High-Speed CMOS Circuits for Optical Receivers - Hardcover

Savoj, Jafar; Razavi, Behzad

Hardcover

ISBN 10: 079237388X ISBN 13: 9780792373889

Publisher: Springer, 2001

Synopsis

With the exponential growth of the number of Internet nodes, the volume of the data transported on the backbone has increased with the same trend. The load of the global Internet backbone will soon increase to tens of terabits per second. This indicates that the backbone bandwidth requirements will increase by a factor of 50 to 100 every seven years. Transportation of such high volumes of data requires suitable media with low loss and high bandwidth. Among the available transmission media, optical fibers achieve the best performance in terms of loss and bandwidth. High-speed data can be transported over hundreds of kilometers of single-mode fiber without significant loss in signal integrity. These fibers progressively benefit from reduction of cost and improvement of perf- mance. Meanwhile, the electronic interfaces used in an optical network are not capable of exploiting the ultimate bandwidth of the fiber, limiting the throughput of the network. Different solutions at both the system and the circuit levels have been proposed to increase the data rate of the backbone. System-level solutions are based on the utilization of wave-division multiplexing (WDM), using different colors of light to transmit s- eral sequences simultaneously. In parallel with that, a great deal of effort has been put into increasing the operating rate of the electronic transceivers using highly-developed fabrication processes and novel c- cuit techniques.

About this title

Synopsis

The exponential growth of the number of internet nodes has suddenly created a widespread demand for high-speed optical and electronic devices, circuits, and systems. The new optical revolution has replaced modular, general-purpose building blocks by end-to-end solutions. Greater levels of integration on a single chip enable higher performance and lower cost. The mainstream VLSI technologies such as BiCmos and CMOS continue to take over the territories thus far claimed by GaAs and InP devices. This calls for an up-to-date book describing the design of high-speed electronic circuits for optical communication using modern techniques in a low-cost CMOS process."High-Speed CMOS Circuits for Optical Receivers" covers the design of the world's first and second 10 Gb/s clock and data recovery circuits fabricated in a pure CMOS process. The second prototype meets some of the critical requirements recommended by the SONET OC-192 standard. The clock and data recovery circuits consume a power several times lower than in prototypes built in other fabrication processes.

"High-Speed CMOS Circuits for Optical Receivers" describes novel techniques for implementation of such high-speed, high-performance circuits in a pure CMOS process. "High-Speed CMOS Circuits for Optical Receivers" is written for researchers and students interested in high-speed and mixed-mode circuit design with focus on CMOS circuit techniques. Designers working on various high-speed circuit projects for data communication, including optical com., giga bit ethernet will also find it of interest.

Edition details

• Publisher: Springer
• Publication date: 2001
• ISBN 10: 079237388X
• ISBN 13: 9780792373889
• Binding: Hardcover
• Language: English
• Number of pages: 138