Published by Epubli
ISBN 10: 3758494494 ISBN 13: 9783758494499
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Tunneling cracks in the adhesive layer of the trailing-edge joint can be initiated early in the lifetime of a wind turbine blade. Two major types of loads affect the crack initiation: thermal residual stresses that develop during manufacture, and mechanical stresses due to operating loads. Although giving consideration solely to the longitudinal stress component, which contributes mainly to the fatigue, is state-of-the-art, the current design guideline encourages designers to also take account of other stress components, i.e., peel and shear stresses. Hence, this research investigates the impact of the multi-axial stress state due to cyclic loading on the tunneling crack initiation in order to develop an engineering approach for predicting the number of load cycles toward crack initiation. The validity of the approach was proved in a cyclic full-scale test through the good agreement between the prediction of the approach parametrized with simulated test loads and observations on crack initiation made during the cyclic test. The thermal residual stress at the inner adhesive edge dominated the crack initiation. 200 pp. Englisch.
Published by Epubli
ISBN 10: 3758494494 ISBN 13: 9783758494499
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - Tunneling cracks in the adhesive layer of the trailing-edge joint can be initiated early in the lifetime of a wind turbine blade. Two major types of loads affect the crack initiation: thermal residual stresses that develop during manufacture, and mechanical stresses due to operating loads. Although giving consideration solely to the longitudinal stress component, which contributes mainly to the fatigue, is state-of-the-art, the current design guideline encourages designers to also take account of other stress components, i.e., peel and shear stresses. Hence, this research investigates the impact of the multi-axial stress state due to cyclic loading on the tunneling crack initiation in order to develop an engineering approach for predicting the number of load cycles toward crack initiation. The validity of the approach was proved in a cyclic full-scale test through the good agreement between the prediction of the approach parametrized with simulated test loads and observations on crack initiation made during the cyclic test. The thermal residual stress at the inner adhesive edge dominated the crack initiation.
Published by epubli
ISBN 10: 3758494494 ISBN 13: 9783758494499
Seller: moluna, Greven, Germany
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Tunneling cracks in wind turbine blades result from thermal and mechanical stresses. This research investigates multi-axial stress impact on crack initiation for better load cycle prediction.Tunneling cracks in the adhesive layer of the trailing-edge jo.
Published by Springer, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: Librairie Parrêsia, Figeac, France
Paperback. Condition: Used: Good. Academic Publishers, 1996, in-8 cartonnage éditeur, 505 pages. Couverture en bel état. Intérieur frais. Exemplaire de bibliothèque : petit code barre en pied de 1re de couv., cotation au dos, rares et discrets petits tampons à l?intérieur de l?ouvrage. [BT9+].
Published by Springer, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: Librairie Parrêsia, Figeac, France
Paperback. Condition: Used: Very Good. Academic Publishers, 1996, in-8 cartonnage éditeur, 505 pages. Couverture en bel état. Intérieur frais. Exemplaire de bibliothèque : petit code barre en pied de 1re de couv., cotation au dos, rares et discrets petits tampons à l?intérieur de l?ouvrage. [BT9+].
Published by Springer Netherlands, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: Buchpark, Trebbin, Germany
Condition: Sehr gut. Zustand: Sehr gut - Gepflegter, sauberer Zustand. Aus der Auflösung einer renommierten Bibliothek. Kann Stempel beinhalten. | Seiten: 524 | Sprache: Englisch | Produktart: Bücher.
Published by Springer, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: booksXpress, Bayonne, NJ, U.S.A.
Soft Cover. Condition: new. This item is printed on demand.
Published by Springer, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: Lucky's Textbooks, Dallas, TX, U.S.A.
Condition: New.
Published by Springer, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: Ria Christie Collections, Uxbridge, United Kingdom
Condition: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book.
Published by Springer Netherlands, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: moluna, Greven, Germany
Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 The International Symposium Fatigue under Thermal and Mechanical Loading , held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Adv.
Published by Springer Netherlands, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: moluna, Greven, Germany
Gebunden. Condition: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 The International Symposium Fatigue under Thermal and Mechanical Loading , held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Adv.
Published by Springer, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: GreatBookPricesUK, Castle Donington, DERBY, United Kingdom
Condition: New.
Published by Springer, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Condition: New.
Published by Springer Netherlands Apr 1996, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Buch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. 524 pp. Englisch.
Published by Springer, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: booksXpress, Bayonne, NJ, U.S.A.
Hardcover. Condition: new.
Published by Springer Netherlands, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: AHA-BUCH GmbH, Einbeck, Germany
Buch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
Published by Springer Netherlands, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: AHA-BUCH GmbH, Einbeck, Germany
Taschenbuch. Condition: Neu. Druck auf Anfrage Neuware - Printed after ordering - The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
Published by Springer Netherlands, 1996
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: Revaluation Books, Exeter, United Kingdom
Paperback. Condition: Brand New. 520 pages. 9.25x6.10x1.18 inches. In Stock.
Published by Springer Netherlands Dez 2010, 2010
ISBN 10: 9048146887 ISBN 13: 9789048146888
Seller: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germany
Taschenbuch. Condition: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. 520 pp. Englisch.
Published by Springer, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: GreatBookPricesUK, Castle Donington, DERBY, United Kingdom
Condition: As New. Unread book in perfect condition.
Published by Springer, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: Mispah books, Redhill, SURRE, United Kingdom
Hardcover. Condition: Like New. Like New. book.
Published by Springer, 1996
ISBN 10: 0792339932 ISBN 13: 9780792339939
Seller: GreatBookPrices, Columbia, MD, U.S.A.
Condition: As New. Unread book in perfect condition.