As a consequence, the scale has a major impact on the technology choice and on the industrial strategies as it could limit the size of the production facilities (limited biomass quantity per industrial unit). Basically, three possibilities are offered:

• small/medium-sized production facility;

• medium-sized/large production facility linked to a network of decentralised biorefineries (biomass fractioning and/or concentrating units);

• very large production facility, located on industrial harbours with importation of biomass.

1.1.3 Biomass Supply: Harbour (Import of Biomass or Intermediates) or Rural (Locally Produced Biomass)

As a consequence of the biomass supply form, there will be not one but several biorefinery types in Europe, with a predominance of certain types according to the geographical biomass location.

• The biorefineries based on wood (locally produced biomass) are likely to be developed in Northern Europe or in dense forested area in "mid-Europe".

• The biorefineries based on classical agricultural crops (cereal, sugarbeets, oilseed crops) are likely to be developed in "mid-Europe".

• Biorefineries based on imported biomass will be established mainly in or very near to large harbours (like Rotterdam).

• The development of biorefineries in South Europe is more difficult to predict. It could be either connected to the area of industrial harbours or to (new) regional crops.

The BIOPOL (2009) project gave some predictions about the most likely regions for biorefinery development in connection to the biomass availability. The main conclusions were: "Western Europe has the best prospects for biorefinery development. It has: high agricultural yields, vast amounts of lignocellulosic agricultural side streams, considerable forestry and good possibilities to sell biorefinery side products. The countries in the East of Europe have good opportunities to improve agricultural yields. Thus, they could become interesting countries for biorefinery establishment. Northern Europe is currently a natural market leader of lignocellulosic biorefinery due to the presence of large forests."

1.1,4 Biorefinery Concepts in 2030

Some more traditional biorefinery concepts were already established on an industrial scale in 2011. They are based on an extension and/or on upgrading processes of existing industrial plants in the respective sectors. However, there will emerge other, newly developed biorefinery concepts that will be well established in 2030. In 2011, these biorefinery concepts were still only in the research, development or demonstration stage. For some of the following future biorefinery concepts the first pilot plants are being built in Europe in 2011.

1.1.4.1 Starch and Sugar Biorefineries

Starch and sugar agroindustries have a long experience in starch fractioning and/or fermentation and distillation. They are therefore a perfect candidate to integrate biotech processes for first- and second-generation bioethanol and, in a second step, other fermentation products. Starting from production based on starch and sugar crops, the industrial units will progressively use lignocellulosic feedstocks and integrate fractionation processes. The first steps will be the integration into the supply chain of cereal straw and, in a second step, of dedicated lignocellulosic (mainly herbaceous) crops.

The integration scenario does not concern only biomass diversification but also the valorisation of side products of the lignocellulose deconstruction: lignin, C5-sugars from hemicellulose and C6-sugars mainly from cellulose. The utilisation of lignin as an energy source by cogeneration will be progressively replaced by the development of new chemistry based on lignin. The ethanol production from C5-sugars, on account of the poor conversion yield, will be replaced by the development of a new C5-chemistry (by biotech and/or chemical processes) to produce higher-value chemicals (2020–2025 horizon). The ethanol production from C6-sugars will be progressively replaced by new fermentation processes and the production of higher-value chemicals. This development is likely to occur several years after the C5 switch (2025–2030) as the bioethanol European market will still be growing until this period.

The required biomass quantities per biorefinery are in the range of 200 to 400 kt/year of dry biomass, which enables reliance on a local production area, and the integration of the management of sustainability parameters in the production chain (carbon sequestration, nitrogen and other mineral nutrients cycles).

This will lead to the development of small/medium-scale rural biorefineries close to the agricultural production areas producing the required biomass. These rural 'starch and sugar' biorefineries will be implanted in the most efficient production and supply areas. Ideal localisation will be "mid-Europe" (from West to East Europe).

1.1.4.2 Oilseed Biorefineries

The oilseed agroindustry will develop different strategies. Today, it focuses on first-generation biodiesel and the development of the oilseed-based biorefineries could involve the integration of the glycerol valorisation and the development of a glycerol-based chemistry. However, the main evolution of these biorefineries will be based on the development of a new oleochemistry, based on long-chain fatty acids from European oilseeds (mainly rapeseed and sunflower) and the progressive integration of oleochemical processes into the biodiesel production chain. Moreover, this shift will be supported by the evolution of biofuels production in Europe and the relative decrease of first-generation biodiesel on account of its low energy efficiency per surface unit.

1.1.4.3 Forest-Based (Pulp and Paper) Biorefineries

The forest-based (pulp and paper) industry is located close to the main forest areas in Europe (mainly in Northern Europe). The industry has a long experience of woody and lignocellulosic biomass logistic. Wood and pulp byproducts (such as bark) are relatively dry biomass and are therefore well suited for new thermochemical conversion processes such as gasification. The industry is therefore a good candidate to integrate advanced second generation biofuels production and/or chemicals production from syngas {e.g. DME). The industry has also access to a huge amount of lignin, which is currently mainly used for combustion to produce bioenergy. Higher added-value chemicals will be obtained by integrating a chemical valorisation within forest-based biorefineries, particularly focusing on black liquor.

1.1.4.4 Biofuel-Driven Biorefineries

In 2011, there is no industry in Europe yet that has biorefineries using gasification in combination with the Fischer–Tropsch process to produce liquid second-generation biofuels. Since huge investments are needed to set up a large-scale industrial unit, the best candidates will be either energy companies or traditional oil companies, because of the infrastructure availability and the economy of scale. In 2030 oil companies will have installed large-scale biorefineries based on thermochemical process into their existing oil refineries located in the main European harbours. The required biomass (wood, forest residues, dedicated lignocellulosic crops or urban wastes) will be imported and also collected locally. Another interest of the traditional oil companies will be the utilisation of hydrogen from syngas as a source for hydrogenation of heavy crude oil. The gasification units will also be used to produce higher-value chemicals by catalysis processes.

1.1.4.5 Green Biorefinery

A Green Biorefinery processes wet biomass, such as grass, clover, lucerne and alfalfa (BIOPOL, 2009). The wet biomass is pressed to obtain two separate products: fibre-rich press juice and nutrient-rich press cake. The press cake fibres can be utilised as green feed pellets or as a raw material for chemicals. The press juice contains valuable compounds, such as proteins, free amino acids, organic acids, minerals, hormones and enzymes. Lactic acid and its derivatives as well as ethanol, proteins and amino acids are the most favourable end-products from press juice. The bio-organic residues in press juice are mainly used to produce biogas with subsequent generation of heat and electricity.

An example in 2011 of a pilot of this future biorefinery concept is the production and demonstration plant of the Biowert GmbH in Brensbach, Germany, where insulating material, reinforced composites for production of plastics and biogas for heat and power are generated from grass in an integrative process. In 2030 many of these smaller-scale Green Biorefineries will be established in regions that traditionally produce high quantities of wet biomass (like grassland areas).

1.1.4.6 Future Lignocellulosic Biorefineries

The lignocellulosic biorefinery concept based on dry biomass is not only applicable for previously described pulping process. Two different approaches can be distinguished in 2030 for the lignocellulosic biorefinery: thermochemical and biochemical.

The thermochemical approach is based on gasification of lignocellulosic feedstocks, and further processing the syngas to transportation fuels and chemicals. Many different biomass types are taken into consideration as raw material for this type of lignocellulosic biorefinery concept: dry agricultural residues (e.g. straw, peelings, husks), wood, woody biomass, and biogenic residues (e.g. waste paper, lignin).

(Continues...)

Excerpted from The Economic Utilisation of Food Co-Products by Abbas Kazmi, Peter Shuttleworth. Copyright © 2013 The Royal Society of Chemistry. Excerpted by permission of The Royal Society of Chemistry.
All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.

Edition details

• Publisher: Royal Society of Chemistry
• Publication date: 2013
• Language: English
• ISBN 10: 1849736154
• ISBN 13: 9781849736152
• Binding: Hardcover
• Number of pages: 246
• Editor: Abbas Kazmi