The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
"synopsis" may belong to another edition of this title.
This volume contains 50 contributions presented at the symposium "Fatigue under Thermal and Mechanical Loading". The symposium addressed the mechanisms, mechanics and modelling of thermal and thermal-mechanical load effects on conventional and advanced structural materials. The proceedings provide an update of the research efforts in thermal and thermal-mechanical fatigue. The papers cover a wide range of materials, including metallic alloys from steels to advanced superalloy single crystals, ceramics as well as composites. Topics encompass recent developments in specimen and component testing techniques, mechanisms and mechanics of inelastic deformation, crack initiation and crack growth, as well as damage modelling for life-time prediction. The book should be of interest to materials scientists, mechanical engineers and design engineers involved in the design of components for use at high temperatures.
"About this title" may belong to another edition of this title.
Shipping:
£ 37.82
From Germany to U.S.A.
Shipping:
£ 9.98
From United Kingdom to U.S.A.
Seller: Buchpark, Trebbin, Germany
Condition: Sehr gut. Zustand: Sehr gut - Gepflegter, sauberer Zustand. Aus der Auflösung einer renommierten Bibliothek. Kann Stempel beinhalten. | Seiten: 524 | Sprache: Englisch | Produktart: Bücher. Seller Inventory # 1626049/202
Quantity: 1 available
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book. Seller Inventory # ria9780792339939_lsuk
Quantity: Over 20 available
Seller: moluna, Greven, Germany
Gebunden. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 The International Symposium Fatigue under Thermal and Mechanical Loading , held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Adv. Seller Inventory # 5967738
Quantity: Over 20 available
Seller: GreatBookPricesUK, Castle Donington, DERBY, United Kingdom
Condition: New. Seller Inventory # 1204929-n
Quantity: 5 available
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Condition: New. Seller Inventory # 1204929-n
Quantity: 5 available
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. 524 pp. Englisch. Seller Inventory # 9780792339939
Quantity: 2 available
Seller: booksXpress, Bayonne, NJ, U.S.A.
Hardcover. Condition: new. Seller Inventory # 9780792339939
Quantity: 3 available
Seller: AHA-BUCH GmbH, Einbeck, Germany
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. Seller Inventory # 9780792339939
Quantity: 1 available
Seller: GreatBookPricesUK, Castle Donington, DERBY, United Kingdom
Condition: As New. Unread book in perfect condition. Seller Inventory # 1204929
Quantity: 5 available
Seller: Mispah books, Redhill, SURRE, United Kingdom
Hardcover. Condition: Like New. Like New. book. Seller Inventory # ERICA77307923399326
Quantity: 1 available