Items related to Extruder Processing: Comparison of Single- and Twin-Screw...

Extruder Processing: Comparison of Single- and Twin-Screw Extruders for Optimal Solids Conveying, Melting, and Mixing - Hardcover

Andersen, Paul G.; Campbell, Gregory A.

 
9781569908631: Extruder Processing: Comparison of Single- and Twin-Screw Extruders for Optimal Solids Conveying, Melting, and Mixing
Hardcover
ISBN 10: 156990863X ISBN 13: 9781569908631
Publisher: Hanser Publications, 2022

Synopsis

Single-screw or twin-screw extruder? When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.

However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.

The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods.

"synopsis" may belong to another edition of this title.

About the Author

Paul G. Andersen, Ph.D., is Process Technology Consultant at Coperion Corporation, Ramsey, NJ, USA. He was previously Director, Process Technology at Coperion, a position he held until 2016. In 2009/2010, he was President of the Society of Plastics Engineers (SPE).

Professor Gregory A. Campbell is Professor Emeritus at Clarkson University, Potsdam, NY, USA. He formerly directed a research group at GM Research and managed polymer fabrication at Mobil Chemical Research.

"About this title" may belong to another edition of this title.

Publisher
Hanser Publications
Publication date
2022
Language
English
ISBN 10 
156990863X
ISBN 13 
9781569908631
Binding
Hardcover
Number of pages
220