Synopsis
Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop.
"synopsis" may belong to another edition of this title.
About the Author
Ian Bradley, who died in 1995, had a lifetime’s experience in precision engineering and contributed articles to Model Engineer magazine for over 50 years. During that period, thousands of engineers had come to regard this book as the first point of reference to turn to when a new aspect of the hobby presented itself.
"About this title" may belong to another edition of this title.
Search results for Metalwork and Machining Hints and Tips: 20 (Workshop...
Stock Image
Metalwork and Machining Hints and Tips (Workshop Practice)
Published by
Specialist Interest Model Books ltd, 1988
ISBN 10: 0852429479
ISBN 13: 9780852429471
Used
Paperback
Seller: ThriftBooks-Dallas, Dallas, TX, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less. Seller Inventory # G0852429479I4N00
Seller Image
Metalwork and Machining Hints and Tips: 20 (Workshop Practice Series)
Published by
Special Interest Model Books, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
Used
Softcover
Seller: WeBuyBooks, Rossendale, LANCS, United Kingdom
Seller rating 5 out of 5 stars
Condition: Good. Most items will be dispatched the same or the next working day. A copy that has been read but remains in clean condition. All of the pages are intact and the cover is intact and the spine may show signs of wear. The book may have minor markings which are not specifically mentioned. Seller Inventory # wbs2094810477
Buy Used
£ 1.05
£ 4.70 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Seller Image
Metalwork and Machining Hints and Tips: 20 (Workshop Practice Series)
Published by
Special Interest Model Books, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
Used
Softcover
Seller: WeBuyBooks, Rossendale, LANCS, United Kingdom
Seller rating 5 out of 5 stars
Condition: Like New. Most items will be dispatched the same or the next working day. An apparently unread copy in perfect condition. Dust cover is intact with no nicks or tears. Spine has no signs of creasing. Pages are clean and not marred by notes or folds of any kind. Seller Inventory # wbs3535273168
Buy Used
£ 1.05
£ 4.70 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Stock Image
Metalwork and Machining Hints and Tips (Workshop Practice)
Published by
Specialist Interest Model Books ltd, 1988
ISBN 10: 0852429479
ISBN 13: 9780852429471
Used
Softcover
Seller: Wonder Book, Frederick, MD, U.S.A.
Seller rating 5 out of 5 stars
Condition: As New. Like New condition. Book 20. A near perfect copy that may have very minor cosmetic defects. Seller Inventory # T07A-05409
Stock Image
Metalwork and Machining Hints and Tips
Published by
Specialist Interest Model Books ltd, 1988
ISBN 10: 0852429479
ISBN 13: 9780852429471
Used
Softcover
Seller: Better World Books: West, Reno, NV, U.S.A.
Seller rating 5 out of 5 stars
Condition: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good. Seller Inventory # GRP13610150
Stock Image
Metalwork and Machining Hints and Tips: 20 (Workshop Practice Series)
Seller: AwesomeBooks, Wallingford, United Kingdom
Seller rating 5 out of 5 stars
paperback. Condition: Very Good. Metalwork and Machining Hints and Tips: 20 (Workshop Practice Series) This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. Seller Inventory # 7719-9780852429471
Buy Used
£ 3.11
£ 4.99 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 2 available
Stock Image
Metalwork and Machining Hints and Tips (Workshop Practice)
Published by
Special Interest Model Books, 1987
ISBN 10: 0852429479
ISBN 13: 9780852429471
Used
Paperback
Seller: Reuseabook, Gloucester, GLOS, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: Used; Good. Dispatched, from the UK, within 48 hours of ordering. This book is in good condition but will show signs of previous ownership. Please expect some creasing to the spine and/or minor damage to the cover. Damaged cover. The cover of is slightly damaged for instance a torn or bent corner. Seller Inventory # CHL10707727
Buy Used
£ 2.91
£ 5.50 shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: 1 available
Seller Image
Metalwork and Machining Hints and Tips
Published by
Fox Chapel Publishers International, GB, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
New
Paperback
Seller: Rarewaves.com USA, London, LONDO, United Kingdom
Seller rating 5 out of 5 stars
Paperback. Condition: New. Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop. Seller Inventory # LU-9780852429471
Buy New
£ 14.03
Free Shipping
Ships from United Kingdom to U.S.A.
Ships from United Kingdom to U.S.A.
Quantity: Over 20 available
Seller Image
Metalwork and Machining Hints and Tips (Paperback)
Published by
Fox Chapel Publishers International, Hemel Hempstead, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
New
Paperback
Seller: Grand Eagle Retail, Bensenville, IL, U.S.A.
Seller rating 5 out of 5 stars
Paperback. Condition: new. Paperback. Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop. A workshop information anthology combining useful advice and instruction for beginners, with explanations of tools and techniques often familiar in name but not always found described in detail. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Seller Inventory # 9780852429471
Stock Image
Metalwork and Machining Hints and Tips
Published by
Fox Chapel Publishers International, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
New
PAP
Seller: PBShop.store US, Wood Dale, IL, U.S.A.
Seller rating 5 out of 5 stars
PAP. Condition: New. New Book. Shipped from UK. Established seller since 2000. Seller Inventory # FV-9780852429471