Interconnecting Cisco Network Devices (Cisco Career Certification)

McQuerry, Stephen

ISBN 10: 1578701112 ISBN 13: 9781578701117

Publisher: Cisco Press, 2000

Synopsis

Cisco authorized self-study book for CCNA foundation learning

• Prepare for CCNA exam #640-607 certification while learning the fundamentals of setting up, configuring, maintaining, and troubleshooting Cisco networks
• Determine in which situations a hub, Ethernet switch, or router would be more appropriately used Use Cisco software to identify addresses, protocols, and connectivity status in a network containing multiple interconnected Cisco devices
• Interconnect Cisco switches and routers according to a given network design specification
• Configure Cisco switches and routers to support a specified list of protocols and technologies
• Configure access lists to control access to network devices or segments and general network traffic
• Verify that Cisco switches and routers, as well as their configured network services and protocols, operate as intended within a given network specification

Interconnecting Cisco Network Devices is a Cisco authorized self-paced learning tool for CCNA foundation learning. This book provides you with the knowledge needed to identify and recommend the best Cisco solutions for small- to medium-sized businesses. This book teaches you how to perform all the basic configuration procedures to build a multirouter, multigroup internetwork that uses LAN and WAN interfaces for the most commonly used routing and routed protocols.

This book provides the installation, configuration, and troubleshooting information required to install and configure Cisco products. You will learn the fundamentals of interconnecting Cisco network devices in five modules: getting started with Cisco networks (assembling, cabling, operating, configuring, and managing devices), interconnecting Catalyst(r) switches (fundamental switch operations and VLAN configuration), interconnecting Cisco routers (TCP/IP, IP routing, traffic management, and IPX configuration), extending the network to WANs (serial point-to-point connections, ISDN BRI, and Frame Relay PVC connections), and supplemental appendixes (AppleTalk(r), HyperTerminal, Cisco 700 series routers, and password recovery techniques). Each chapter concludes with questions to help assess your understanding of key concepts and start you down the path for attaining your CCNA certification.

Interconnecting Cisco Network Devices is part of a recommended learning path from Cisco Systems that can include simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. In order to find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining.

About this title

About the Author

Cisco Systems, Inc., is the worldwide leader in networking for the Internet. Cisco hardware, software, and service offerings are used to create Internet solutions so that individuals, companies, and countries have easy access to information-regardless of differences in time and place.

Steve McQuerry, CCIE(r) No. 6108, is a certified Cisco Systems instructor who works as a contract instructor and consultant throughout the U.S. teaching networking professionals how to configure and integrate Cisco equipment into their networks. Steve also holds CCNP(r), CCNA, MCSE, MCT, and CNE certifications. He has worked in the networking industry for 10 years and has experience with multiple protocols in small and large networks, including TCP/IP and IPX. Steve currently teaches the Cisco courses ICND, CIT, and BCMSN with Global Knowledge.

From the Back Cover

Cisco authorized self-study book for CCNA foundation learning

• Prepare for CCNA exam #640-607 certification while learning the fundamentals of setting up, configuring, maintaining, and troubleshooting Cisco networks
• Determine in which situations a hub, Ethernet switch, or router would be more appropriately used Use Cisco software to identify addresses, protocols, and connectivity status in a network containing multiple interconnected Cisco devices
• Interconnect Cisco switches and routers according to a given network design specification
• Configure Cisco switches and routers to support a specified list of protocols and technologies
• Configure access lists to control access to network devices or segments and general network traffic
• Verify that Cisco switches and routers, as well as their configured network services and protocols, operate as intended within a given network specification

Interconnecting Cisco Network Devices is a Cisco authorized self-paced learning tool for CCNA foundation learning. This book provides you with the knowledge needed to identify and recommend the best Cisco solutions for small- to medium-sized businesses. This book teaches you how to perform all the basic configuration procedures to build a multirouter, multigroup internetwork that uses LAN and WAN interfaces for the most commonly used routing and routed protocols.

This book provides the installation, configuration, and troubleshooting information required to install and configure Cisco products. You will learn the fundamentals of interconnecting Cisco network devices in five modules: getting started with Cisco networks (assembling, cabling, operating, configuring, and managing devices), interconnecting Catalyst(r) switches (fundamental switch operations and VLAN configuration), interconnecting Cisco routers (TCP/IP, IP routing, traffic management, and IPX configuration), extending the network to WANs (serial point-to-point connections, ISDN BRI, and Frame Relay PVC connections), and supplemental appendixes (AppleTalk(r), HyperTerminal, Cisco 700 series routers, and password recovery techniques). Each chapter concludes with questions to help assess your understanding of key concepts and start you down the path for attaining your CCNA certification.

Interconnecting Cisco Network Devices is part of a recommended learning path from Cisco Systems that can include simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. In order to find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining.

Cisco Systems, Inc., is the worldwide leader in networking for the Internet. Cisco hardware, software, and service offerings are used to create Internet solutions so that individuals, companies, and countries have easy access to information-regardless of differences in time and place.

Steve McQuerry, CCIE(r) No. 6108, is a certified Cisco Systems instructor who works as a contract instructor and consultant throughout the U.S. teaching networking professionals how to configure and integrate Cisco equipment into their networks. Steve also holds CCNP(r), CCNA, MCSE, MCT, and CNE certifications. He has worked in the networking industry for 10 years and has experience with multiple protocols in small and large networks, including TCP/IP and IPX. Steve currently teaches the Cisco courses ICND, CIT, and BCMSN with Global Knowledge.

Edition details

• Publisher: Cisco Press
• Publication date: 2000
• Language: English
• ISBN 10: 1578701112
• ISBN 13: 9781578701117
• Binding: Textbook Binding
• Edition number: 1
• Number of pages: 600